Could not load the driver for Teredo Tunneling Pseudo-Interface

Similar Questions

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error code 39, could not load the driver for my cd/dvd device.

  I tried the advice of troubleshooting, uninstalling and reinstalling, but it does not fix it.  I think that the driver on my computer is corrupted.  I can't get the original driver from the CD provided with the computer... because the CD player does not work... so... can Ow I get the driver to try a new?  And exactly how to load this driver?

  Here are the specs of the drive: TSST corp DVD + RW TS-H653B

  Driver version: 5.1.2523.0

  Please help, trying to install a new printer and cannot do without my CD drive... ack!

  Thank you

  Hi RhonBB,

  You can follow this link & check if the problem persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not load the driver for scanner epson SX215.

  I bought a new Epson printer which has a scanner, the only thing that I'm unable to install is the scanner driver.  I am running windows vista 32 bit.  I tried to download the scanner from Epson and the drive site, but no luck.

  Hi Baily474,

  Thank you for visiting Microsoft Answers.

  (a) what exactly happens when you try to install the drivers scanner? Do you receive an error message?
  (b) do you remember to make changes on the computer prior to this problem?

  I suggest to perform the clean boot and try to install the drivers for the scanner software. It will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  Reference:

  Add or remove a scanner
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner

  The problems of scanning
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP deskjet 6122 could not load the driver on the CD, he says is no longer supported

  Original title: printer HP Printer driver

  I have an old printer of HP deskjet 6122.  It works very well.

  However, when I plugged in a new desktop computer, I could not load the driver for the CD.  He said that it is more compatible.

  Later, I learned that the driver for HP 990 will work as a substitute.

  When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver.  It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.

  Where can I go to download the HP 990 regardless of HP driver?

  It's the HP 990c driver you want?

  If so have you tried selecting the update of Windows while in the Add Printer Wizard?

  It will take more than 5 minutes to get an updated list of printers and the 990c is.

  You can get them here too:

  Drivers HP for Windows update

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• Windows could not load the installer for the display

  Whenever I try to open the NVIDIA settings, it gives me the error message "Windows has no load installer for display. I did what some post said and went to the Device Manager and tried to find the graphics card. To realize that I could not find them. Then I went down to the unknown tab and there was my NVIDIA GeForce video card, so when I try to update my drivers, it gives me this error even. Help! D:

  Do you have downloaded screensavers, etc...

  1) click on 'Start' > select 'Control panel' > double-click "Add Hardware".
  Select ' Yes, "I have already connected the hardware" > click "next".
  Find and click on your device and click "next".
  If a driver is necessary, it should have with your hard drive.
  You can select "Disk" and load the driver from there.
   
  If successful, go no further
   
  (2) when you install new video drivers
  Uninstall the old ones
  Restart in vga mode
  disable a / v
  Install new drivers
  Reset
   
  If successful, no further
   
  (3) search for "desk.cpl" in the cache c:\windows\system32\dll and copy it to system32.
  Retry installation
   

• Windows XP could not load the installer for battery on Satellite P20 S103

  I have the above problem, I already downloaded the driver for the power manager here I do not see a battery?
  I can't find it on the site of toschiba
  the battery number is PSP20E 000XHV-No.

  I hope somewone here can help me with a driver or something I really don't now where to look further.
  Thanks in advance
  Wouter wally man welcomes wouter from Holland and canada at this time

  PS the operating system is windows XP to meet just more information

  Hello

  What do you mean by "I don't see a battery? Usually, you should always to be able to see the State of the battery, if you disconnect your computer from the power supply.
  The powermanager manages just what powersaving profile is loaded when boasts a particular situation or condition (as full power or watch DVDs, etc...)
  Cut just AC power to your PC and you will see the battery symbol.
  Please clarify your question.

  Welcome them

• Optiarc DVD RW AD - 7563A ATA Device___Windows could not initialize the driver for this hardware device. (Code 37)

  Someone help me please! some time my cd/dvd drive no longer works and I just thought he was the player, until my father discovered recently that is the driver for CD/DVD... he had some ideas on how to solve the problem, but so far none of them have worked...

