Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

Similar Questions

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• MMC cannot open the file C:\Windows\system32\devmgmt.msc.

  I was upgrade from Vista 64 for Windows 7, early in the process, I lost the use of my cd player.  I'm unable to download the drivers.

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  How do I solve this problem

  "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.

• Signature keys: could not open the file of the LSB

  Hi all BB Dev´s!

  I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)

  Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:

  http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  In step 3, after the order of blackberry - sign, I get the following error:

  Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj

  Someone at - it a tip for me to get this running order? Or is there a any error a fact?

  Would be happy to comment :-)

  Thank you very much

  Best regards

  Lars.

  Have you copied the file .csj in the following directory:

  C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin

  ??

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));

• 25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  I had tried... .but not possible... someone has this problem soluton...

  Prom KrishnaNyaupane Hello,

  Please check the TechNet link below for a proposed solution.
  http://social.technet.Microsoft.com/forums/en-us/officesetupdeploy/thread/86787c69-5909-4885-843e-b8b977e5cc33

  Let us know if it helps.

  Marilyn

• [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  I run the lesson 2 TemperatureSensor project

  I can detect the BMP180

  PI@raspberrypi ~/javame81ea/bin $ sudo i2cdetect y 1

  0 1 2 3 4 5 6 7 8 9 a b c d e f

  00:          -- -- -- -- -- -- -- -- -- -- -- -- --

  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --

  40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  70: -- -- -- -- -- -- -- 77

  I can retrieve the info from I2CDeviceConfig

  
  

  Name of the controller: null

  Controller number: 1

  Address: 0 x 77

  Size: 7

  Clock frequency: 3400000

  My API permissions are

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  JDK. DIO.i2cbus.I2CPermission "*: *".

  But when I try

  myDevice = DeviceManager.open (config);

  I get

  [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  Any suggestions?

  Ah.

  You run usertest.sh as root?

  sudo./usertest.sh

  Needs me root access to the devices.

  Tom