Could not import the blackberry project

Similar Questions

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Could not import the sequence of a project to another

  I'm looking to import a sequence of a project in Adobe Premiere CS6 to a project in Adobe first CC. However, when I try to import the sequence, after that it says it is connected to the other project, no sequence shows to be imported into the window. In addition, if I try to import the entire project, it behaves as if it works correctly, but imports ultimately nothing. Is - this some glitch goes CS6 CC? Or y at - it another way to import a sequence. I tried to copy and paste, which does not seem work CS6 cc. I also tried drag and drop sequence, which also failed and crashed in fact CC altogether. Ideas or help on this would be much appreciated.

  Well, I found myself just export a XML of the CS6 project and it imported fine in the CC project...

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import the Photoshop PSD

  It's weird. Try to import a PSD file. Message body cs6 error is "we were unable to open the file on the disk."

  The file is a fixed image that came to me as a JPG. I've read it in Photoshop cs6, cropped it, because the canvas 1920 x 1080 (to match the size of the sequence of the organism), tinkered and ended by running the action of course broadcast on this subject Luminance. Then I saved it in the body as a project folder *. PSD file. As I did hundreds of times now with dozens of projects.

  Attends agency cs6. Find the file using media browser. File... Import media browser gives me a window with the error message "We cannot open the file on the disk." Preview the Source monitor fails.

  What makes this even more frustrating, it is that the organization can find and open the file that I worked on just before this one. Same conditions, same process, same repertoire, same protections on files (I checked that). Two files seem to be exactly the same except for the file name and the content of the file. Everything else is also identical to that I can do. And none of my hard drives are even half full, so it shouldn't be a question of space.

  So if the organization can read one, why can't he read the other? And what I can do to get the Organization to behave correctly and read the file? Files do not appear to be corrupt - Photoshop can read them both very well. In any case, I've recreated the problem from the source repeatedly *.jpg file now so I think I can exclude from Photoshop file corruption on. Perhaps.

  I ruined my brain for 90 minutes trying to understand what has changed between the first file that works and one that doesn't. I came up empty. I worked on one, then the other, then imported the first on body (which worked), and then imported from the other in the body (which failed). Exact same source (both files were attachments on e-mail even *.jpg), same workflow, saved in the same directory. ARGHHHH!

  I did most of the 'usual suspects '. I left off Photoshop both body and restarted. I saved the file problem in other formats (same error no matter what format). So, I turned to Teh Google, that does not turn a large part that relates. Could not find anything in the Adobe Help documentation. So everyone here tell me what is happening?

  --

  Bruce Watson

  Few things to check - is the color of the RGB PSD Mode. It cannot be CMYK, or some other.

  I had problems with dynamic objects, because sometimes, they import all right, but not always.

  Layers of tiny (a few pixels x pixels) were causing problems.

  Adjustment layers have been known to cause problems.

  Normal layers, so long not tiny, always worked perfectly for me.

  Anything else that comes to my mind, but good luck.

  Hunt

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Could not import the .fla files

  Good evening friends,

  I can't import the files flash adobe flash professional cs6. The message I get is:

  "One or more files could not be imported because the problem occurred during the import"

  I need quick help.

  Thank you in advance.

  Ersin

  Fortunately, that said asymmetric is not correct, as well not be what you were asking about.

  You can open any FLA of CS5.5 or later, in any version, CS5.5, or later. At this time they did the files be future-proof. New feature does not work and could lead to problems, but the file should open ok.

  But back to what you asked, you would never import a FLA, then don't means you that you try to import a SWF file? They are sovereign, there's a number of Flash Pro version where the ability to import SWF has been removed. Not sure if including CS6. Nowadays you can import SWF files, but you wouldn't get the ActionScript code.

  If the SWF file is set to be protected, then that would also lead to errors. You are much better if you can find the original Florida

• Could not import the m2ts in first CC 2015 files after having upgraded to Windows 10.

  Hello! I have a problem after having upgraded to Windows 10. Please help me.

  I upgraded the operating system to Windows 10 by windows update.

  After that, I had some problems with language settings keyboard, so I have made a new account.

  Now in my PC, there is first CS6, CC, CC2014, CC2015.

  After upgrade, I can not import M2TS in CS6, CC2014, CC2015, and latest projects with M2TS files cannot load those, just to show the question icon.

  When I try to import M2TS newly or connect, they show a popup message with "the file has an unsupported compression type.".

  Import M2TS is possible in CC.

  I want to know how to fix it.

  Trash all your media cache. Rename the folder in the files, and then try again.

• Could not import the XT10 (RAF) RAW files in Lightroom 5.7.1

  To the right,.

  
  I recently purchased Fuji XT10 camera (released in may 2015), after the shooting in RAW for a reason that the RAF files could not be imported to Lightroom 5. I updated my Lightroom 5 to the more up-to-date version 5.7.1. but still will not change a thing. I am reluctant to convert to DNG because Internet said RAF files retain better details/data to DNG.

  Someone will have a solution to this please, or if someone has the same problem?

  Thank you very much for your help!

  
  All the best,

  
  Josh

  Hello

  This camera (X-T-10, correct me if wrong) requires 6.1 Lightroom and Camera raw 9.1 devices supported by Camera Raw

  

  Please proceed to Lightroom 6 or DNG Converter allows you to convert your images to DNG

  Concerning

  ~ Assani

• Could not import the file .aec

  After doing a project and making it in Cinema 4 d, after that I tried to import the file, but nothing happened, the composition did not appear.