  First I tried to update it... but no update not found

  Then I tried to uninstall and then reinstall...

  then I tried to uninstall the driver then restarting my computer hoping that vista would detect the problem and repair automatically, it did reinstall the driver but it does not always work with the same problem...

  I even tried to download some programs that said they would fix it, but all these just told me that the pilot was already up to date...

  I need this problem as soon as POSSIBLE, so I could really use some help!

  Thank you = D

  Hi leziegl,

  Thank you for your message.

  What is your make and model of PC? What DVD player, you are the problem with (brand/model)?

  How your father come to the conclusion it is a driver for the disk drive?

  Did you check the physical connection of the drive to see if a cable can be are detached?

  You can test the DVD player by installing it in another computer to see if the device has failed? Reader Orpossiblyanother who is known to try in your computer?

  You may have corruption in your profile. Here is an article on how test that:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion Notebook 15-e078sa: could not load the Driver USB controller

  Hi, I'm unable to find the driver for my USB controller, can anyone help?

  Hello

  Install:

  https://downloadmirror.Intel.com/21129/Eng/Intel (R) _USB_3.0_eXtensible_Host_Controller_Driver.zip

• Could not load the log for listview

  I can not load calllog to list view.

  Here is the code

  signals:
      void calllogLoaded(const QList &data);
  

  QList callHistoryResults = callHistoryService.callHistory(defaultAccount.id(), defaultFilter, callHistoryParams);emit calllogLoaded(callHistoryResults);
  

  and QML

  calllogDM.insertList(data)
  

  «I got this error "QMetaProperty::read: unable to manage"QList"non-registered data type for the property «QDeclarativeBoundSignalParameters::data»»»

  Have spent days for this, I have not found the solution. Could you help me on this? How can I insert calllog to listview?

  Thank you!

  You need to do the conversion yourself. You should always get the actual data, the CallEntry ( https://developer.blackberry.com/native/reference/cascades/bb__pim__phone__callentry.html ). The model is unable to handle this for you anyway.

• Could not load the NIC for Windows NT 4.0

  Hi guys

  I was unable to load a NETWORK adapter in Windows NT 4.0 from a machine that I migrated to P2V using VMWare Import

  I did the following:

  • Tried to add map AMD PCNET Family on NT4 Server CD - it says that it cannot find oemsetup.inf file (I can't confirm that the CD is the same version that was used to load NT 10 years!)

  • Installed VMware tools (and reinstalled several times)

  • Load the vmware tools CD, then tried to insall driver manually, hoewver are no vmware on the "CD image" driver, just some msi files

  • Checked the directory program files for readers of vmware, I can find the video, mouse... drivers etc but NO NETWORK drivers

  • Downloaded the AMD PCNET Family V1.9 card and installed this driver, but NT says that it cannot find the adatper Protocol still does not load.

  I am now my piece.

  I hope someone can offer advice.

  What is the vmx list

  ethernet0.virtualDev = "vlance" or something else?

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Could not load the firmware for the WRT610N update

  My new WRT610N v1 is really causing me some grief.  I can connect to 802. 11A devices but nothing on b/g.  I would try to load the new firmware, but when I try to load WRT160N_1.02.2_US_code.bin the process gets to about 22% finished and then gives an error "FAILED to UPGRADE.

  Any suggestions?

  Your router is WRT610N and you try to Upgrde the firmware used for WRT160N file... Both routers are different... Download Firmware 7.27 MB... Also, make sure that your computer is connected to route it (ethernet) while improving the firmware...

  WARNING: Remove the USB storage device (if any); This preserves the data storage USB of corruption...

• Could not load the metafile for Flash 17.0.0.134

  Try to install the updated 17.0.0.134.  On win 8.1.1 64-bit.  Continues to stop at 33%, then tells me it cannot load the metafile.  So now, I have no FLASH on my Firefox, because I used the FLASH uninstall program before the update.

  Use Setup offline http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe