Similar Questions

• First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

  Help, please!

  Hi Brigitte,.

  Go to the following location and rename the folder in the name of old_folder

  User/user/library/Application Support and rename the Adobe folder

  User/Library/Preferences and rename the Adobe folder

  Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

  Make sure that you are in the library of the user if you are not sure to check out the link below.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Kind regards

  Vinay

• Impossible to install XP SP3 (could not find the file specified)

  I looked at and followed the steps described in

  Article ID: 950717 - steps to take before you install Windows XP Service Pack 3
   
  I do not have

  • Microsoft Shared Computer Toolkit
  • Pack MUI Remote Desktop Connection (RDP) 6.0 (update 925877 for Windows XP)

  I tried to install SP3 with and without my Antivirus, Antispyware and firewall running programs (several times – 4, 5, or more).  Each time, I get an error staing "could not find the specified file."  Then after being told that SP3 can not be installed and that "Windows XP has been partially updated and may not work properly", I have to restart my system.

  I also followed all the steps in this article (Article ID: 950718 - how to troubleshoot an installation fails in Windows XP Service Pack 3) and still the same thing as above.

   

  I tried to download SP3 directly from the Download Center - same results as before.

   

  I started the BITS service and tried again - same results as above.

   

  I've disabled auto updates and removed to software distribution (download renamed folder as shown) - same results as shown above.

   

  I tried to restore my system to an earlier date - 4 these attempts using different dates and set points during the last wee - ALL have failed.

  I also tried the proposals 1 to 3 in this article (Article ID: 950249-how to remove Windows XP Service Pack 3 from your computer), and none of these steps worked.

  I spent over 8 hours today and yesterday a couple just trying to solve this problem and still don't get anywhere.  I am beyond frustrated at this point.  I know that say Windows can not work properly, and I need my computer to do my job.  Any help would be appreciated.

  You could do a repair installation with a CD of Windows XP with SP3 integrated already.  However, unless this is a new installation that you have installed SP2 on so you could get then SP3 installed on it - you have obviously been broadcast for some time without a lot of fixed security and tastes and your system could very well be stripped because of this.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 11 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you need to do before you install Windows XP SP3:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  Come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.

  Once the computer has been put by the top meat grinder (do it all, like data. even if you JUST did some of them) - download you ' HE Installer "SP3, save it to your desktop, restart and login as an administrator and run this file, following the signs.

• Netflix in Media Player error: "we could not load the video player.

  I recently installed the add-on Netflix to my Windows Media Player.  It was working fine (though I don't find Windows Media Player to be a great product) but now when I try to play something Netflix I get two error reading - each other.

  • The first read error is: "we could not load the video player.
  • The other on another pop up window begins with: an error has occurred in the script on this page. "There are so many lines with details and a URL, then he asks:" do you want to continue running scripts on this page? "With radio buttons or not.

  I tried to uninstall the add-on from Netflix and reinstall - but that does not change.

  I thought to uninstall Windows Media Player and reinstall - but I can't even figure out how to do this.

  All of the suggestions.

  Thank you-

  Alonzo

  Download and install the latest version of Silverlight.

• Premiere Pro could not find capable video game modules - SUDDENLY

  I've worked without a problem for a few weeks and then...

  My mouse and keyboard went strange so I did a reboot and then PP 2014 would not start with the error:

  Premiere Pro could not find capable video game modules

  I tried AE and it doesn't load or the other. I have still CS6 on my system and who does not. My Nvidia card is a Quadro FX 1800 (which it is not serve me too well right now, but that worked) - when I got the message I've updated the driver for Nvidia. I noticed another thread about the problems with graphics cards double and I was wondering if the 3D Nvidia drivers could ask questions.

  I have a HP Z600 20 gig Ram Nvidia Quadro FX 1800 W7 Ultimate ongoing updated...

  Wacom Intuos Pro Med

  Dual graphics cards comes into play AND if you have an NVidia card a chip on the motherboard

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• First Pro CC stalls on - ImporterQuickTime.prm - 'could not find capable video game modules.

  First Pro CC stalls on "ImporterQuickTime.prm", and then it crashes with a message error "Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. "I have tried the solutions on the page support and several I found on the internet. I tried completely uninstalling Quicktime as well and it recharged. It still crashes. I have my original CS6 on my computer as well and it does not crash. All great ideas?

  Thank you

  Robert

  Thanks again John for help,.

  It turns out that the problem was (kinda sorta) display drivers. The index was the stall at ImporterQuickTime.prm followed by the error screen that refers to the inability to find a suitable driver. Many years ago I tested the JAWS software for I can have a better understanding of what vision hearing person with a disability during the analysis of a website accessible. I've never bothered to remove this software. When I checked my devices on Windows drivers, I discovered that I had a virtual mirror of Freedom Scientific (the creators of JAWS) driver. After you remove the software and driver, I was able to open the first Pro CC normally, even after repeated tests and restarting my computer. It worked perfectly every time.

  Regarding my previous success (and shortly after failure), I'm still distraught as to why it worked, even temporarily.

  It is a cause of the moat of the failure and the fix probably will not help everyone.

