Could not restore Windows 7 after Windows 8 Preview - TM2 version have restore DVD, always fails.

Hello!  I'm about out of ideas on how to resolve this, so I'll do a summary of what I changed with the machine and then further troubleshooting details on.  The hp touchsmart PC portable individual I is a TM2-1079 cl, product number: WA812UA #ABA.  I got it for the length of 2012, I bought it used another person about 1 year ago now specifically to play with Windows 8, before his release.  Regarding materials real age, I can tell from the warranty information that it was made at the end of 2009, he stated the warranty period was from January 2010 to January 2011.

Okay, so my story with the OS change goes:
-> Bought this TM2 in early 2012, ran the recovery partition to wipe it clean from the previous use of owners and he went perfectly well, then a Windows 7 clean installation as if it were new.  I had also made use of an Acronis True Image 2010 boot disk to a hard disk image of the three than other recovery partitions (although I do not understand the freshly installed windows partition 7, thought it wouldn't matter if the recovery could do it's thing right?)
-> A few days later, I loaded the second of the three Preview versions for Windows 8 above (Customer Preview build I think).   Everything worked well and it doubles starting between the two without problem, as far as I know, the only real made amounted to convert the main partition that Windows 7 was installed on an extended partition and splitting of existing Windows 7 partition everything also 50-50 indoor and extended partition.  She had also replaced the Boot Manager / bootloader which was there before, but once again not surprised.
-> When the build of the Preview version was released over the summer I did an update from inside windows 8 and all seemed well again.  Change between builds two preview has developed a problem where I could not stop windows 8 without a handful of error boxes poping up to the top, but I'm pretty sure that was unrelated.
--> More recently about time thanksgiving, I decided to give the laptop to a family member with an archiac office who has had problems and updated factor of old general who in fact does not.   This person is quite unfavorable for change so that everything "Win8-vs-what people are used" comes into play.   I decided to erase the TM2 clean to the BONE it comes with.    Here's where I'm stuck now:

=> Before doing anything I did a just incase, glad I did another true picture of the HARD drive.
=> I have tried F11 to load the recovery partition to see that, because of the bootloader be tampered with by Windows 8 it is really not to the HP recovery partition more while it is still on the hard drive.
=> Captures the image of hard drive since the beginning of the year with the partition recovery on it until windows 8 hit the machine, cleaned the hard drive completely, restored the disk image.   I could now enter HP recovery fine but...
=> I got a dialogue mistake right off the bat, saying that the recovery partition could not install and insert me CD 1 of recovery of education software.  Well I never did the dvd myself with the single use burning star when it worked so that is out and I did not buy the disks on the HP support site.   At this point I'm stumped, but why the recovery partition cannot install despite the computer load up in recovering very well.  For example, command prompt in the Windows PE environment is functional and all files seem to be present.   Maybe some checks as the recovery partition is not pirated could have been triggered by hard drive imaging, I'm really not sure?
=> I did then used the image of HARD drive, I had just created before trying it and restored the other copy of the reader (bootloader altered Win8, Win8 version preview, win7, the inaccessible and all recovery partition).   Windows 7 and 8 - RP can still start.   Google a bit on the recovery partition key (F11) is dirtied by Windows 8 and came to find that I had to only salvage value as the partition "Active" so he can start.  Sure, I have to start but I'm running into the same issue, where the real recovery partition loads but now refuses to start the process of restoring without HP dvd.  Because I know that for some it worked months ago I guess that once more, because I ended up restoring this version of the recovery partition it may also declared himself tampered with... great.
-Online planned what to do a little and then finally just ordered the DVD from HP in December, I had specifically recovery DVD for my model and they weren't from HP directly, not second hand on ebay or another person.  Wasn't really that bad, $16, very reasonable price.  Should be just, legit OEM DVD to use?  Nope...
=> Came the DVD.  Two main recovery disks and a third for applications and drivers.   Start with disk one and he says is formatting the drive how he wants (good, I love it so far), copy all the content of the three disks on the hard drive and starts his reboot and install cycle.    Restarts a handful of times, you can tell that well after the copy of the content of the any disk and installing windows.  You see the logo Windows 7 boot a few times and even the standard background 'prepare your things' which is similar to the Windows 7 login screen.  The screen becomes certainly as far as the driver proper (and others I guess at that time here) such as changes in native resolution for LCD of the TM2 towards the end.
-Online all of a sudden on the 3rd or 4th (I think) reboot of windows setup begins for a while then said stop, it restarts and it is back in Windows PE installation of recovery again (this time from the hard drive, not the DVD) and says that it has failed to restore and offers to start over from the beginning.

