Could not locate the battery online - HP Pavilion 15-b116sa Sleekbook

Similar Questions

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• I can't uninstall the old Java version 6 update 29. I get a "error code 1606: could not locate the directory."

  I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java?  I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability.  I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory.  Help, please!

  original title: uninstall older versions of Java
  Hello
   
  Method 1:
  Check out the link and follow the steps.
   
  After uninstalling Java, how to remove its entry in the windows?
  http://www.Java.com/en/download/help/regkey_addremove.XML
   
  Method 2:
   
  See the article and follow the steps.
   
  Error message when you install a program: "Error 1606. Could not access the network location. "All the users\ directory '
  http://support.Microsoft.com/kb/315352
   
   
  Method 3:
  Check out the link and follow the steps.
  
  Download errors: 1305, 2755, 1606, etc..
  http://www.Java.com/en/download/help/error_installshield.XML
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• ASA-6-110003: routing could not locate the next hop

  Hello

  I have a problem with our ASA firewall. I have a firewall that's inside, outside and DMZ interface. I have VPN clients that connect correctly and can access the internal network. However, for profiles that I have configured to connect via VPN to the DMZ network fails with the following messages.

  ASA-6-110003: routing could not locate the next hop

  &

  ASA-6-302014: disassembly of the TCP connection... No contiguity valid

  I have connections in the DMZ, but aren't VPN via internal and external interfaces without problem.

  The routing table has a route to this network and I have a nat in place - I'm quite puzzled by the present.

  Thank you

  Ed

  Hello Ed,

  Well, Nat seems good but you can do the following for me please:

  network of the DMZ_subnet object

  10.1.213.0 subnet 255.255.255.0

  network of the VPN_Subnet object

  subnet 255.255.x.x x.x.x.x

  public static DMZ_subnet DMZ_subnet destination NAT source (dmz - 2 outside) public static VPN_Subnet VPN_Subnet

  Kind regards

  Julio

• Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

  Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

  Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

• Could not locate the trash on laptop

  I sent many fake pictures and files in the trash. I tried to recover a file deleted last night and could not find the Recycle Bin on my laptop. Usually, on my previous dell computers, it's a shortcut icon, not on this one! Can someone help me locate it? Thank you

  Right-click on the desktop
  Select Customize
  In the left pane, select the Change desktop icons
  Select Trash Microsoft Security MVP, 2004-2009

• Could not locate the system volume

  I have a very similar problem that has been published before; However, the posted solution worked.

  I can't find in the newspapers, what is actually wrong.  If anyone can help, I'd appreciate it.

  "Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.

  I use VMware vCenter Converter Standalone 4.0.1"

  Newspapers reported the following errors (which are equivalent):

  Impossible to reconfigure a source that doesn't have a system volume

  converter.fault.ReconfigurationNoSystemVolumeFault

  It seems that there are 2 physical disks in the system

  > Drive:
  . \PhysicalDrive0 a type of adapter: 1

  > Drive:
  . A type of adapter \PhysicalDrive1: 1

  Converter is to see the C:\ as long as the system volume, but there is no active flag set on it.  The second disc is recognized, but according to it's Converter:

  > is a dynamic volume. No significant partition information may be associated with him

  So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.

  If it's a mirror of the software, you can:

  -remove the mirror and conversion

  -Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter

  If it is a dual-boot configuration, then I do not think that it is supported.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Windows 10 could not locate the boot camp partition

  I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD.  With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions.  I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document.  The partition is then renamed to 'Drive Partition 0 5'.  When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one.  For more information, see the Setup logs files'.  The Windows Installer does not progress.  I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.

  Any advice on how to install Windows would be greatly appreciated.  Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10.  I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.

  Please, disconnect all external storage devices to your iMac and run the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and now try BC Assistant.

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• Could not locate the agent.exe ODS.

  In recent weeks, when my computer starts up, I get a message that says ODS agent.exe impossible to locate the component dnssd, dll not found - need to re - install. I don't remember to remove whatever it is and wonder if this is a serious problem and how can I fix it?  I use Windows XP Home Edition II.

  Thanks for your help.  Elizabeth

  E-mail address is removed from the privacy *.

  If you mean that you see a message like this:

  ODSAgent.exe - Unable to locate component
  This application has failed to start because c:\windows\system32\dnssd.dll was not found.  Reinstalling the application may fix this message.

  ODSAgent belong to some software from Apple that allows remote DVD and CD disc sharing, restoration of system software and a migration wireless with MacBook Air.

