Could not get WiFi to work on E1200

Similar Questions

• L755-154 satellite - could not get WiFi to work

  Hello

  I have a Satellite L755-154 runs a new copy of Windows 7, but I can't get the WIRELESS to work at all.

  Someone at - it a link to the drivers concerned? (Windows 7 64-bit)

  I don't see any network adapter wireless device settings? just the Ethernet connection.

  Thanks for any help.

  see you soon

  Sam

  Hello
  I have the same problem.

  I have a Satellite L755-175 runs a new copy of Windows 7 Ultimate, but I also can't seem to get the WIFI to work at all.
  I downloaded drivers from the corresponding page in the drivers for Satellite L755-175 (Windows 7 64-bit) (also tried 32 bit). But do not install drivers.

  I don't see any network adapter wireless device settings? just the Ethernet connection.

  Thanks for any help.

  see you soon

  Brian

• Satellite A210-19Z: could not get internet to work with Windows XP installed

  Hello

  When I install Windows XP on my Satellite I can not get Internet to work

  Do I have to install drivers or so?
  Please post links to the drivers if so.

  Christian

  Of course you need readers.

  If you have connected your router with a LAN cable, then you will need to install the LAN driver. If you want to use the network WiFi WLan driver must be installed also.
  If your computer laptop doesn t supports the WLan card then the WLan driver is not required

  All the drivers (if available) XP can be downloaded from the European driver Toshiba page!

• Satellite A200-1ax: could not get the BT working on Win XP

  Hello

  I have a Toshiba laptop satellite a200-1ax. I installed Windows XP sp2.
  My problem is that I can't get the bluetooth work. I have installed a Toshiba bluetooth driver and nothing. When I try to install the bluetooth stack Toshiba the instalation stops at the driver part and won't. I tried, and left for more than 2 hours and it was not moving.

  When I opened my device manager there is no place where a bluetooth connection is mentioned. In the bluetooth of the 5 information system services where collapsed and to manual start. I tried to start manually services.msc, but there was no available bluetooth service.

  You have to add that I have 3 elements in with question marks Device Manager:
  1. mass storage controller
  2. feature modem on high definition audio bus
  3 PCI memory controller.

  If anyone can help with the problem of bluetooth, or three missing drivers, please do :)

  Hello

  The Bluetooth should work!
  The laptop supports the BT module, and I think that you have not properly installed.

  Firstly don mix t the monitor BT with BT stack. You need the BT stack!
  I think that you should remove the software BT OS and after that new reboot should try to reinstall again.

  Then you must enable BT using the Fn + F8 key to complete the configuration of BT!

  Other devices such as PCI memory controller and mass storage controller. Are not supported by Windows XP and therefore there is no drivers!

• Could not get wifi milestone to turn on

  I can't find anyone with the same issue I'm having if I'm here...

  I got the milestone from telus on renewal of contract yesterday, everything worked fine. Got home connected to my wifi as expected and later went to bed. Until today, is A time to work and set up an ad hoc wireless network. Enabled WiFi, but no network was found and I don't have the wifi icon in the status bar I saw yesterday.

  I know that ad-hoc installation is good because I checked with my ipod touch, there is no encryption or just to rule out it as a potential problem.

  I did a hard reset on the phone and still no dice, I can say that wifi is not yet light. Is there a known issue with the wifi on these phones? do I just not wasting my time and bring her back?

  Thank you

  No, he doesn't like that I don't think. The icon means "you are connected to a network", not being present.

  If you go into your settings > wireless & network > wifi settings, you should see a list of all networks, it can detect. Click on one of the people to connect.

• Portege S100: Could not get the microphone work

  Unable to get a response when trying to record audio. Have tried the Windows sound recorder, the recorder in OneNote and a Creative Writer with no luck.

  Have adjusted the volume - increase levels of reading and recording settings and clicked on 'choose' in the recording settings. Have you tried an external microphone. Have tried with computer attached to the port replicator and taken in isolation.

  I forgot something obvious?

  Hello

  I guess you can hear the noise and the audio driver is installed correctly.
  In Control Panel, you will find the SoundMax.
  Here, you can try to start the configuration of the Microphone. Also check the improvements of Microphone. There you can activate the recording of voice option
  On the power management tab, you need to change the option to no energy saving

  The other possibility is to check the Toshiba Mic Effects. Check if the Mic controller is set to max.

• Could not get the WIFI working

  Hi all

  I just put vista Home premium on my lappy.
  All the drivers are updated to vista, but still I can't get WiFi to work, no matter what I try.

  I am not "soft" to logical thinking, but I'm stumped! Good old ethernet works a treat, but completely unrealistic.

  any help on this home

  Many thanks, etc.

  @ marco_1uk
  I put t understand why you started a new thread to finish this theme.

  However for all those who read this thread please also check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22123

• Could not get an internet connection after installed antivirus software.