This is where I am stuck.  The recovery Partition died on me post-Windows 8 and the official HP recovery DVD fail to me (and curiously they you apparently miss you in all stages of restoration windows 7, well after the DVD themselves are are most read from).

> Question 1: is the "self-destruct" HP recovery partition if he gets imaged hard drive imaging software and restored?  I can confirm mine worked fine and then died after after crossing Acronis True Image.  Another possibility is that perhaps there is a certain ID or the tattoo of the hard disk or specific partitions that was lost when Windows 8 put his recent bootloader into the machine or lost of Acronis?  It's always the hdd oem supplied with the computer, it has not been turned out.
> Question 2: are there known issues with the official recovery of Windows 7 DVD s for an end TM2 2009 1079 cl?  I also know the recovery of Cyberlink software fix / preinstall disc and tried this with results that were not different in without it.  That said, my machine has the version of the recovery software Cyberlink, I read something as software from 3 different companies for recovery depending on the period of time the laptop was manufactured and sold.
Reference: [ http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=pv-80183-1 ]
> Question 3: clearly asked, what now?  Another thing to try or I have to go find a disc of windows 7 RTM and snatch all the zippers of all pilot?  (Quite hoping to avoid this, I'm actually curious enough to really understand what happened here and that will work he answered nothing.)  hehe).

Perhaps of things this way: some research led me to believe have the WLAN switch off at the beginning of the recovery causes the driver to flip out (and win7 seems indeed dropping dead during the last steps of the installation of the driver) however it is not possible it seems to activate the wireless card 'on' before that point.  Switch do even when active state.   As I have already mentioned the recovery of Cyberlink software patch has no effect on things.   No parts have never been amended in this machine, the original hard drive, the wireless network card, modules, ram ect.   I doubt that the motherboard bios / firmware has never been States machinery, update is revision F.02.

I have at my disposal:
Much time, in fact, hense why I really want to know what has happened and do not use the disc of Win7 RTM.
* disk hard recovery HP before addressed Win8 image machine.

* disk hard recovery image after Win8 and a little bug, but still bootable Win8-RP.
* The correct recovery DVD for my laptop HP-directed, ordered recently (December 2012).
* Enough confidence to play with score editing tools would it be a suggestion, never really used much outside of gparted on discs live linux however.  In view of the current state of the machine there is nothing to lose much more than to risk.

Sorry for the wall of text!  I love being very detailed!

I actually had, pretty much on a whim of 'eh, might as well try it' too!

So I told him earlier that it seemed obvious that most of the recovery completed well, something just kept arye until reset all cycles of the overall configuration process.   Seemed as if drivers were causing a problem because the display driver had obviously just finished installing a few moments before the final restart dead-end.  There was a lot of forum discussions there on different models of HP laptops, who need the wireless card to be placed in 'market' or restore might fail completely, I tried but the TM2 does not really allow you to change the WLAN State of 'off' when the operating system has already recognized (as in bios menus and windows install ", it stays just off even if you hit the switch).

I decided to try pulling the mini-pcie card out of the machine completely and from configuration on and... It worked!  I had throughout a fresh Windows 7 and he even recreated my recovery partition correctly!

Check in the C:\SwSetup\ directory after the installation was made, I found all the other drivers and a folder called 'WLAN', which was empty.   I guess that means if recovery is not material, then they choose even not copy the data to a certain device driver.   Because it was not present, everything that's wrong with installing drivers during recovery wireless cards never crashed the recovery all!

I wonder if there isn't something wrong with the wireless card in my TM2 in all honesty.  I had a problem with it along since I got a year ago in this radius of reception was terrible and if I went that areas of the room of the wifi point he was likely to win.   Having said that it worked then I ignored it before.   Maybe the card is gone belly up and install recovery is not just installation to recognize errors in nonlethal pilot since the WIFI network?  He would fit with other peoples problems when WLAN is turned off as well at least.