  If you have not deleted the file, he could have been quarantined (actually deleted) by your unspecified antivirus/antimalware software.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If you use this Apple software and features, you can see if the uninstall and reinstall the application by downloading it from the Apple page:

  http://support.Apple.com/kb/DL112

  You might be able to get by with only replace the missing c:\windows\system32\dnssd.dll file that you can download on my SkyDrive, but there could be other files that are missing too so a relocation may be required if you use this software.

  If you do not use this software, you can uninstall it or disable the ODSAgent Service, so it does not start when you restart your system.

  Note that the 'experts' Support who are engaged by Microsoft engineer will say just to try running sfc/scannow and check if it helps (to help any) or run msconfig and disable the Service and that you will keep seeing the message, but that is not the problem - it fixes the symptom of a problem which is not the same thing that actually solve the problem (however counts as a 'response' on) their planet).
   
  Maybe it's fine if you use not just software, but you will leave with a sloppy XP configuration.

  If you do not know the software and do not use it, just uninstall it from Add/Remove Programs, and that should remove afflicted startup ODSAgent as well.

  To download the c:\windows\system32\dnssd.dll on my SkyDrive, follow these steps:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called dnssd when the name of the file should really be called c:\windows\system32\dnssd.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  Restart and look at things, to remember that you will have to perhaps download and reinstall this app from Apple, if other files are missing.

• Could not locate the installer of Windows on Vista Home Premium 32 bit.

  I tried for days to download an important update to Corel Paint Shop Pro Photo ultimate x 2.  I get the message that it cannot find Windows Installer - 86.  Or that the download has been blocked by the DEP system.  How can I get around these issues?  Also, Windows Installer 4.5 is available for my version of Vista and it's a download automatic or optional?

  Hello Vicki vs,

  Thank you for using the Microsoft Windows Vista Forums.

  Have you scanned your computer for malware?  I added a few steps to perform.  Please let us know status.  Thank you!

  Please follow these links to scan your computer.

  1. run it Microsoft Windows malicious software removal tool

  
  2 this online scanner (in safe mode with network, if possible):
  http://OneCare.live.com/site/en-us/Center/howsafe.htm

  When running Windows Vista in Normal Mode or Mode without failure:

  1. open a CMD window as an administrator (click Start, all programs, accessories, right-click on command prompt and choose Run as administrator)

  2. run this command: sfc / scannow

  3. look for the results returned by the SFC

  Watch carefully the present SFC results in the command prompt window.  The three possibilities and their conclusions are

  ·          SFC found no problems: This means that versions of the correct system files are used by Windows Vista, SFC.exe can determine. If you're still having problems in Windows, it could be questions of registry (SFC checks the files, not the registry), software installed on Windows or equipment.

  ·          SFC and fixed problems: This means that the SFC may have solved your problem. Try to reproduce the problem again. If the problem persists, it may be that there is unrelated to system file issues. But the presence of these questions could indicate that corruption

  ·          Found but SFC could not solve problems: This means that there are more important issues with the Windows system files. It could be that you have corruption in the SFC store uses for recovery.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Could not locate the next hop for ICMP outside:10.60.30.111/1 to inside:10.89.30.41/0 routing

  ASA 5505 Split tunneling stopped working when upgraded to 8.3 (1) 8.4 (3).

  A user has to connect to the old device of 8.3 (1) that they could access all of our subnets: 10.1.0.0/16, 10.33.0.0/16, 10.89.0.0/16, 10.60.0.0/16

  but now, they can't and in the newspapers, I see just

  6 October 31, 2012 08:17:59 110003 10.60.30.111 1 10.89.30.41 0 routing cannot locate the next hop for ICMP to outside:10.60.30.111/1 to inside:10.89.30.41/0

  any tips? I almost tried everything. the running configuration is:

  : Saved

  :

  ASA Version 8.4 (3)

  !

  host name asa

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.60.70.1 255.255.0.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 80.90.98.217 255.255.255.248

  !

  passive FTP mode

  clock timezone GMT 0

  DNS lookup field inside

  DNS domain-lookup outside

  permit same-security-traffic intra-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the NETWORK_OBJ_10.33.0.0_16 object

  10.33.0.0 subnet 255.255.0.0

  network of the NETWORK_OBJ_10.60.0.0_16 object

  10.60.0.0 subnet 255.255.0.0

  network of the NETWORK_OBJ_10.89.0.0_16 object

  10.89.0.0 subnet 255.255.0.0

  network of the NETWORK_OBJ_10.1.0.0_16 object

  10.1.0.0 subnet 255.255.0.0

  network tetPC object

  Home 10.60.10.1

  test description

  network of the NETWORK_OBJ_10.60.30.0_24 object

  10.60.30.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_10.60.30.64_26 object

