Could not find the calculation Manager option in the menu

Hi all

I have configured the calculation Manager in my machine [version: 11.1.2].] I can't find the calculation Manager option in the menu [Navigate-> administer-> calculation Manager].
Calculation Manager is running. Kindly guide me to overcome.

Thanks and greetings
Alizée

If calc manager has been installed after the configuration of the web, re-run the web comfiguration step. You may also cycle in the service of SST on the Foundation subsequently.

Kind regards

John A Booth

Tags: Business Intelligence

Similar Questions

  • Could not find the time stamp option in the historic window

    Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

    This is the most recent column visit.

    Have you looked in the menu ' views > show columns "in the library?

  • The system could not find the environment option that was entered.

    I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

    System restore
    Launch any program exe
    run cmd as administrator
    launch msconfig
    Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
    If it's a virus, he got by AVG free edition
    Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
    It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

    Is blowing the entire disk and back at my only option?

    Help!; 0

    Zitouni,

    Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

    Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

    Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

    Concerning

    Jeff

  • "I received a message to activate the firewall of windows as important, but when I try to turn it on it gives me" the systerm could not find the environment option.

    #corrected "tehe systerm could not find the environment option" in the title

    "the system could not find the environment option"

    Hi nickzino,

    (1) what is the complete error message you receive?

    (2) since when are you facing this problem?

    (3) remember you to make changes to the computer before this problem?

    Method 1: Let flow the fixit available in the link below and then check

    Security Warning: the Windows Firewall is disabled

    http://support.Microsoft.com/kb/2288085

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************

  • __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

    the system could not find the environment option that was entered

    Hi Yasish.P,

    Thank you for using the Microsoft Windows Vista Forums.

    I will need some additional information to help you best.

    O when you get this error message?

    Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command prompt, the following line, and then press ENTER:

    sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

    Follow the instructions in the link below for more information on scan SFC.

    http://support.Microsoft.com/kb/936212/

    You can see the link below for more information.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

    Please post back and let us know if it helped to solve your problem.

    Kind regards

    KarthiK TP

  • The system could not find the environment that has been entered - option Windows 7

    I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.


    I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.


    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

    I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.


    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

    This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.



    %ALLUSERSPROFILE%

    APPDATA

    ASL.log

    CLASSPATH

    COMPUTERNAME

    ComSpec

    FP_NO_HOST_CHECK

    HOMEDRIVE

    HOMEPATH

    LOCALAPPDATA

    LOGONSERVER

    NUMBER_OF_PROCESSORS

    OPERATING SYSTEM

    Path

    PATHEXT

    PROCESSOR_ARCHITECTURE

    PROCESSOR_IDENTIFIER

    PROCESSOR_LEVEL

    PROCESSOR_REVISION

    ProgramData

    GUEST

    PSModulePath

    PUBLIC

    QTJAVA

    NOMSESSION

    SystemDrive

    SystemRoot

    TEMP

    TMP

    USERDOMAIN

    USERNAME

    USERPROFILE

    WINDIR


    Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).

    Thank you very much.

    Nicholas C

    You can probably fix your problem by using the system restore. Here's how it works:
    1. keep tapping F8 during the first phase of startup.
    2. select Repair from the menu.
    3. Enter the administrator password when you are prompted. It is often empty.
    4. When you are prompted, select System Restore.
    5. set Windows to a point before this problem occurred.

  • System could not find the environment option that was entered.

    The Trend Micro Client caused a bit of stir in my computer.

    He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

    I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

    If it really comes down to it, how much memory should I backup everything?

    Hi Vey,

    Thanks for posting your query in the Microsoft community.

    Your system is connected to a domain network?

    This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

    I would suggest trying the following steps and check if these help to resolve the issue.

    1. start your system in safe mode.

    2. press on the Windows key + R.

    3. type sysdm.cpl , and then click OK.

    4. click on the "Advanced" tab

    5. in "Startup and recovery", click "Environment Variables".

    6. under "System Variables", click 'new '.

    7. for "Variable name", type in windir%

    8. for 'Value of the Variable', type in C:\Windows

    9. click OK on the all the dialog boxes that pop up.

    10. restart your system in normal mode.

    If, however, your system is connected to the normal mode, please see the following support article.

    Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

    Why Ai CC 2014, when I use a pathfinder on two objects tool, their anchor points break a bit from where they were? I search in all the nod to under VIEW options & could not find the culprit. Help, please!

    It looks like "snap to grid of pixels" just once more.

    Uncheck the box "align new objects to the pixel grid" in the menu of the transformation Panel.