---

As a separate note, since the new year I've updated my personal machine (a HP DV6T) for one SSD and (without erasing my old HDD), I decided to try acronis imagery on this cover of machines and other partitions under Windows 7 itself for the SSD.   Of course, the same question appeared, recovery would not launch without the DVD.   Apparently Acronis True Image just cannot successfully restore HP to an image of partition recovery.   I don't pretend to know why but while the real partiton returns through restoration and environmental WinPE is running the effective recovery certainly does not aftering through an image .tib in the case of two separate HP machines.

---

(For googlers who think so), these are two of the three questions, which I came across while doing this resolved and everything that I'm going to worry.

> Windows 8 Preview mess with bootloaders, breaks recovery, I didn't figure out how to restore it.
> Do not rely on an image of hard disk from the recovery partition, even if you can restore the partition and it opens to black recovery menu window it can still fail and ask the recovery dvd.  The recovery partition disk imaging is risky!

> If your HP recovery (partition or dvd, or another) dies near the end of all this and turning on/off WLAN is not helping, try ripping off the mini-pcie for the restore time card and then reinsert once you return to an operating system clean, everything worked for me!  For reference, I don't know what model of wlan card that is exactly, but it's a Broadcom 802.11n adapter (HP alternative number? Not sure) SPS: 593837-001.  The driver will not be C:\SwSetup\ after the installation as the dvd won't copy out but plug in ethernet, windows update finds it easy.

Tags: Notebooks

Similar Questions

  • Could not restore Windows 7 for replacement drive

    HP Pavilion 6267c running Windows 7 64 bit would not start.  Diagnostic said failed to find the startup disk.  Replace 750 GB drive with Seagate Barracuda 1 TB drive.  A ran disk original restoration and after initial installation, but I have the following message:

    Windows Setup could not configure Windows to run on a hardware on this computer.

    Retries of installation with the same results.

    any help is appreciated.

    Hello

    Before you try the following, make sure that you can always read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

    Assuming that it's just a problem with the recovery process, it is a job before right around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE your PC came with Windows 7 Home Premium 64-bit, it comes to version exact commercial that you would need.

    If you don't have access to a retail disk, you can create an installation disk yourself using another PC - just download the good Disk Image from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA to demand and when the installation is complete use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load delivered normally with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    Additional drivers, you may need can be found here.

    Kind regards

    DP - K

  • Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

    OS = Windows 7

    Computer = Gateway FX6840
    Media = gateway recovery media
    Hard drive is set to AHCI in BIOS

    I started meeting with S.M.A.R.T. errors.

    I backed up my data.

    I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

    I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

    Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

    I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

    Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

    Thanks for the reply.

    Fortunately, I solved the problem myself (after 19 hours of stress).
    The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

    There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

    Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

    So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

    It worked.

    So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

    Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

    Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

    Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

    Eastan - ITF

  • "droplets could not communicate with photoshop" after the update of Windows 10 anniversary

    Received the error "droplets could not communicate with photoshop" after that I upgraded Windows version 1607. I tried different droplets, their new creation as an administrator, open Photoshop and/or gout as administrator, disable UAC and Windowsdefender (with restart), reinstall Photoshop and creative cloud together, userpreferences and all the plugins.

    PSerrorlog showed the following: of type struct _ADsc * __ptr64 are not found: 1: DEMAND is not

    Only found a solution to reset the settings, who removed the error in the log, but it seems that he had nothing to do with my problem of droplets.

    He has no idea of what I could do, left, with the exception of the decommissioning of windows, I would not call a solution. Please help me.

    Systeminformations:

    Adobe Photoshop Version: 2015.5.1 20160722.r.156 2016/07 / 22:23:00:00 CL 1083377 x 64

    Operating system: Windows 64-bit 10

    Version: 10 or higher

    System architecture: Intel CPU Family: 6, Stepping: 8 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, model FP: 7

    Physical processor count: 4

    Processor speed: 2167 MHz

    Built-in memory: 3979 MB

    Free memory: 1382 MB

    Memory available to Photoshop: 3161 MB

    Memory used by Photoshop: 70%

    Layers of alias: ^ 0

    Range of modifier: enabled.

    Space design: enabled.

    Multi-frequency 3D printing: disabled.

    HighBeam: enabled.