  255.255.255.192 subnet 10.60.30.64

  the SSH server object network

  Home 10.60.20.6

  network of the SSH_public object

  network ftp_public object

  Home 80.90.98.218

  rdp network object

  Home 10.60.10.4

  ftp_server network object

  Home 10.60.20.2

  network ssh_public object

  Home 80.90.98.218

  Service FTP object

  tcp destination eq 12 service

  network of the NETWORK_OBJ_10.60.20.3 object

  Home 10.60.20.3

  network of the NETWORK_OBJ_10.60.40.192_26 object

  255.255.255.192 subnet 10.60.40.192

  network of the NETWORK_OBJ_10.60.10.10 object

  Home 10.60.10.10

  network of the NETWORK_OBJ_10.60.20.2 object

  Home 10.60.20.2

  network of the NETWORK_OBJ_10.60.20.21 object

  Home 10.60.20.21

  network of the NETWORK_OBJ_10.60.20.4 object

  Home 10.60.20.4

  network of the NETWORK_OBJ_10.60.20.5 object

  Home 10.60.20.5

  network of the NETWORK_OBJ_10.60.20.6 object

  Home 10.60.20.6

  network of the NETWORK_OBJ_10.60.20.7 object

  Home 10.60.20.7

  network of the NETWORK_OBJ_10.60.20.29 object

  Home 10.60.20.29

  service port_tomcat object

  Beach service tcp 8080 8082 source

  network of the TBSF object

  172.16.252.0 subnet 255.255.255.0

  the e-mail server object network

  Home 10.33.10.2

  Mail server description

  service object HTTPS

  tcp source eq https service

  test network object

  network access_web_mail object

  Home 10.60.50.251

  network downtown_Interface_host object

  Home 10.60.50.1

  Downtown host Interface description

  service of the Oracle_port object

  tcp source eq sqlnet service

  network of the NETWORK_OBJ_10.60.50.248_29 object

  subnet 10.60.50.248 255.255.255.248

  network of the NETWORK_OBJ_10.60.50.1 object

  Home 10.60.50.1

  network of the NETWORK_OBJ_10.60.50.0_28 object

  subnet 10.60.50.0 255.255.255.240

  brisel network object

  10.191.191.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_10.191.191.0_24 object

  10.191.191.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_10.60.60.0_24 object

  10.60.60.0 subnet 255.255.255.0

  object-group service TCS_Service_Group

  Description this group of Services offered is for the CLD's Clients

  port_tomcat service-object

  HTTPS_ACCESS tcp service object-group

  EQ object of the https port

  the DM_INLINE_NETWORK_1 object-group network

  object-network 10.1.0.0 255.255.0.0

  network-object 10.33.0.0 255.255.0.0

  network-object 10.60.0.0 255.255.0.0

  network-object 10.89.0.0 255.255.0.0

  allow outside_1_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.33.0.0 255.255.0.0

  allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0

  outside_3_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 allow 10.1.0.0 255.255.0.0

  OUTSIDE_IN list extended access permit icmp any one time exceed

  OUTSIDE_IN list extended access allow all unreachable icmp

  OUTSIDE_IN list extended access permit icmp any any echo response

  OUTSIDE_IN list extended access permit icmp any any source-quench

  OUTSIDE_IN list extended access permitted tcp 194.2.20.0 255.255.255.0 host 80.90.98.220 eq smtp

  OUTSIDE_IN list extended access permit tcp host 194.25.12.0 host 80.90.98.220 eq smtp

  OUTSIDE_IN list extended access allow icmp 80.90.98.222 host 80.90.98.217

  OUTSIDE_IN list extended access permit tcp host 162.162.4.1 host 80.90.98.220 eq smtp

  OUTSIDE_IN list extended access permit tcp host 98.85.125.2 host 80.90.98.221 eq ssh

