Could not open a file zip as Envoy by norton security

Similar Questions

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Could not open the file on the computers hard drive Windows

  Let's first if I'm in the wrong place, I'm sorry if I'm not at the speed that the rest of you try a point of view, I'm not an expert in computers, in any case, my problem is that Google will not launch task bar or in the browser. I ran chkdsk a couple of times and still nothing, but in my action center it says "Windows could not open a file on your hard drive of computers 3 times, last on 17/08/2014 16:58 go online to the troubleshooting steps" when I view the message details he said that the solution can not be downloaded. Most likely causes: the problem report for this solution has been deleted or changed on this computer and the East is no longer available any help would be greatly appreciated

  I just did a clean boot and it seemed to fix my problem with the launch of chrome, so if someone has the same problem and then perform a clean boot

• Signature keys: could not open the file of the LSB

  Hi all BB Dev´s!

  I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)

  Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:

  http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  In step 3, after the order of blackberry - sign, I get the following error:

  Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj

  Someone at - it a tip for me to get this running order? Or is there a any error a fact?

  Would be happy to comment :-)

  Thank you very much

  Best regards

  Lars.

  Have you copied the file .csj in the following directory:

  C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin

  ??

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• 25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  I had tried... .but not possible... someone has this problem soluton...

  Prom KrishnaNyaupane Hello,

  Please check the TechNet link below for a proposed solution.
  http://social.technet.Microsoft.com/forums/en-us/officesetupdeploy/thread/86787c69-5909-4885-843e-b8b977e5cc33

  Let us know if it helps.

  Marilyn

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  I run the lesson 2 TemperatureSensor project

  I can detect the BMP180

  PI@raspberrypi ~/javame81ea/bin $ sudo i2cdetect y 1

  0 1 2 3 4 5 6 7 8 9 a b c d e f

  00:          -- -- -- -- -- -- -- -- -- -- -- -- --

  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --

  40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  70: -- -- -- -- -- -- -- 77

  I can retrieve the info from I2CDeviceConfig

  
  

  Name of the controller: null

  Controller number: 1

  Address: 0 x 77

  Size: 7

  Clock frequency: 3400000

  My API permissions are

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  JDK. DIO.i2cbus.I2CPermission "*: *".

  But when I try

  myDevice = DeviceManager.open (config);

  I get

  [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  Any suggestions?

  Ah.

  You run usertest.sh as root?

  sudo./usertest.sh

  Needs me root access to the devices.

  Tom

• ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora ORA-15001

  ASM, database version: 11.2.0.3

  Get error in the two alert logfile of ASM in cluster with two nodes below.

  ============

  Errors in the /u02/diag/asm/+asm/+ASM1/trace/+ASM1_ora_86521.trc file:

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  ORA-15001: diskgroup 'M0347_DG1' does not exist or is not mounted

  Same thing is written to the trace file as well.

  There is that a single database that p0347 runs and diskgroup that m0347_dg1 has been for other databases M0347 which is interrupted both diskgroup m0347_dg1 was abandoned.

  But why is it looking for spfilem0347.ora, please let me know how to fix.

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  P0347 database has nothing to do with the question. right?

  Probally you have not deleted from database M0347 of OCR and CRS was trying to start the database.

  $ORACLE_HOME of database using

  $ srvctl config database-d M0347

  If it is saved in OCR you should remove it.

  This command will delete the database.

  $ srvctl remove the d M0347 database

  Make sure Diskgroup is registered.

  With the help of GI $ORACLE_HOME

  $ srvctl config diskgroup g M0347

  If registered in OCR you can remove it.

  $ srvctl remove diskgroup g M0347

• Power error: could not open the file exists

  This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
  I have rebuilt the partition and re-assigned the same drive letter.
  Then I restored the 'Virtual Machines' from my backup folder.
  Now when I run VMPlayer and start my virtual machine I get the following error:

  Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.

  The directory search I find the file with the name and the correct directory path.
  Some attributes (readonly, hidden, etc.) are on.
  I am logged in as administrator.

  Is there some other files/directories should I have also restored?
  Suggestions?

  "" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.

  André

• Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]

  When I do a load of level 0 of my office, I get this error?
  
  Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]
  
  Unexpected error of Essbase 1090004.
  
  Please notify

  When you do a load of data on the client, if the file is not a server file that essbase has copy on the server so that it can load. That's why shipments of server-based file are so much faster, especially for large files. I'm guessing that the ID has no authorization to this tmp directory. The message, it looks like a system Unix-based. Check with your Unix administrator on the permissions on this directory