    Tile image size: 1024K

    Image cache level: 4

    Overview of fonts: medium

    TextComposer: Latin

    Display: 1

    Limits of the display: top = 0, left = 0, low = 768, right = 1366

    OpenGL drawing: enabled.

    OpenGL allows old GPU: not detected.

    OpenGL drawing mode: Advanced

    OpenGL allows Normal Mode: true.

    OpenGL allows Advanced Mode: true.

    AIFCoreInitialized = 1

    AIFOGLInitialized = 1

    OGLContextCreated = 1

    NumGLGPUs = 1

    NumCLGPUs = 1

    glgpu [0]. GLVersion = "4.0".

    glgpu [0]. IsIntegratedGLGPU = 1

    glgpu [0]. GLMemoryMB = 2053

    glgpu [0]. GLName = "Intel(r) HD Graphics"

    glgpu [0]. GLVendor = "Intel."

    glgpu [0]. GLVendorID = 32902

    glgpu [0]. GLDriverVersion = "10.18.10.4276".

    glgpu [0]. GLRectTextureSize = 16384

    glgpu [0]. GLRenderer = "Intel(r) HD Graphics"

    glgpu [0]. GLRendererID = 3889

    glgpu [0]. HasGLNPOTSupport = 1

    glgpu [0]. GLDriver = "igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igdumdim32, igd10iumd32, i gd10iumd32.

    glgpu [0]. GLDriverDate = "20150817000000.000000 - 000.

    glgpu [0]. CanCompileProgramGLSL = 1

    glgpu [0]. GLFrameBufferOK = 1

    glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = ' 1.30 - Build 10.18.10.4276.

    glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1447]

    glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]

    glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [96]

    glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [16]

    glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [16]

    glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]

    glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096]

    glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [4096]

    glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [64]

    glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]

    glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1

    glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1

    glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 0

    clgpu [0]. CLPlatformVersion = "1.2".

    clgpu [0]. CLDeviceVersion = "1.2".

    clgpu [0]. IsIntegratedCLGPU = 1

    clgpu [0]. CLMemoryMB = 1374

    clgpu [0]. CLName = "Intel(r) HD Graphics"

    clgpu [0]. CLVendor = "Intel(r) Corporation"

    clgpu [0]. CLVendorID = 32902

    clgpu [0]. CLDriverVersion = "10.18.10.4276".

    clgpu [0]. CUDASupported = 0

    clgpu [0]. CLBandwidth = 5.88518e + 09

    clgpu [0]. CLCompute = 20.0346

    Type of license: subscription

    Serial number: 90970308319443247148

    GUIDBucket:

    bucket: 162

    test: ReduceUXFriction

    The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\

    Temporary file path: C:\Users\REN~1\AppData\Local\Temp\

    Zero Photoshop has async I/O active

    Scratch the volumes:

    Startup, 425, 2 G, 334, 6 free G

    Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Required\Plug-Ins\

    Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Plug-ins\

    Installed components:

    A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

    ACE.dll ACE 2016/05/07-01: 09: 29 79,573668 79.573668

    PatchMatch 2016/05/17:03:10:18 1.573920 AdbePM.dll 1.573920

    AdobeLinguistic.dll Adobe linguistic Library 10.0.0

    AdobeOwl.dll Adobe Owl 5.2.11

    AdobePDFL.dll PDFL 2016/04/13-01: 12: 44 79,182661 79.182661

    Adobe AdobePIP.dll 7.3.1.128.44549 product improvement program

    AdobeSVGAGM.dll AdobeSVGAGM 79.571757 79.571757

    AdobeXMP.dll Adobe XMP Core 2016/04/19-13: 13:40 79,159284 79.159284

    AdobeXMPFiles.dll Adobe XMP files 2016/04/19-13: 13:40 79,159284 79.159284

    AdobeXMPScript.dll Adobe XMP Script 2016/04/19-13: 13: 40 79,159284 79.159284

    adobe_caps.dll Adobe CAPS 10,0,0,5

    AGM.dll AGM 2016/05/07-01: 09: 29 79,573668 79.573668

    ahclient.dll AdobeHelp Dynamic Link Library 2.0.0.2

    AIDE.dll HELP-2016/02/29-16:28:21 79,571906 79.571906

    Amtlib.dll AMTLib (64 Bit) 10.0.0.3BuildVersion: 10.0; Brand: Thursday, April 21, 2016 3:6:38) 1.000000