  Standard access list OAKDCAcl allow 10.60.0.0 255.255.0.0

  Standard access list OAKDCAcl allow 10.33.0.0 255.255.0.0

  access-list OAKDCAcl note backoffice

  Standard access list OAKDCAcl allow 10.89.0.0 255.255.0.0

  access-list OAKDCAcl note maint

  OAKDCAcl list standard access allowed 10.1.0.0 255.255.0.0

  access-list allowed standard osgd host 10.60.20.4

  access-list allowed standard osgd host 10.60.20.5

  access-list allowed standard osgd host 10.60.20.7

  standard access list testOAK_splitTunnelAcl allow 10.60.0.0 255.255.0.0

  list access allowed extended snmp udp any eq snmptrap everything

  list of access allowed extended snmp udp any any eq snmp

  downtown_splitTunnelAcl list standard access allowed host 10.60.20.29

  webMailACL list standard access allowed host 10.33.10.2

  access-list standard HBSC allowed host 10.60.30.107

  access-list standard HBSC deny 10.33.0.0 255.255.0.0

  access-list standard HBSC deny 10.89.0.0 255.255.0.0

  allow outside_4_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.191.191.0 255.255.255.0

  OAK-remote_splitTunnelAcl-list of allowed access standard 10.1.0.0 255.255.0.0

  OAK-remote_splitTunnelAcl-list of allowed access standard 10.33.0.0 255.255.0.0

  OAK-remote_splitTunnelAcl-list of allowed access standard 10.60.0.0 255.255.0.0

  OAK-remote_splitTunnelAcl-list of allowed access standard 10.89.0.0 255.255.0.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  mask 10.60.30.110 - 10.60.30.150 255.255.0.0 IP local pool OAKPRD_pool

  IP local pool mail_sddress_pool 10.60.50.251 - 10.60.50.255 mask 255.255.0.0

  test 10.60.50.1 mask 255.255.255.255 IP local pool

  IP local pool ipad 10.60.30.90 - 10.60.30.99 mask 255.255.0.0

  mask 10.60.40.200 - 10.60.40.250 255.255.255.0 IP local pool TCS_pool

  local pool OSGD_POOL 10.60.50.2 - 10.60.50.10 255.255.0.0 IP mask

  mask 10.60.60.0 - 10.60.60.255 255.255.0.0 IP local pool OAK_pool

  IP verify reverse path inside interface

  IP verify reverse path to the outside interface

  IP audit alarm action name ThreatDetection attack

  verification of IP within the ThreatDetection interface

  interface IP outside the ThreatDetection check

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow any inside

  ICMP allow any echo inside

  ICMP allow any echo outdoors

  enable ASDM history

  ARP timeout 14400

  NAT (inside, outside) static static source NETWORK_OBJ_10.33.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.33.0.0_16

  NAT (inside, outside) static static source NETWORK_OBJ_10.89.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.89.0.0_16

  NAT (inside, outside) static static source NETWORK_OBJ_10.1.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.1.0.0_16

  NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.0_24 of NETWORK_OBJ_10.60.30.0_24 static destination

  NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.64_26 of NETWORK_OBJ_10.60.30.64_26 static destination

  NAT (inside, outside) static static source NETWORK_OBJ_10.60.40.192_26 destination NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.40.192_26 any port_tomcat service

  NAT (inside, outside) static source any destination of all public static NETWORK_OBJ_10.60.50.1 NETWORK_OBJ_10.60.50.1

  NAT (inside, outside) static static source NETWORK_OBJ_10.60.50.248_29 destination MailServer MailServer NETWORK_OBJ_10.60.50.248_29

  NAT (inside, outside) static source all all NETWORK_OBJ_10.60.50.0_28 of NETWORK_OBJ_10.60.50.0_28 static destination

  NAT (inside, outside) static static source NETWORK_OBJ_10.191.191.0_24 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.191.191.0_24

  NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.60.60.0_24 NETWORK_OBJ_10.60.60.0_24 non-proxy-arp-search of route static destination

  !

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  Route outside 0.0.0.0 0.0.0.0 80.90.98.222 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http 10.60.10.10 255.255.255.255 inside

  http 10.33.30.33 255.255.255.255 inside

  http 10.60.30.33 255.255.255.255 inside

  SNMP-server host within the 10.33.30.108 community * version 2 c

  SNMP-server host within the 10.89.70.30 community *.