  I tried to install a software antivirus (Vipre) and it asks to restart the computer, and I did. When I restart the computer, the software could not continue for a reason, and I found that the computer could not get the connection with internet ("limited access"). While my other computers are still good connections with internet (wifi). Please tell us how to solve this problem. Thank you.

  Hello

  1. are you able to surf the internet?

  2. you use Internet Explorer browser to surf the internet? If so, which version?

  Let us try the following and see if they help.

  Method 1: See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Uninstall and reinstall wireless card driver and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can also try uninstalling the anti-virus Viper software and see if that helps.

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• Windows could not get a list of devices from Windows Update. Try again later

  Original title: Windows 7 list printers cannot be updated
  I installed a windows 32 bit 7 OS several weeks ago on my workstation Futitsu-Siemens and followed the instructions on the HP Wizard to try to install the HP Deskjet 990c printer driver for my HP 6122 printer. According to the HP Wizard, the only way to do is to update the list of printers by clicking on the "Windows Update" button in the dialog "add a printer".  I clicked on this button several dozen times in recent weeks, and every time I get the message "Windows could not get a list of devices from Windows Update. Try again later.

  I installed a windows 32 bit 7 BONES of several months on my HP laptop and the printer list updated without a hitch to include many more HP printers that are on my computer Futitsu-Siemens including HP 990c.

  What should I do?

  Here's what I found my system which is an Z210 64 HP running windows7. I just updated my Bios to v1.35

  What I did to get the update to work once and what I have to do each time to add another printer by using the Update window.

  1. open (Ctrl-Alt-Del) Task Manager

  2. click on tab of abuse, then Services button (bottom-right)

  3. under the name to find "Windows Update".

  4. right click "Windows Update" and select stop. do not close

  5. open the Exploper window and browse to C:\Windows

  6 delete the folder "C:\Windows\SoftwareDistribution".

  7. go back to served, right click on "Windows Update", and then select start

  Now the "Windows Update" button should work. For me I have to do every time I have to install a printer that requires me to use windows update

  Looking for what casues the error

  at the bottom of a file named WindowUpdate.log located in C:\Windows after that I get the message "Windows was unabel to...» "I have this text below.

  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * START * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * Online = Yes; Ignore download priority = No
  2012-04-30 14:20:18:782 284 5cc Agent * criteria = "Type ="Driver"and DeploymentAction = 'Installation' and DriverClass = 'Printer' and DriverMatch = 'Catalogue'"
  2012-04-30 14:20:18:782 284 5cc Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-04-30 14:20:18:782 284 5cc Agent * scope of search = {Machine}
  2012-04-30 14:20:19:952 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:19:952 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:20:030 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc PT +++ PT: Synchronizing server updates +++
  2012-04-30 14:20:20:030 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:22:183 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:183 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:214 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc PT +++ PT: synchronization of applicable printers +++
  2012-04-30 14:20:22:214 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SyncPrinterCatalog failed, error is 0x8024400D, the soap client error = 7, soap = 300, HTTP = 200 status code error code
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SOAP fault: 0x00012c
  2012-04-30 14:20:23:072 284 5cc PT WARNING: faultstring:Fault has occurred
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ErrorCode:InvalidParameters (7)
  2012-04-30 14:20:23:072 284 5cc PT WARNING: Message: printerUpdateIDs
  "" 2012-04-30 14:20:23:072 284 5cc PT WARNING: method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncPrinterCatalog"
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ID:fd5a6897-e20b-4a8f-a118-c9c791da6851
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:150 284 72 c to THE cannot perform scan non-interactive if AU is interactive only
  2012-04-30 14:20:23:150 284 5cc Agent * found 0 updates and 17 categories of research; rules apply rated 193 on 660 deployed entities
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:23:150 284 5cc Agent * END * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:28:162 284 5cc report REPORT EVENT: {C7177063-6BAB-4A17-AC0B-74B0D47355FA} 2012-04-30 14:20:23:150 - 0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success CDM Windows Update Client synchronization software detected 0 updates successfully.
  2012-04-30 14:20:28:162 284 5cc CWERReporter finish event management report. (00000000)

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.

• "Windows could not get a list of devices from windows update"

  I've been looking for a solution for several weeks now. Many people seem to have the same problem. But no one has yet been able to solve the problem.

  First of all, let me clarify the problem explicitly:

  In the Add Printer Wizard: "Windows could not get a list of devices from windows update"

  Specifically, the problem is that Windows Update *broken* in the Add Printer Wizard. (Windows Update, otherwise works fine. But not in the Add Printer Wizard.)

  Find a workaround to add the printer, which mostly does not work what I have read, would be only to solve the secondary problem of the addition of this printer. Except, it would not solve the main problem which is Windows Update *broken* in the Add Printer Wizard.