    ARE.dll ARE 2016/05/07-01: 09:29 79,573668 79.573668

    Axe8sharedexpat.dll AXE8SharedExpat 2015/03/13-23: 40:54 79,562390 79.562390

    AXEDOMCore.dll AXEDOMCore 2015/03/13-23: 40:54 79,562390 79.562390

    Bib.dll BIB 2016/05/07-01: 09: 29 79,573668 79.573668

    BIBUtils.dll BIBUtils 2016/05/07-01: 09: 29 79,573668 79.573668

    boost_date_time.dll photoshopdva 10.0.0

    boost_signals.dll photoshopdva 10.0.0

    boost_system.dll photoshopdva 10.0.0

    boost_threads.dll photoshopdva 10.0.0

    CG.dll NVIDIA Cg Runtime 3.0.00007

    cgGL.dll NVIDIA Cg Runtime 3.0.00007

    Adobe CIT.dll CIT 2.1.0.1 2.1.0.1

    CITThreading.dll Adobe CITThreading 2.1.0.1 2.1.0.1

    CoolType.dll CoolType 2016/05/07-01: 09: 29 79,573668 79.573668

    c:\windows\system32\dnssd.dll Hello 3,0,0,2

    dvaaudiodevice.dll photoshopdva 10.0.0

    dvacore.dll photoshopdva 10.0.0

    dvamarshal.dll photoshopdva 10.0.0

    dvamediatypes.dll photoshopdva 10.0.0

    dvametadata.dll photoshopdva 10.0.0

    dvametadataapi.dll photoshopdva 10.0.0

    dvametadataui.dll photoshopdva 10.0.0

    dvaplayer.dll photoshopdva 10.0.0

    dvatransport.dll photoshopdva 10.0.0

    dvaui.dll photoshopdva 10.0.0

    dvaunittesting.dll photoshopdva 10.0.0

    Dynamiclink.dll photoshopdva 10.0.0

    ExtendScript.dll ExtendScript 2016/01/26-16: 09: 33 80.1060872 80.1060872

    icucnv40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

    icudt40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

    icuuc40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

    igestep30.dll IGES 9.3.0.113 drive

    imslib.dll IMSLib DLL 10.0.0.1

    JP2KLib.dll JP2KLib 2016/02/19-14: 20: 46 79,261706 79.261706

    libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

    libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0

    libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

    LogSession.dll LogSession 7.3.1.128.44549

    mediacoreif.dll photoshopdva 10.0.0

    MPS.dll MPS 2016/02/24-01: 09: 44 79,571748 79.571748

    pdfsettings.dll Adobe PDFSettings 1.04

    Adobe Photoshop 2015.5 CC 17.0.1 Photoshop.dll

    Adobe Photoshop 2015.5 CC 17.0.1 plugin.dll

    PlugPlugExternalObject.dll CEP PlugPlugExternalObject Dll (64-bit) 7.0.0 Standard Adobe

    PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 7.0.0.50

    PSArt.dll Adobe Photoshop 2015.5 CC 17.0.1

    PSViews.dll Adobe Photoshop 2015.5 CC 17.0.1

    SCCore.dll ScCore 2016/01/26-16: 09: 33 80.1060872 80.1060872

    SVGRE.dll SVGRE 79.571757 79.571757

    svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

    TBB.dll Intel Threading Building Blocks for Windows 4, 4, 2016, 0120

    tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 4, 2016, 0120

    TfFontMgr.dll FontMgr 9.3.0.113

    TfKernel.dll kernel 9.3.0.113

    Geom TFKGEOM.dll kernel 9.3.0.113

    Adobe TFUGEOM.dll, UGeom © 9.3.0.113

    updaternotifications.dll library Adobe Updater Notifications 10.0.0.1 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 10.0.0.1

    VulcanControl.dll Vulcan Control Library 5.3.0.14 Application

    VulcanMessage5.dll Vulcan Message Library 5.3.0.13

    WRServices.dll WRServices Thursday 7 January 2016 04:50:10 build 0.21960 0,21960

    U3D writer 9.3.0.113 wu3d.dll

    Required plugins:

    3D Studio 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Accented edges 17.0.1 - from the file "Filter Gallery.8bf"

    Adaptive Wide Angle 17.0.1 - from the file ' Adaptive Wide Angle.8bf.