  No snmp server location

  No snmp Server contact

  Community SNMP-server

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1

  transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set lux_trans_set ikev1 aes - esp esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto outside_map 1 match address outside_1_cryptomap

  peer set card crypto outside_map 1 84.51.31.173

  card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1

  card crypto outside_map 2 match address outside_2_cryptomap

  peer set card crypto outside_map 2 98.85.125.2

  card crypto outside_map 2 set transform-set ESP-3DES-SHA ikev1

  card crypto outside_map 3 match address outside_3_cryptomap

  peer set card crypto outside_map 3 220.79.236.146

  card crypto outside_map 3 set transform-set ESP-3DES-SHA ikev1

  card crypto 4 correspondence address outside_4_cryptomap outside_map

  card crypto outside_map 4 set pfs

  peer set card crypto outside_map 4 159.146.232.122

  card crypto 4 ikev1 transform-set lux_trans_set set outside_map

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ikev1 allow outside

  IKEv1 crypto policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  preshared authentication

  aes-256 encryption

  sha hash

  Group 5

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 2

  lifetime 28800

  IKEv1 crypto policy 50

  preshared authentication

  aes encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 70

  preshared authentication

  aes encryption

  sha hash

  Group 5

  life 86400

  Telnet 10.60.10.10 255.255.255.255 inside

  Telnet 10.60.10.1 255.255.255.255 inside

  Telnet 10.60.10.5 255.255.255.255 inside

  Telnet 10.60.30.33 255.255.255.255 inside

  Telnet 10.33.30.33 255.255.255.255 inside

  Telnet timeout 30

  SSH 10.60.10.5 255.255.255.255 inside

  SSH 10.60.10.10 255.255.255.255 inside

  SSH 10.60.10.3 255.255.255.255 inside

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  dhcpd dns 155.2.10.20 155.2.10.50 interface inside

  dhcpd auto_config outside interface inside

  !

  a basic threat threat detection

  length 3600 scanning-threat shun threat detection

  threat detection statistics

  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

  TFTP server inside 10.60.10.10 configs/config1

  WebVPN

  internal testTG group policy

  attributes of the strategy of group testTG

  value of 155.2.10.20 DNS server 155.2.10.50

  Ikev1 VPN-tunnel-Protocol

  internal DefaultRAGroup_1 group strategy

  attributes of Group Policy DefaultRAGroup_1

  value of 155.2.10.20 DNS server 155.2.10.50

  Protocol-tunnel-VPN l2tp ipsec

  internal TcsTG group strategy

  attributes of Group Policy TcsTG

  VPN-idle-timeout 20

  VPN-session-timeout 120

  Ikev1 VPN-tunnel-Protocol

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list testOAK_splitTunnelAcl

  the address value TCS_pool pools

  internal downtown_interfaceTG group policy

  attributes of the strategy of group downtown_interfaceTG

  value of 155.2.10.20 DNS server 155.2.10.50

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list downtown_splitTunnelAcl

  internal HBSCTG group policy

  HBSCTG group policy attributes

  value of 155.2.10.20 DNS server 155.2.10.50

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value HBSC

  internal OSGD group policy

  OSGD group policy attributes

  value of 155.2.10.20 DNS server 155.2.10.50

  VPN-session-timeout no

  Ikev1 VPN-tunnel-Protocol

  group-lock value OSGD

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list testOAK_splitTunnelAcl

  internal OAKDC group policy

  OAKDC group policy attributes

  Ikev1 VPN-tunnel-Protocol

  value of group-lock OAKDC

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list OAKDCAcl

  Disable dhcp Intercept 255.255.0.0

  the address value OAKPRD_pool pools

  internal mailTG group policy

  attributes of the strategy of group mailTG

  value of 155.2.10.20 DNS server 155.2.10.50

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list webMailACL

  internal OAK-distance group strategy

  attributes of OAK Group Policy / remote

  value of 155.2.10.20 DNS server 155.2.10.50

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value OAK-remote_splitTunnelAcl

  VPN-group-policy OAKDC

  type of nas-prompt service

  attributes global-tunnel-group DefaultRAGroup

  address pool OAKPRD_pool

  ipad address pool

  Group Policy - by default-DefaultRAGroup_1

  IPSec-attributes tunnel-group DefaultRAGroup

  IKEv1 pre-shared-key *.

  tunnel-group 84.51.31.173 type ipsec-l2l

  IPSec-attributes tunnel-group 84.51.31.173

  IKEv1 pre-shared-key *.

  tunnel-group 98.85.125.2 type ipsec-l2l

  IPSec-attributes tunnel-group 98.85.125.2

  IKEv1 pre-shared-key *.

  tunnel-group 220.79.236.146 type ipsec-l2l

  IPSec-attributes tunnel-group 220.79.236.146

  IKEv1 pre-shared-key *.

  type tunnel-group OAKDC remote access

  attributes global-tunnel-group OAKDC

  address pool OAKPRD_pool

  Group Policy - by default-OAKDC

  IPSec-attributes tunnel-group OAKDC

  IKEv1 pre-shared-key *.

