Could not load the device driver

Similar Questions

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• Could not load the VT - d in ESXi 4

  Hello world

  My problem is that VT - d fails to load even if I think it should work. I'm under ESXi 4 u1 on ASUS P7H55-M Pro motherboard with 8 GB of RAM and Intel i3 530 cpu.

  I activated the VT - d in the BIOS and tested it with the vt.iso from this link: http://communities.VMware.com/docs/doc-8978

  It shows that VT is enabled on all hearts.

  When I boot ESXi, it states that:

  VTD failure loading with status-1, - 1, 0xbad0001

  When I press ALT + F1, I have this error Message:

  Could not load the iommu driver.

  I don't understand, its permitted on all cores and tested with vt.iso. But ESXi does not always work as expected. Somehow the iommu driver does not load. Anyone have any ideas?

  Concerning

  Christoffer

  Take a look at 5570 Xeon and i3 530 comparison: http://ark.intel.com/Compare.aspx?ids=37111, 46472,.

  Looks like VT - d is not compatible with the i3.

  ---

  VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4

  http://blog.vadmin.ru

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• HP deskjet 6122 could not load the driver on the CD, he says is no longer supported

  Original title: printer HP Printer driver

  I have an old printer of HP deskjet 6122.  It works very well.

  However, when I plugged in a new desktop computer, I could not load the driver for the CD.  He said that it is more compatible.

  Later, I learned that the driver for HP 990 will work as a substitute.

  When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver.  It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.

  Where can I go to download the HP 990 regardless of HP driver?

  It's the HP 990c driver you want?

  If so have you tried selecting the update of Windows while in the Add Printer Wizard?

  It will take more than 5 minutes to get an updated list of printers and the 990c is.

  You can get them here too:

  Drivers HP for Windows update

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Could not load the profile user (XP OS) and lost files

  Hello

  I tried to connect to my help my profile on XP last night and message box came up saying that my profile cannot be loaded.  I am currently in the temporary profile that was created automatically by the system for this profile.  It seems that files on another profile missing now and I can't get back my original profile.  This profile has been my administrator profile that I created to replace the supplied profile admin system.

  I checked the event log and I see an error event ID: 7026 "could not load the driver system or next start: Lbd." recently, I used the 'delete' function to get rid of one or two programs but was able to connect after you remove these two programs, so I don't think that was my problem with profile.

  I've seen a few comments on the forums, but they are especially for non XP OS.  Is it possible to retrieve the profile and files.

  Please notify.

  Thank you for your time.

  Recovering from a corrupted or damaged user profile is a relatively simple operation.  Follow the instructions in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

  airplance mode: off

  WiFi: connected.
  Bluetooth: off
  Ultrabook ASUS, bought on 14 April 2013
  Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
  Unable to activate the device.
  Basic troubleshooting done:
  1. reboot the PC
  2. activate and deactivate the airplance mode
  3. put updated driver
  Impossible to activate bluetooth
  error message: windows could not activate the device.
  tried steps 1-3 again me. same message showed.
  no other device is connected via USB when trying to enable bluetooth.
  known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

  Hello

  Thank you for the update.

  As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Feel free to contact us for any other questions related to Windows.

• Could not load the Norton power Eraser

  Installed Norton Security. Everything works well except a pop up window that says error 5013,3.

  Following the instructions I downloaded Norton Power Eraser. When you are finished, the pop-up with the addon window said I need a newer version of Power Eraser and "click here".

  No mater how many times I try, could not load the new version.

  Don't know what I was doing wrong before, but when the pop-up window came this time it worked.

  I'm glad that it worked, but I wish I knew why.

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• Windows could not load the profile of the user

  When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.

  Please reply me with the solution that I use win xp sp2

  Hi citycc,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to connect to Windows?

  4. how many accounts do you have on the computer?

  See the Microsoft article below and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

• Could not load the dll target, the error code 126

  A "runner error" box keeps popping up saying "could not load the dll target, error 126" code.  This appears at all different times, even when I'm not using the computer.  I don't know why it gives me this error or how I can get rid of him for good.

  Hello Tracy,.

  Try to configure your system to boot into boot mode (Ref: http://support.microsoft.com/kb/310353) will help you identify the problem.

  I hope this helps.