Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

Similar Questions

• Could not open the template .indd file

  Hello

  I have a javascript code which I'm porting from CS3 to CS5.

  The code worked well on a Windows as CS3 Server.

  I've worn it will work perfectly on my local machine to Mac on CS5.

  As soon as I try to run it on a Mac CS5 server, I get questions.

  Here is the original code snippet.

  ("model = File("/myDirectory/sample_template.indd ");
  

  document = app.open (model, true);

  The file exists and template.exists is combing back as 'true '.

  Return errors logging is:

  Error: Invalid value for parameter "openOption' method 'open '. Enumerator for the OpenOptions awaited, but received TRUE, is not a valid value for the parameter "openOption' of the 'open' method. Enumerator OpenOptions expected, but TRUE receipt.

  I tried the following variations of code with the following results in red.

  document = app.open (template);
  Error: Invalid value for parameter "openOption' method 'open '. Enumerator for the OpenOptions awaited, but received TRUE, is not a valid value for the parameter "openOption' of the 'open' method. Enumerator OpenOptions expected, but TRUE receipt.

  document = app.open (model, OpenOptions.OPEN_ORIGINAL);
  Error: defaultValue is undefined, defaultValue is undefined
  
  document = app.open (model, OpenOptions.openOriginal);
  Error: defaultValue is undefined, defaultValue is undefined

  document = app.open (model, OpenOptions.openCopy);
  Error: defaultValue is undefined, defaultValue is undefined

  
  I use this as my CS5 (app.scriptPreferences.version = 7;)

  Any ideas why app.open () is a failure?

  Carlos

  App.open () arguments are different in InDesign server. See: http://jongware.mit.edu/idcs5serv_html_3.0.3d/idservcs5/pc_Application.html#open.

  Not surprisingly, the showingWindow option is omitted, because InDesign Server windows never shows.

• Could not open the handle (80) file ExceptionInfo

  I try to load Captivate using the creative Package Installer of cloud (https://www.adobe.com/go/ccp_installer_win). I have the license information, but the product is not install as I get the following error conditions.

  / 5/2016 11:55:22 [INFO] AdobePackageBuilder - verbosity Logging Level Set of 4

  05/04/2016 11:55:30 [WARN] AdobePackageBuilder - cannot open the file handle ExceptionInfo (80)

  05/04/2016 11:55:30 [WARN] AdobePackageBuilder - impossible to correctly create the exception information file

  Any help would be appreciated.

  Did you follow the steps in this document:

  Products non - Adobe Creative Cloud package

• "Lightroom could not prepare the edition of file@...for selected.  It will not open

  I am trying to edit the images that are on my last (filed a year ago) external hard drive using the external editor for elements/Nik Software processer.  I can do any editing in Lightroom without a problem and I can export these pictures in other locations such as a folder on the desktop or beat Cup... Treatment to enter items or Nik software is the only thing I can't do.  I don't have this problem when I deal with the pictures that are on my new external hard drive.

  Since I've done a wide change of this type with the images on the hard disk before it is not supposed that the permission is the issue.

  And yet people report permissions changes when an update of the operating system is installed and at other times too.

  I wonder if it has something to do with image editing on a number of external hard drives?

  It is a nonsense. Lightroom has no trouble to perform all actions on ares photos stored on external hard drives.

  I do not like to plead ignorance but don't know how to do this.

  Go to your favorite search engine and type in one of the following

  Change the permissions of Mac

  Change the Windows permissions

  Also, check that always there is free space on the hard disk that contains your photo

• ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/DB11G/STANDDB/control01.ctl'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Did you check the alerts log.. ?

  have you checked the control file is available in this mount point... ?

  When you have this error... ? I mean what you're trying to do... ?

• Could not open the virtual machine

  I used the customer convertor to create this virtual machine from one which works well on ESxi.  When I try to open on Win7-64 machines running vmplayer 3.1.4 I get the following error:

  Could not open the virtual machine: file "D:\Data\VM Machines\WW S2008_32\WW S2008_32.vmx 10_1 10_1" line 1: syntax error.

  Any ideas?

  "" "WW 10_1 S2008_32.vmx.zip" attached file contains the "WW 10_1 S2008_32.vmx" file created under VMware Player 3.1.4 and was then modified to reflect the values of parameter that you might want to stay the same as uuid etc.  Start VMware Player and then check the settings before running the virtual machine.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.

• Could not open the file sml nokia

  Could not open the file sml nokia

  Hello

  The operating system that you are running on your computer?

  You must identify a program to open the file. Associate the fily type with a program, and check if it helps.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Signature keys: could not open the file of the LSB

  Hi all BB Dev´s!

  I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)

  Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:

  http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  In step 3, after the order of blackberry - sign, I get the following error:

  Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj

  Someone at - it a tip for me to get this running order? Or is there a any error a fact?

  Would be happy to comment :-)

  Thank you very much

  Best regards

  Lars.

  Have you copied the file .csj in the following directory:

  C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin

  ??

• XmlDataModel could not open the file

  Hello

  I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').

  what I have is the following,

  generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel

  // modelfile is define in the h file like QFile *modelfile;
  
  modelfile = new QFile("data/model.xml");
  
  QXmlStreamWriter* xmlWriter = new QXmlStreamWriter();
  xmlWriter->setDevice(modelfile);
  
  // do the xml write stuff
  
  modelfile->flush();
  modelfile->close();
  
  XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
  

  THX,

  Xtravanta

  Found the solution:

  dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus