Could not open the Photos after Snow Leopard update to El Capitan

Similar Questions

• Could not open the photos sent to my Hot mail account?

  Could not open the photos sent to my Hot mail account?

  Hi Dean,

   

  Hi Dean,

  1. what happens when you try to open the attachments?

  2 are you facing this problem with any particular email?

  3 are you facing this problem all other sites?

  4. what anti-virus software is installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Check if the security level is set to medium in Internet Explorer 9.

  Change Internet Explorer security settings

  Method 2: Optimize your internet Explorer and check to see if it helps.

  How to optimize Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: This link applies to Internet Explorer 9.

  If you encounter this problem only with Windows Live Hotmail, please visit the link below to find a community that will provide the best support.

  http://windowslivehelp.com/product.aspx?ProductID=1

• Could not open the Photos on my Mac with Photoshop elements 13 with OS Yosemite.

  Is could someone please tell me why I can not open the Photos in Photoshop elements 13 on my Mac. When I try, a box comes up saying that the 13 elements Photoshop has quit.

  I have OS Yosemite 13 version 10.10.3 (updated Lion a few weeks ago) and that you have upgraded to the latest software for Yosemite today.

  Thank you very much

  If you have upgraded the operating system after installing Photoshop element 13.

  Please reinstall Photoshop element 13 and see how it works.

  Download link: Download Photoshop Elements | 14, 13, 12, 11, 10

  It will be useful,

  Kind regards

  ~ Mohit

• Could not open the photos

  I just tried to open the application 'Photos' (or icon) on my Mac and received a message that says "Photos could not find the system 'photos library.photoslibrary' how can I do to recover it?  I have about 10,000 photos which are lost!   I run a separate hard disk as a time machine which is connected permanently, but I've never had to use it before.  Any help would be appreciated.   Mike George

  What happened, until you got this error message?  Did you update or upgrade software?  Move your photo library to another drive?  You run applications of cleaning?

  By default, your photo library should be called Photos Library.photoslibrary and be in your pictures in your folder folder, unless you have moved elsewhere.  Check your pictures folder, if the library is still there.

  If you have kept the library on an external drive, make sure that the disc is mounted and connected locally, not a network drive.  Photos cannot open a library on a hard disk that is used by time Machine.

  What version of Mac OS X and Photos do you currently use?

• Could not open the photos restored from a backup

  I can't open the photos restored from an external hard drive.  Error message says I don't have permission to do so.  I have check everything that I can think of and I am also the administrator of the computer.  Can anyone help?  I spent at least eight hours trying to solve this problem.

  Have you thought to take possession of the files?

  Check the permissions of the file or the folder that the file is saved in. Here's how:

  Right-click on the file or folder and then click Properties.

  Click the Security tab.

  Under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information on permissions, see permissions are?

  Ref: http://windows.microsoft.com/en-AU/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  or: http://technet.microsoft.com/en-us/library/cc753659.aspx

  or: http://support.microsoft.com/kb/308421

  Please indicate in the future this operating system of Windows that you are using etc.

  And to post on this forum, please visit: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Thank you.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Could not open the photos on my external hard drive

  When my outside of the opening drive the photos it will not open. Here is what I get. The version of this file is not compatible with the Version of windows your race (have windows xp and now with the new computer is Windows 7) it says then check information computer system. to see if you need and 86(32bit) x or x 64(64 bit) version of the program. Don't know what to do at this point.

  Files on the outside are visible in the Explorer? If so, how the properties of these files show?

• Could not open the photos attached to e-mails in Outlook Express

  I can't open a picture attachment in Outlook Express. The message is: "this file does not have a program associated with it execute this action.» Create an association in the folders Option Control Panel ". I don't know what to do in the records of the control panel Option. Can someone help me please?

  I use Outlook Express 6. Internet Explorer 8. XP Professional.

  Recently I had to reinstall my hard drive. I could open pictures in messages before today.

  Thanks in advance...

  Stefanie Kott

  With XP, Windows images and faxes is the default viewer for photos. Create a file association.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Images of Windows and Fax Viewer.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.

• Could not open the film after completing

  Seems, I am not alone, but I don't see a convincing solution yet, so I write the question.  I finished the editing of a film and inserting the titration overall.  iMovie has crashed a few times, but the project was intact at the opening.  When you are finished, I clicked on "Finalize project" and left the computer alone for a few hours.  He said it would take three hours, but after about two saw that the status bar was no longer visible, and the app was always open to my movie, so I thought everything was fine and closed my MacBook Pro.  Now, back to search, I find the project file, but no evidence of my finished movie.  I see other projects of film that I can open and play, but only the first sequences of the film I just did.  It shows that the project is 5 + gigs, but I don't know if it simply means that all the raw images is 5G or if it's that big because all my titles is there somewhere (I hope).

  Never mind.  If you make the menu drop-down 'open with', you will see a selection of watch "content of the package."  There you will find your recorded several times, all renowned movie with generic codes relating to the size with extensions .mov and MP4 files.  Renamed completely.  Not useful.  No rational.

• Could not open the PC After Effects CS6 v. Mac created AE comp version 13 11.04.2?

  I can't open a Mac created v.13 model of EI using my PC AE CS6 v 11.  No work around?  It has been saved for PC use.

  OS is irrelevant. You need to be saved in version 11 of AE.

  This means that someone needs to open in 2014 CC (version 13) and choose Save as CC (version 12). Then someone needs to open in CC (version 12) and choose to save it as CS6 (version 11).

  See the second part of the present: open projects After Effects of previous versions and re-registration in previous versions

• Could not open the link after installation of 9.3

  After installing IOs 9.3 on my i Pad Air? (Model MGL12HC/A) I can't open a link in my browser (safari) or in my mail.

  How can I solve this?

  This is a common problem and there is currently no permanent solution.

  Try turning off JavaScript under settings - Safari - Advanced.

  Keep patience, I think soon Apple will figure things out.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Signature keys: could not open the file of the LSB

  Hi all BB Dev´s!

  I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)

  Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:

  http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  In step 3, after the order of blackberry - sign, I get the following error:

  Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj

  Someone at - it a tip for me to get this running order? Or is there a any error a fact?

  Would be happy to comment :-)

  Thank you very much

  Best regards

  Lars.

  Have you copied the file .csj in the following directory:

  C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin

  ??

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));

• ORA-28575: could not open the RPC connection to external procedure

  Hello

  I get the following error:

  ORA-28575: could not open the RPC connection to external procedure

  ORA-06512: at "SDE". ST_GEOMETRY_SHAPELIB_PKG', line 1325

  ORA-06512: at "SDE". ST_GEOM_UTIL', line823

  my environment:

  ORACLE 11 g 2 (11.2.0.3)

  IBM AIX 6.1

  ESRI software: ArcSDE 10.1 SP1

  Since I'm on oracle 11g release 2, I used the method of the external procedure:

  under $ORACLE_HOME/hs/admin

  in the "extproc.ora" file, I added the line

  SET EXTPROC_DLL = ANY

  and still the same problem.

  so I made the (listener and tnsnames configuration method) where that might solve the problem. However, it does not help...

  I also applied the oracle metalink 1256784.1 ID DOC

  but without success and I'm still getting this error (ORA-28575).

  After extensive troubleshooting, I discovered that this will happen in one of two situations:

  1. the external procedure library .so is corrupted.

  OR

  2. the external procedure library .so is a 32-bit... .to check that the Unix ( file lib.so), the exit command should give you 64-bit