Could NOT IMPORT the panasonic DVX200. MOV 59, 94pp

Similar Questions

• Could not import the AVI in Movie Maker

  I am able to read these AVI files in WMP, but I'm unable to import into WMM. This is the error code I get.

  "The C:\Users\KLawrence\Documents\BackUpData\2010-04-27 23-17-09\ch01 - 20100419184710.avi file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  The files are from security DVR and I need to put then in a format to play in a standard DVD player.  If the codec is correct for WMP why they play in WMM? AVI is listed as a file format supported.

  Thanks in advance,

  Kevin

  I am able to read these AVI files in WMP, but I'm unable to import into WMM. This is the error code I get.

  "The C:\Users\KLawrence\Documents\BackUpData\2010-04-27 23-17-09\ch01 - 20100419184710.avi file cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. »

  The files are from security DVR and I need to put then in a format to play in a standard DVD player.  If the codec is correct for WMP why they play in WMM? AVI is listed as a file format supported.

  Thanks in advance,

  Kevin

  ==========================================
  Since you want a DVD... have you tried DVD Maker? If the file will be
  not import... it may be worth trying to convert it to .wmv format.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Could not import the MP3 for Movie maker

  I bought various music on Amazon MP3 files and downloaded. They play when you click it.

  BUT when I try to import some of them in MOVIE MAKER I get a message "Cannot import" without any explanation.

  Help!

  Thank you, David

  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the graphics issues experts, including the use of Movie Maker will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not import the music of Movie Maker

  I created a slide show using Movie Maker; then, I got my computer reconfigured.  Now, the music went from the presentation, and I can not re - upload the music I want.

  I created a slide show using Movie Maker; then, I got my computer reconfigured.  Now, the music went from the presentation, and I can not re - upload the music I want.

  ===================================
  If you have saved only the project... .mswmm file is not
  always include original and unless sources files
  Movie Maker available in their original locations cannot
  access it.

  If you see red Xs in Movie Maker instead of the source
  file thimbnails... you can click with the right button on the red Xs and browse
  the location of the source files if they are still available
  somewhere on your system.

  Next time, save your project in the. WMV video format
  also and it can be played on any Windows system
  Media Player.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import the song to itunes in windows movie maker

  codec of WMM?

  My work incredible WMM but when try to take a song on itunes and put it on there he said, "cannot be imported because the codec required to play the file is not installed on your computer.» If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file"I don't know what codec to install or download

  Convert music files to the WMA format and it
  import into Movie Maker successfully.

  There are many converters available on the net... the
  the following link is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your music files on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

• Could not import the digital camcorder, Kodak Zi8 videos to Windows Movie Maker

  KODAK IMPORT PROBLEMS. VIDEO TO WINDOWS MOVIE MAKER MOV CLIPS

  We took lots of video clips with our digital video camera Kodak Zi8, bought about a year ago.  Can I transfer on our computer & Watch clips from movies--the picture & sound is great.  But when I try to import into Movie Maker - so I can learn how to make movies, it won't import them.  I understand that Kodak clips are .mov & I read that Windows does not recognize the .mov - so what do we now?  I understand, there are a few 'conversion' online programs, but don't know what to use or which will solve this terrible problem.  We want to be able to enjoy our videos... Please help...

  Fix... QuickTime .mov files are not compatible
  with Movie Maker. Conversion to. WMV would be
  the best bet...

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Could not import the MP3 formatted to movie maker music

  A lot of difficulties to import music that I downloaded on my film. I made sure it of in mp3 format so cannot understand why I am unable to do?

  Can anyone help? Is there an easier way to add music?

  Hi Azzagazza,

  ·         What exactly happens when you try to import the music file in Movie Maker?

  ·         You receive an error message?

  I suggest you to follow the steps in the article and check if it helps.

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

  You can also see the following articles for more information:

  Import video, photos and audio on Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  Importing files into Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  Hope this information is useful.

• Could not import the DataProvider

  If I open a new file in Flash (AS3) in Flash CS3 Professional and try to import the DataProvider (import fl.data.DataProvider;), I consistantly receive a compile error (1172: definition fl.data:DataProvider could not be found). Does anyone know what is the problem?