  Cinema 4 d rendering parameters: screenshot by Lightshot

  My system properties: screenshot by Lightshot

  Thanks for the help

  If you want to import a file of C4D, you have two choices: use Cineware to import a file of C4D (so using AE to make) or install the correct plugins of Maxon to import a FAC with camera, light, object null info and all your C4D rendered files.

  How to use Cineware: Details of CINEMA 4 d with After Effects integration

  Here's where to find the AEC-opening plugin: MAXON: 3D FOR THE REAL WORLD: Plugins

• Could not import the Clipboard because an unexpected end of file was encountered.

  This one is particularly annoying.  I use Creative Suite 2, Photoshop

  with Windows XP Pro.  I have the latest updates.

  When I open Photoshop, I constantly have the message "couldn't".

  import the Clipboard being an unexpected end of file

  met. "I hit [OK] and the message reappears in about 5 sec.

  I ran so much Photoshop as the first point of access on the computer (front for)

  all that is in the Clipboard) and I manually deleted the

  Clipboard.

  I have also reinstalled the CS2.

  Help, please...

  Operating instructions that can help you:

  (1) open Photoshop.

  (2) hold down 'Alt', 'Control' and 'Shift' at the same time as the launch of the program.

  (3) select the option to remove all of the current settings. All preferences and settings that you have changed will be returned to their default initial value.

  (4) close all applications and access your Photoshop plug-in folder. The location of this will depend on the version of Windows you are using. If you use a 32-bit edition, you'll find to "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins. If you use a 64-bit edition, you'll find in "C:/Program Files (x 86) / Adobe/Adobe Photoshop CS5 CS4/Plug-Ins or" or "C:/Program Files/Adobe/Adobe Photoshop CS5 or CS4/Plug-Ins.

  (5) select plug-ins not published by Adobe and follow the instructions to remove.

  (6) visit the Photoshop update page to find and apply updates for the version you are using.

  (7) relaunch Photoshop and try it.

  As alternatives could be presented...

  the http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/1486-error-message-in-psd-fi - ask questions and read the various cases of corruption of file .psd

  https://www.repairtoolbox.com/photoshoprepair.html Photoshop repair kit - one of the tools provided restoration of .psd files corrupt

• Could not import the platform of error

  Hello
  
  I started the 3.1.0 agent HQ (the version with the included JRE) on a RedHat Linux 9 server and runs the automatic detection of the console of the server process. He discovered the new server as it should, but when I clicked on the button "Add to inventory", I got an error (see below).
  
  Impossible to import the platform: RuntimeException. nested exception is: org.hyperic.hq.common.SystemException: javax.ejb.TransactionRolledbackLocalException: error creating data IA platform: servers of type "FileServer" could not be created on the "Home network" type platforms CausedByException is: creation of data IA platform error: type servers 'FileServer' cannot be created on platforms of type "home network".
  
  Why is this happening?
  
  Thank you
  Brian

  I think there may be a misunderstanding here.  When you say that you "ran the autodiscovery process", which means exactly?  You shouldn't have to do anything else that start the agent on the platform, and then set up your dashboard HQ.  The platform will appear in the queue of the self-inventory and you can then import the platform and all discovered resources.  This type platform sounds like it should be "Solaris" and not "network host.  HQ thinks that it is a network host, leads me to believe that you tried to create a platform manually instead of using the discovery platform created to start the agent.

  Try the following steps:
  1 stop the agent on the affected platform.
  2. remove any resource platform linked to this inventory of HQ
  3. delete the "data" of the installation of the Agent HQ directory
  4. start the Agent from HQ (you will need to provide the login information from server again)
  5. connect to Headquarters as the superuser and look in the auto - inventory of your dashboard portlet.  The platform should appear there.
  6. Select the platform and click on the button to import it into your inventory HQ

  It should work, if not answered and I will work with you to get your server.log and agent.log and troubleshoot more.

• Could not import the pdf file to the library in Flash CS4

  I need to import files of pdf text three in my Flash CS4 for use in a project that I am doing, but whenever I try to import these pdf files at the library I get an error that reads 'one or more files were not imported because he had problems reading of their.

  I use Adobe Reader X, which is the last available drive, Flash CS4 and Windows Vista Home Premium and I don't understand why I can't import PDFs in Flash. Any help would be greatly appreciated!

  Zlloyd

  PDF is not supported in flash file type.

• Could not import the class with CFCS

  I created a swc file.  I can import most of her classes in my project, no problem.  A single class, however, simply will not import.  I tried to copy the swc directly in the project, citing computer source folder, etc.  No dice.  The EFA relies very well so there is no error in the class.  The first lines of the class like this:

  package com.thismoment
  {
  import flash.events.Event;
  SerializableAttribute public class TakeEvent extends Event {}

  I should be able to import com.thismoment.TakeEvent; right?  It does not work.  I get "1046: Type was not found or is not a compilation constant: TakeEvent.»

  How can I find what is happening?  Is there a way to clear all the classes in a swc?

  Sorry if it's repetitive, but you confirmed that the class is visible outside the CFC? In the project "thismoment" go to your Flex Library Build Path settings and make sure that "include all the...» "is selected or that"TakeEvent"is selected in the tree.

  See attached screenshot.

  Jason San Jose

  Software engineer, Flash Builder