  Details:

  I have been setting up three new PC running Windows 7 Pro 64-bit. I had to add an old LaserJet 5if connected to a former print server. I created the IP Standard port, then clicked on the "Windows Update" button to update the list of printers. It worked on the first perfectly, as it has in the past with other computers to this place. Then I started to work on the other two at the same time. I'm lazy and started to perform several tasks such as installation of MS Office, Security Essentials (less than 10 units at this office, BTW), etc. while the Add Printer Wizard was updating the list of devices. One of these things, I can't remember which, required a reboot.

  And that is where I am certain that things broke. Restart has occurred while the two computers are in the middle of the list of loading from Windows Update System. I not interrupted the first PC. But the other two were interrupted and now they can't get a current list of Windows Update.

  I tried the FixIt tool at http://support.microsoft.com/kb/971058 . He says he detects a problem and claims to have fixed. Except, it isn't - little matter how many times I run.

  Ideally, the FixIt tool above must be updated or a new tool must be created by Microsoft to resolve this particular problem. Type of the error in any search engine, and you will see this question from several years back. It's happens often enough to justify the creation of Microsoft or update a FixIt tool.

  Any thoughts would be helpful.

  I have exactly and that no ONE reads what you say or what other people say everywhere. Only the upgrade Assistant printer does not... The update of the Printer Wizard do not work. Windows Update works fine.

  Ronday,
  You are right that if few people read what they respond to these forums. That's the kind of non-response, I found everywhere on the Internet about this issue. (The value of the community is sometimes over-rated, if you ask me). Apparently, using characters fat is not enough to focus on the fact that the issue is not with the printer compatibility since, as I said clearly A) this printer has installed fine several times in the past with the same OS and in the same office and B) that I clearly THE issue is that updated the list of devices , in the Printer Wizard, *Do NOT*!  
  However, I came across a suggestion on another site. I haven't had the chance to try it at the location of this particular customer - I'll do it later this month. Here is the link to the suggestion for you to try as well. Scroll to the end to ignore any non-response:
  http://www.techsupportforum.com/forums/F217/Windows-Update-not-updating-632025.html
  'Michel' made the following suggestion:
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Hi, most likely caused by one installation failed (not the Wizard), you need to do a bit of detective work, lets first try the easy solution: -.

  1. go to start, run and type regedit.

  2. go to the registry editor for

  HKLM\software\microsoft\windows\current version\installer\inprogress.

  3. click the inprogress key and note the name of the file contained on the

  right to databasepath (must be .msi extension).

  4 rename inprogress oldinprogress.

  5. close the registry editor.

  6. open my computer.

  7. navigate to C:\Windows\Installer (Installer file is hidden by)

  par_defaut, views folder check "show files and folders" also uncheck "Hide protected system files", do not forget to cancel it when you're done)) and rename the file noted in step 3.

  8 restart the computer and try the installation again.
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  If it works, then Michel deserves all the accessories. At least he or she tries to solve the real problem.

• Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

  System:

  Windows 7 (Service Pack 1)

  3720QM-i7 CPU @ 2.60 Ghz

  16 GB OF RAM

  Adobe Creative Suite Production Premium CS6

  I got a computer breakdown and both after effects and the first started crashing after that.

  I uninstalled then and since then I can not reinstall. I get this error message:

  Exit code: 7

  ERROR: DW013: could not get the root of inChildPath

  I tried:

  1. 1- Repair of Microsoft Visual C++ Redistributable Packages
  2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
  3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

  What is my next move?

  I have work to do.

  Thank you

  Stefan Vanderland

  Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• Error "could not get the audio data in the file.

  Hello

  I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

  I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

  Where can it be?

  Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

  I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.

• Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference.

  Hello
  
  We have integrated our portal customized with the AAU in document taskflows webcenter application.
  We are not able to view the Soum, extracted from the Complutense University of MADRID. Here's the error to get connected UCM whenever we access the application.
  
  Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference. Can not read the file. [Details]
  An error has occurred. The stack trace below shows more information.
  
  ! csUserEventMessage, anonymous, CIS! $! csCollectionUnableToGetReference! csCollectionCannotRead
  intradoc.common.ServiceException:! csCollectionUnableToGetReference! csCollectionCannotRead
  * ScriptStack COLLECTION_GET_REFERENCE
  3:getReferenceMeta, * no captured values *.
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
  at intradoc.server.Service.buildServiceException(Service.java:2260)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
  Collections. CollectionUserHandler.getReferenceMeta (CollectionUserHandler.java:1765)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:600)
  at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
  at intradoc.server.Service.doCodeEx(Service.java:533)
  at intradoc.server.Service.doCode(Service.java:505)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
  at intradoc.server.Service.doAction(Service.java:477)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
  at intradoc.server.Service.doActions(Service.java:472)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
  at intradoc.server.Service.executeActions(Service.java:458)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
  at intradoc.server.Service.doRequest(Service.java:1890)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  Kind regards
  Francis P

  What is the security group of your records? It is public.