    Angular Strokes 17.0.1 - from the file 'filter Gallery.8bf'

    Average 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Average.8bf '.

    Low Relief 17.0.1 - from the file 'filter Gallery.8bf'

    BMP 17.0.1 - from the file "MultiPlugin.8bf series"

    Camera Raw 9.6.1 - from the file 'Camera Raw.8bi'

    Camera Raw Filter 9.6.1 - from the file 'Camera Raw.8bi'

    Chalk & & charcoal 17.0.1 - from the file "filter Gallery.8bf.

    Charcoal 17.0.1 - from the file "Filter Gallery.8bf"

    Chrome 17.0.1 - from the file "Filter Gallery.8bf"

    17.0.1 Cineon (2015.5.1 x 001 003 x)-from the file 'Cineon.8bi '.

    17.0.1 clouds (2015.5.1 x 001 003 x)-from the file 'Clouds.8bf '.

    COLLADA 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Color halftone 17.0.1 - from the file "MultiPlugin.8bf series"

    17.0.1 - from the file pencil 'filter Gallery.8bf'

    CompuServe GIF 17.0.1 - from the file "MultiPlugin.8bf series"

    Conte pencil 17.0.1 - from the file "Filter Gallery.8bf"

    Craquelure 17.0.1 - from the file 'filter Gallery.8bf'

    Crop and straighten Photos 17.0.1 (2015.5.1 x 001 003 x)-from the file 'CropPhotosAuto.8li '.

    Crop and straighten Photos filter 17.0.1 - from the file "series MultiPlugin.8bf.

    Hatching 17.0.1 - from the file "Filter Gallery.8bf"

    Crystallize 17.0.1 - from the file "MultiPlugin.8bf series"

    Cutting 17.0.1 - from the file "Filter Gallery.8bf"

    Dark strokes 17.0.1 - from the file "Filter Gallery.8bf"

    Deinterlacing 17.0.1 - from the file "MultiPlugin.8bf series"

    DICOM 17.0.1 - from the file "Dicom.8bi.

    Difference clouds 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Clouds.8bf '.

    Diffuse Glow 17.0.1 - from the file 'filter Gallery.8bf'

    Move 17.0.1 - from the file "MultiPlugin.8bf series"

    Dry brush 17.0.1 - from the file 'filter Gallery.8bf'

    Eazel Acquire 17.0.1 (2015.5.1 x 001 003 x)-from the file 'EazelAcquire.8ba '.

    17.0.1 entropy (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Export Tables to color search NO VERSION - from the file 'Export3DLUT.8be '.

    Extrude 17.0.1 - from the file "MultiPlugin.8bf series"

    Routine 17.0.1 FastCore (2015.5.1 x 001 003 x)-from the file "FastCore.8bx.

    Fiber 17.0.1 - from the file "MultiPlugin.8bf series"

    Film Grain 17.0.1 - from the file 'filter Gallery.8bf'

    Filter Gallery 17.0.1 - from the file 'filter Gallery.8bf'

    Flash 3D 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Fresco 17.0.1 - from the file 'filter Gallery.8bf'

    Glass 17.0.1 - from the file 'filter Gallery.8bf'

    Scarlet contours 17.0.1 - from the file "Filter Gallery.8bf"

    Google Earth 4 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Grain 17.0.1 - from the file 'filter Gallery.8bf'

    Graphic pen 17.0.1 - from the file "Filter Gallery.8bf"

    Halftone Pattern 17.0.1 - from the file 'filter Gallery.8bf'

    HDRMergeUI 17.0.1 - from the file 'HDRMergeUI.8bf '.

    HSB/HSL 17.0.1 - from the file "MultiPlugin.8bf series"

    IFF Format 17.0.1 - from the file "MultiPlugin.8bf series"

    IGES 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Ink outlines 17.0.1 - from the file 'filter Gallery.8bf'

    JPEG 2000 17.0.1 - from the file 'JPEG2000.8bi '.