    Select the objects and uncheck "snap to grid of pixels" in the transformation Panel.

  • Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

    Hi guys,.

    I have problems getting my sbRIO 9606 to deploy.

    Everything's fine until during the deployment process, I get this:

    Deployment of sbRIO 9606 chassis (sbRIO-9606)
    LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

    I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

    Please find attached the screenshots of my:

    • License Manager OR
    • Overview of the 9606 MAX
    • My project folder
    • Dialog box deployment where the error is displayed.

    -Adam

    Hi Tim,.

    In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

    The problem is that the recommended Software NI Scan Engine 3.0 installation program.

    The sbRIO 9606 does not support scanning engine.

    Once the scanning engine support has been uninstalled, I could deploy on my 9606.

  • Impossible to install XP SP3 (could not find the file specified)

    I looked at and followed the steps described in

    Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
     
    I do not have

    • Microsoft Shared Computer Toolkit
    • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

    I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

    I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.
     
    I tried to download SP3 directly from the Download Center - same results as before.
     
    I started the BITS service and tried again - same results as above.
     
    I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.
     

    I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

    I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

    I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

    You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.  Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

    Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

  • Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

    Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

    When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
    Tried the uninstall from Device Manager and restart the computer, still the same error.
    Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
    Checked Windows SP1 worked, still the same error.
    He got me completely baffled.
    Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
    I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
    Please help, I'm going crazy on this problem...

    The specifications of my devices are as follows:
    Computer
    Model:
    Alienware M14x
    Type of system:
    64-bit operating system
    Hard drive model:
    Portable Seagate Expansion 1 TB drive

    Hello

    28 error code means that the device was not fully installed.

    Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

    To open the Troubleshoot utility equipment follow the given link:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: You can update the drivers and check out them.

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Additional information.

    Install a USB device:

    http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    Hope this information helps.

  • "Could not find the main class" Java error on Windows 7, but not Windows XP

    Hi all

    It's the first app I try to package and virtualize with ThinApp.

    It is an old business application that usually runs on Windows XP SP3 x 86.

    The. MSI that I generated with Thinapp works very well when it is installed on a Windows XP SP3 x 86.

    However, our main goal to use Thinapp is to install on a Windows 7 SP1 x 64.

    But in doing so, the application triggers a Java Virtual Machine Launcher error message saying: "could not find the main class. Program will exit. »

    I thought that it was because the app includes a 1.4.2 JVM and that my XP has not any JVM pre-installed, but the main image on my W7 has a 1.7 JVM. But even after I uninstalled the 1.7 and installed JVM 1.4.2 on the W7 machine, I kept getting the error message so I guess that it is not bound.

    Y at - it an option that I missed during my MSI generation so that it can run on a Windows 7 x 64?

    Thank you all for your help.

    D.

    With the help of Lachi, we found that the app natively works on W7, no need for ThinApp it if the goal is just to make it work on W7, from a XP world.

    The only change we had to make (and the error was the same ThinApp-ed, which is what I originally shared) is that the application should work with Windows 7 in "classic" mode "of the screen (without Aero and the menu start XP-style). This is because the application runs an old integrated version of Java (1.4) and it makes the system calls seeking specific .dll to display, which are not accessible by default if Aero is enabled.

    Closed topic

  • iAssets could not find the ID of the person:

    Hi team,
    A fixed asset is created in the FA module. The asset is visible in the iAssets module. When the iAssets module is open error "could not find the ID of the person:" is visible at the top. Further when we search in the tab "Search" Asset assets & add to assets or save for later we get the error "cannot find an object with the name of EmployeeVO.

    Can someone help me with this problem.

    Thank you.

    The profile Type HR HR option: User is not set to the level of responsibility. The problem is resolved.

  • tkcrrsarc: (WARN) could not find the ARK of message (message: 0x10)

    I'm getting the following on my database warning
    Is is a serious question
    Please suggest some solutions...


