"Could not connect to the server Game Center"

Similar Questions

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

  My 6500 a is connected to the internet and I am able to print wireless.

  When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

  I get the message error "this printer could not connect to the server.

  I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

  Any ideas?

  From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• Calc Manager of error "could not connect to the server Dimension."

  Could not connect to the server of Dimension.

  Please make sure that the required services are started.

  https://servername:19443 / HyperionPlanning/servlet/HspAppManagerServlet:

  Connection refused: connect.

  Hyperion Planning - 11.1.2.3

  can someone help me.

  Thank you

  Follow the steps below-

  -Stop all services
  -Run the Oracle's EPM System Configurator (all Instances)
  -Select Hyperion Foundation-> the common settings and configure the Web server
  -Click next and deselect ' use SSL for Java web Application Server Communication (requires manual configuration).
  -Go through the process and finishing
  -start the EMP Services

  Thank you

  ~ KKT ~.

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Problems with wild tangent error "Could not connect to the server."

  Original title: wrong with wild tangent

  I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game

  Hello

  What operating system is installed on the computer?

  The error is that she's trying to connect to wild tangent, but unable to complete the connection.

   

  Method 1: You can disable the security software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2: Optimize the Internet Explorer browser.

  Reference:

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• Could not connect to the server. Please check connectivity and server address

  Hi all

  Today, when I connect my 9.5 (2) of the new ASA 5512 customer of office. My anyconnect popup warning 'Could not connect to server. "Please check address connectivity and the Internet server.

  I can ping and accessible by the asdm or ssh and my anyconnect can connect other 5512 ASA.

  Other desktop PC can also connect. Only my PC can't.

  I removed the other band of VPN client program. But always popup message even.

  I think that my PC has a problem. But I don't know how to fix it.

  Hello

  There may be several reasons behind it.

  Can I know you're only experiencing this issue?

  If yes could check you if you can remove the XML profile and test it:

  %ProgramData%\Cisco\Cisco AnyConnect secure mobility Client\Profile

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Counter Strike could not connect to the server steam.

  Original title: Counter Strike 1, steam, and windows 7 error...

  Hello everyone;
  I have counter strike 1 CD (anthology), and I want to install this game on my windows 7. But when I tried to install it, the steam gives an error (could not connect to steam network) to my computer. Now I'm wrong with my game and steam. Could you please help me on this. Thank you.

  Hello

  The question you have posted it will be better answered by steam team. Please visit the link below to find a community that will provide the best support.

  http://forums.steampowered.com/forums/forumdisplay.php?f=37

  It could be useful!

• Error: could not connect to the server DAW!

  
  Hello

  I just installed and created new repository for DAC but server DAC failled to start with error dialogbox to the client "error: could not establish a connection to the server DAW! I don't see the newspaper. I tried the modified online dac port still isn't working. Please notify. Thank you.

  DAC server started after the update the hostname in the client configuration page.

• HELP: CameraWindow DC "could not connect to the server.

  Just bought a Powershot SX280 HS.  This is a fantastic little camera.  I'm a Nikon guy for years, but this camera has really changed my mind.  I have, however, a challenge.  I am unable to complete the configuration of the camera through CameraWindow DC, as every time I try to 'Set Up Web Services' and connect, I get the message "Unable to connect to the server."  I am completely recorded and can log on and access to Canon Image Gateway, as well as download content.  WIFi tests well, and I am able to connect the camera to my iPhone and iPod.  Do you think that the server of the IGC is may be down on their end?  I am trying to complete Setup so that I can get the interface Fscebook and Twitter on the Powershot.  Thank you.

  I had the same problem with my ELPH HS 330 and called customer service yesterday. Here's what he had to get to fix:

  (1) in the 'Canon' under 'Program Files' folder that is created when you install the software, there is a subfolder named 'WirelessCameraConnectionSetting '. In this folder is an exe file called "WirelessCameraConnectionSetting.exe".  Double click it and go through prompt, as appropriate.

  (2) make sure that you have already created a user account on the Canon site.

  (3) check that your camera is recorded under your user profile. I had saved my camera before you create my user account, and so even though I had received an email congratulating me to save it, the camera was not associated with my user account, and it must be for the "configuration web access ' via CameraWindow can work.  In fact, there are a selection of 'extra features' called something like 'use Canon iMAGE Gateway' that should be checked on at registration so that you have the camera and the ability to use it via the web with your user profile.

  Once I did this, it worked very well. I responded to this topic in my survey customer service that they sent me yesterday evening. So I hope that they will provide a shot in packaging or a link on their site. But since I found this post on the forum seeking CameraWindow failed to connect to the server, I hope that if nothing else, others will find it before having to be called.

  I hope this has helped!

• I just added my computer outlook (2003) and I use my gmail email. But when I tried to add an outlook folder say he could not connect to the server and said I should be online. So I need help on adding files in appearance.

  How can I add folders in outlook? When I try to add a folder, an error message says, the connection to the server is unavailable. Outlook must be online or connected to complete this action.
  I'm online, and I do not have a server, confused! Anyone know what I need to do to fix this?

  Hello clayzee, welcome.

  I would say, because it would be a problem of Outlook and not so much a problem of Windows, that you transfer to communities in support of office below:
  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  They will be able to help with your question,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Safari gives message could not connect to the server

  I own 2 ipads on a mini, another one I air cushion, my I pad air works fine, it's my mini pad that I can't connect to my server

  You can compare the DNS settings for your WiFi network on both devices.

  You say 'my' server. It is a Web server with a domain name, etc, or is it a local server on your local network?