  Definitions of components AS3 source, by default, not are not in the
  classpath of your Florida they are available in the
  \Configuration\Component Source\ActionScript 3.0
  folder of your Flash CS3 installation directory, however the components
  themselves rely on versions precompiled classes in the so-called
  as the ComponentShim. These assets are in your library, when you add
  a component in your library or the screen to the Panel components. His
  Located within the component assets > _private folder. Without this asset
  in your library, you will not have access to the component classes. What if
  you want to refer to a component dynamically, it will have to be added to
  your library before you publish your SWF file. The ComponentShim contains only
  the kernel LIKE classes, not the real components that rely also on the other
  graphics and movie clips that should be in your library before a
  components can be used in your SWF file

  "PalacaJoe" wrote in message
  News:f2a9m7$LKM$1@forums. Macromedia.com...
  > If I open a new file in Flash (AS3) in Flash CS3 Professional and try to
  > Import
  > DataProvider (import fl.data.DataProvider;), I invariably receive a
  > compiler
  > error (1172: definition fl.data:DataProvider could not be found). Does
  > someone at - it
  > know what's the problem?
  >

• Could not import the 5S for macbook pro

  Since the last update of my 5s, two days ago I can no longer import pictures for macbook pro.

  "Pictures in the film"the ___ iphone cannot be imported because the device is locked with a password"but it is not."  Can and would someone please help. "Thanks I also:" iTunes could not connect to the iphone '-iPhone "because an invalid response was received from the device.

  On the phone, try pressing these buttons at the same time for at least ten seconds, until the Apple logo appear: the sleep/wake button and the Home button. On Mac, it just reboot and then try again.

• Could not open the file of movie maker .wlmp

  Here is the file I was working on yesterday.  Today, I can not open the file

  https://SkyDrive.live.com/redir?RESID=7AAFC41E78349F19! 274 & authkey =! ABJdsJp5F7Zex-w&ithint=file%2c.wlmp

  Thank you
  Jeremy

  Follow the steps below:

  http://Windows.Microsoft.com/en-za/Windows-Live/Movie-Maker-fix-project-file

  The last step is the most important; apply for a private of support at the following link:

  http://Windows.Microsoft.com/en-za/Windows-Live/Movie-Maker-support

  Click on the link that says:

  Error 80004003: Sorry Movie Maker cannot open this project file.

• Could not import the .fla files

  Good evening friends,

  I can't import the files flash adobe flash professional cs6. The message I get is:

  "One or more files could not be imported because the problem occurred during the import"

  I need quick help.

  Thank you in advance.

  Ersin

  Fortunately, that said asymmetric is not correct, as well not be what you were asking about.

  You can open any FLA of CS5.5 or later, in any version, CS5.5, or later. At this time they did the files be future-proof. New feature does not work and could lead to problems, but the file should open ok.

  But back to what you asked, you would never import a FLA, then don't means you that you try to import a SWF file? They are sovereign, there's a number of Flash Pro version where the ability to import SWF has been removed. Not sure if including CS6. Nowadays you can import SWF files, but you wouldn't get the ActionScript code.

  If the SWF file is set to be protected, then that would also lead to errors. You are much better if you can find the original Florida

• Could not import the XT10 (RAF) RAW files in Lightroom 5.7.1

  To the right,.

  
  I recently purchased Fuji XT10 camera (released in may 2015), after the shooting in RAW for a reason that the RAF files could not be imported to Lightroom 5. I updated my Lightroom 5 to the more up-to-date version 5.7.1. but still will not change a thing. I am reluctant to convert to DNG because Internet said RAF files retain better details/data to DNG.

  Someone will have a solution to this please, or if someone has the same problem?

  Thank you very much for your help!

  
  All the best,

  
  Josh

  Hello

  This camera (X-T-10, correct me if wrong) requires 6.1 Lightroom and Camera raw 9.1 devices supported by Camera Raw

  

  Please proceed to Lightroom 6 or DNG Converter allows you to convert your images to DNG

  Concerning

  ~ Assani