    D:\oracle\product\10.2.0\admin\orcl\bdump\orcl_lgwr_4972.TRC dump file
    Mon Jan 21 16:59:27 2013
    ORACLE V10.2.0.4.0 - Production of 64-bit vsnsta = 0
    vsnsql = 14 vsnxtr = 3
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
    With partitioning, OLAP, Data Mining and Real Application Testing options
    Windows NT Version 6.0 Service Pack 1
    CPU: 16 - type 8664, 16 physical cores
    Process affinity: 0 x 0000000000000000
    Memory (success/Total): Ph: 61324 M / 65533 M, Ph + FCP: 176683 M / 193356 M
    Name of the instance: orcl

    Redo thread mounted by this instance: 1

    Oracle process number: 8

    Windows thread ID: 4972, image: ORACLE. EXE (LGWR)


    NAME OF THE SERVICE :() 16:59:27.654 2013-01-21
    SESSION ID: (880.1) 2013-01-21 16:59:27.654
    tkcrrsarc: (WARN) could not find the ARK of message (message: 0 x 1)
    tkcrrpa: Failed (WARN) first attempt to send message ARCH (message: 0 x 1)
    Maximum record size redo generation = 156160 bytes
    Redo size maximum generation change vector = 150676 bytes
    tkcrrsarc: (WARN) could not find the ARK of message (message: 0x10)
    tkcrrpa: Failed (WARN) first attempt to send message ARCH (message: 0x10)
    23:56:18.591 2013-01-21
    WARNING: Log write time 550 m, size 1 KB
    00:37:43.391 2013-01-22
    WARNING: Log write time 1180ms, size 2 KB
    09:42:03.185 2013-01-22
    WARNING: Log write time 550 m, size 2 KB

    Have a read of metalink 375229.1

    It says that this message is informational only, so it is safe to ignore.
    He also hit the value of log_archive_max_processes to more than 10 can solve the problem
    Finally, they say that it is a bug that is corrected in different versions. Then maybe an upgrade is in order?

  • (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

    Hello

    I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

    Here are the features:

    Software: Client VMware Converter standalone 4.0.1

    Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

    Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

    VMware farm: ESXi 4.1

    Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

    I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

    My research, it is likely due to software mirror, implying to dynamic disks.

    But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

    A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

    I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

    Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

    Attached files: boot.ini and newspapers

    What can I do to convert my machine?

    Thank you and sorry for my English

    =====================================================================================================

    Hello

    I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

    Here are the features:

    Software: Client VMware converter standalone 4.0.1

    Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

    Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

    VMware farm: ESXi 4.1

    Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

    I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

    According to my research, it is probably due to the software mirror, which created from dynamic disks.

    Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

    A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

    I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

    Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

    What can I do pour machine to convert my?

    Thank you

    Have you tried

    Try the option "set up the machine" of the converter against the vmx file that you already have.

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • Application Plugin error - could not find the entry Point (48::72)

    Hi all

    Anyone who bought my plugin has reported these errors when applying:

    invalid filter (25::3)

    could not find the main entry point for myplugin.plugin (48::72)

    They use CS6 on Snow Leopard on a Mac Pro 3.1 10.6.8 so this should work very well (the effect was compiled as a 64-bit using the latest XCode plugin, the Mountain Lion 10.8.5).

    I was wondering if anyone here has had this problem, and how they have solved.

    Thank you!

    Christian

    We managed to repro this on a machine running OS x 10.7.

    It turns out that it was probably due to one of the two parameters of generation in XCode:

    Basis of SDK, that I put OS X 10.9, and (most likely) OS X deployment target, which is the default value for the compiler. By reducing the Base SDKS to 10.8 and setting the target of 10.5 deployment. This fixed the problem on the machine 10.7.

    Waiting for the user who reported the problem to confirm the re-compiled version works on his workstation. However, I thought that I would put the solution here, just in case someone else has this problem in the future.

    Christian

Maybe you are looking for

  • How to cancel a Rescue and Recovery

    Hi, I have a Lenovo X 61 laptop. My hard drive has been divided into two partitions: operating system and data. Recently, I found that my Windows was no longer able to boot. I managed to install Windows 7 in OS partition. All my files in the second p

  • Look at a SD card. How?

    How can I see what is on my SD card? I can find where to display the memory used and this info, but not the display of what is actually on the map. I hope that something I recorded in Ringdroid has been stored, because it looked like he was saving, b

  • SVCHost shows 100% CPU usage in Task Manager

    Original title: svchost I have big problems with svchost grabbing all my resources when I turn on first. It seizes slowly up to 100% resources and my computer runsextremely for several minutes. I was told that it is an essential part of microsoft but

  • Windows MovieMaker has encountered a problem and needs to close. We are sorry for the inconvience.

    Why does this message appear whenever I try to use this program?

  • Error message Scanner HP 7500 has large Format

    I have a 1 - year, 7500 HP all-in-One printer/scanner/copier/fax.  3 months ago the bar scanner has started making a grunting noise when its start and restart and then suddenly stuck.  I have fiddeled autour and I've tried doing a hard reboot by pull