  type tunnel-group TcsTG remote access

  attributes global-tunnel-group TcsTG

  address pool TCS_pool

  Group Policy - by default-TcsTG

  IPSec-attributes tunnel-group TcsTG

  IKEv1 pre-shared-key *.

  type tunnel-group downtown_interfaceTG remote access

  tunnel-group downtown_interfaceTG General-attributes

  test of the address pool

  Group Policy - by default-downtown_interfaceTG

  downtown_interfaceTG group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group TunnelGroup1 remote access

  type tunnel-group mailTG remote access

  tunnel-group mailTG General-attributes

  address mail_sddress_pool pool

  Group Policy - by default-mailTG

  mailTG group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group testTG remote access

  tunnel-group testTG General-attributes

  address mail_sddress_pool pool

  Group Policy - by default-testTG

  testTG group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group OSGD remote access

  tunnel-group OSGD General-attributes

  address OSGD_POOL pool

  strategy-group-by default OSGD

  tunnel-group OSGD ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group HBSCTG remote access

  attributes global-tunnel-group HBSCTG

  address OSGD_POOL pool

  Group Policy - by default-HBSCTG

  IPSec-attributes tunnel-group HBSCTG

  IKEv1 pre-shared-key *.

  tunnel-group 159.146.232.122 type ipsec-l2l

  IPSec-attributes tunnel-group 159.146.232.122

  IKEv1 pre-shared-key *.

  tunnel-group OAK type remote access / remote

  attributes global-tunnel-group OAK / remote

  address pool OAK_pool

  Group Policy - by default-OAK-remote control

  IPSec-attributes tunnel-group OAK / remote

  IKEv1 pre-shared-key *.

  !

  !

  !

  Policy-map global_policy

  !

  context of prompt hostname

  no remote anonymous reporting call

  HPM topN enable

  : end

  enable ASDM history

  Hi David,

  I see that you have:

  allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0

  So, please make the following changes:

  network object obj - 10.60.30.0

  10.60.30.0 subnet 255.255.255.0

  !

  Route outside 10.60.30.0 255.255.255.0 80.90.98.222

  Route outside 10.89.0.0 255.255.0.0 80.90.98.222

  NAT (outside, outside) 1 source static obj - 10.60.30.0 obj - 10.60.30.0 static destination NETWORK_OBJ_10.89.0.0_16 NETWORK_OBJ_10.89.0.0_16 non-proxy-arp-search to itinerary

  HTH

  Portu.

  Please note all useful posts

  Post edited by: Javier Portuguez

• Could not locate the menus.xml - CS5 file

  While trying to open Dreamweaver CS5 on mac OSX 10.8.2, I keep running into this error message.

  "Dreamweaver fails to locate the menus.xml file and it cannot rebuild from a backup." You may need to reinstall Dreamweaver. »

  I would try to reinstall, but I am currently overseas for 3 months and don't have my serial number or the disc with me. Does anyone know of a solution? I tried searching on the web but could not come up with solutions.

  Thanks in advance.

  Eric

  Use this link: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  Read the instructions very carefully. It's not a pirate download site. This site offers downloads of the trial for 30 days of CS5 (since Adobe lists more links on their portal).

  Once you download the installation, be sure to use your serial key.

• Could not locate the wininet.dll component and needs to be reinstalled again

  Original title: my computer won't let me it says needs demand winnetexdll how can I reinstall it if I can't get on the computer

  It says unable to locate the component the wininet.dll file did not need to reinstall it again, but it will not open how doi reinstall

  Hi miriamtorres,
   

  Scanning of auditor of system (CFS) files on your computer and check if it helps fix the problem.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Additional reference on:

  File system (CFS) Checker

• COULD NOT LOCATE THE DEFINITION OF UNEMPLOYMENT INSURANCE FILE

  WHEN I TURN ON MY COMPUTER AND IT BOOTS UP TO WINDOWS VISTA A POP COMES UP SAYING UNABLE TO LOCATE THE U I DEFINITION OF THE FILE THEN YOU CAN PRESS OK AND IT GOES AWAY. HOW CAN I FIX IT

  Hello

  Please no type is all uppercase because it is difficult to read and regarded as yelling.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  If necessary:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Trial version of GuideGuide ~ could not validate the license online

  You try to run the trial version of app GuideGuide and CC said failure of installation/a failed to validate the license online. What does that mean? How should I do?

  Google tells me that is not software Adobe GuideGuide so I think you should ask the seller how to install