  Kind regards

  Robert

• Application Plugin error - could not find the entry Point (48::72)

  Hi all

  Anyone who bought my plugin has reported these errors when applying:

  invalid filter (25::3)

  could not find the main entry point for myplugin.plugin (48::72)

  They use CS6 on Snow Leopard on a Mac Pro 3.1 10.6.8 so this should work very well (the effect was compiled as a 64-bit using the latest XCode plugin, the Mountain Lion 10.8.5).

  I was wondering if anyone here has had this problem, and how they have solved.

  Thank you!

  Christian

  We managed to repro this on a machine running OS x 10.7.

  It turns out that it was probably due to one of the two parameters of generation in XCode:

  Basis of SDK, that I put OS X 10.9, and (most likely) OS X deployment target, which is the default value for the compiler. By reducing the Base SDKS to 10.8 and setting the target of 10.5 deployment. This fixed the problem on the machine 10.7.

  Waiting for the user who reported the problem to confirm the re-compiled version works on his workstation. However, I thought that I would put the solution here, just in case someone else has this problem in the future.

  Christian

• Premiere Pro CS6 could not find capable video game modules.

  Hello everyone. I just bought the Production Premium CS6 and when I try to start the first I get this error message: "Adobe Premiere Pro could not find capable video game modules. "Your video please put updated display drivers and try again." This message comes after she tries to load the file importerquicktime. I tried to uninstall the software and reinstall anything will do. In fact, now I get also three other error boxes that all say: ' LoadLibrary failed with error 126: the specified module could not be found. " I did an extensive search online over the past two days to try to solve my problem myself... but nothing, I tried worked. I even read through all the threads already posted on these forums. Does anyone have any suggestions? Before posting, here are the things I've already tried as well as some technical:

  HP Pavilion dv7 Notebook PC

  Windows 7 (64-bit)

  8 GB RAM

  Intel Core i7-2630QM CPU @ 2.00GHz

  F.13 BIOS (25/04/2011)

  AMD Radeon HD 6700 M Series (driver version: 8.980.0.0)

  Mobile Intel HD Graphics (driver version: 8.830.6.2000)

  • I tried to uninstall the software.
  • I tried to update my drivers for both of the graphics cards (even if one of them do not have an update, it seems)
  • I run the software as an administrator.
  • I tried to go to the display settings and disable the Intel card. (this because low resolution that is unexceptable)
  • I went to the Catalyst Control Center and put the first to 'High Power' which is supposed to use the AMD card.
  • I open the BIOS, but there is no option to change anything graphical associates. (many people have to tell people to change switchable graphics set here, but I don't have any option)
  • I took my battery.
  • I uninstalled quicktime and reinstalled the latest version.
  • I downloaded and installed the latest version of first (as it was released the day before, I bought)

  I tried other things I think, but at this point, I have tried so many things, that I'm starting to forget. Nothing seems to work for me... I am wanting to use the first to edit this short video I want to release Wednesday, but this puts me behind. Any help is appreciated, thanks!

  BEST METHOD!

  I spent more than 24 hours to find a way to solve this problem. And that's...
  1. right click on desktop, and select switchable graphics properties.
  2. click on the Browse button and go to the folder of installation of Adobe premiere cs6
  3. Select cs6.exe first icon and click Open.
  4. set manually to high performance and click on apply.
  5. repeat the above instructions, once more and instead select premierecs6.exe, select GPUsniffer.exe, and click on open again.
  6 and set it to high performance and click on apply.
  7 enjoy CS6

• error - could not find capable video game modules

  First Pro CS5 - does not start after you install the 5.03 update. New machine with only Adobe Master collection installed, iCore 7-980, 12 GB DDR3, 3 drives sata and Nvidia FX 3800. error - could not find capable video game modules

  You may have been affected by the bug to "return to the trial" (do a forum search) where the solution is to uninstall and reinstall run the clean script 2 - 3 times

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?

• Satellite L500 - could not find the SRS audio device

  At the start of my Satellite L500, a message appears saying - could not find the device audio compatible srs. This has happened when I upgraded to windows 7.

  Can someone tell how to fix this?

  Hello

  I have the Satellite L500 also but I couldn't t notice this problem. SRS audio device that has something to do with the audio driver, I think.

  What do you think to update this driver? You can get it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version I recommend you remove the old first. Do a restart and install the most recent.

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• could not find the drivers for window7 32 bit 15-d018TU hp

  Dear Sir, I recently bought 15-d018TU with window 8.

  I installed 32 bit Windows 7.

  but I could not find the drivers for window7 32 bit.

  I need drivers now

  1 network cards

  Bluetooth 2 controller

  3 network controller

  4 PCI simple communication controller

  5 SM bus controller

  USB 6 bus controllers

  7 Ethernet controller

  Hello:

  You should be able to use all the W7 32-bit drivers and software from the HP Probook 450 G0 on your model, except the audio.

  Your model uses the Intel HD graphics driver.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4052%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• Just upgraded to Windows 7 Pro. Could not find the normal system games (solitaire, spider solitaire,... etc.). Where are they?

  I have just upgraded to Windows 7 Pro.  Could not find the normal system of games (Solitaire, solitaire spider, mine sweeper, etc.).  Where are they?

  Go to control panel > programs and features > turn Windows features on or off and place a check next to games and click OK. Carey Frisch