    Flattening coefficient 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Lens Blur 17.0.1 - from the "Lens Blur.8bf" file

    17.0.1 Correction lens - from the "Lens Correction.8bf" file

    Lens Flare 17.0.1 - from the file "MultiPlugin.8bf series"

    Liquefy 17.0.1 - from the file 'Liquify.8bf '.

    Matlab 17.0.1 operation (2015.5.1 x 001 003 x)-from the file 'ChannelPort.8bf '.

    maximum 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Mean 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Measure Core 17.0.1 (2015.5.1 x 001 003 x)-from the file 'MeasurementCore.8me '.

    Median 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Mezzotint 17.0.1 - from the file "MultiPlugin.8bf series"

    Minimum 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    MMXCore routine 17.0.1 (2015.5.1 x 001 003 x)-from the file "MMXCore.8bx.

    Mosaic 17.0.1 - from the file 'filter Gallery.8bf'

    Multiprocessor support 17.0.1 (2015.5.1 x 001 003 x)-from the file "MultiProcessor Support.8bx.

    Neon 17.0.1 - from the file 'filter Gallery.8bf'

    Note article 17.0.1 - from the file 'filter Gallery.8bf'

    Color NTSC 17.0.1 (2015.5.1 x 001 003 x)-from the file "NTSC Colors.8bf.

    Ocean Ripple 17.0.1 - from the file 'filter Gallery.8bf'

    OpenEXR 17.0.1 - from the file "MultiPlugin.8bf series"

    Paint the 17.0.1 - from the file Daubs 'filter Gallery.8bf'

    17.0.1 - from the file palette knife 'filter Gallery.8bf'

    Patchwork 17.0.1 - from the file 'filter Gallery.8bf'

    Paths to Illustrator 17.0.1 - from the file "MultiPlugin.8bf series"

    PCX 17.0.1 (2015.5.1 x 001 003 x)-from the file 'PCX.8bi '.

    Photocopy 17.0.1 - from the file "Filter Gallery.8bf"

    3D Photoshop 17.0.1 engine (2015.5.1 x 001 003 x)-from the file 'Photoshop3DEngine.8bi '.

    Photoshop Touch 14.0 - from the file 'PSDX.8bi '.

    Photo filter package 17.0.1 (2015.5.1 x 001 003 x)-from the file 'ChannelPort.8bf '.

    Pinch 17.0.1 - from the file "MultiPlugin.8bf series"

    Pixar 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Pixar.8bi '.

    Plaster 17.0.1 - from the file "Filter Gallery.8bf"

    Film plastic 17.0.1 - from the file "Filter Gallery.8bf"

    PLY 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    17.0.1 - from the file PNG "MultiPlugin.8bf series"

    Pointillism 17.0.1 - from the file "MultiPlugin.8bf series"

    Polar coordinates 17.0.1 - from the file "MultiPlugin.8bf series"

    Portable Bit Map 17.0.1 (2015.5.1 x 001 003 x)-from the file 'PBM.8bi '.

    Poster edges 17.0.1 - from the file 'filter Gallery.8bf'

    People's Republic of CHINA 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Radial blur 17.0.1 - from the file "MultiPlugin.8bf series"

    17.0.1 radiance (2015.5.1 x 001 003 x)-from the file 'Radiance.8bi '.

    17.0.1 range (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Grid search of colors made NO VERSION - from the file 'Export3DLUT.8be '.

    Crosslinking 17.0.1 - from the file 'filter Gallery.8bf'

    Ripple 17.0.1 - from the file "MultiPlugin.8bf series"

    Rough Pastels 17.0.1 - from the file 'filter Gallery.8bf'

    Save for Web 17.0.1 - from the file "save for Web.8be".

    ScriptingSupport 17.0.1 - from the file "ScriptingSupport.8li.

    Shake Reduction 17.0.1 - from the "Shake Reduction.8bf" file

    Shear 17.0.1 - from the file "MultiPlugin.8bf series"

    17.0.1 asymmetry (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Smart Blur 17.0.1 - from the file "MultiPlugin.8bf series"

    Smudge Stick 17.0.1 - from the file 'filter Gallery.8bf'

    Solarize 17.0.1 (2015.5.1 x 001 003 x)-from the file 'Solarize.8bf '.

    Spaces 17.0.1 - from the file 'Spaces.8li '.

    Splash 17.0.1 - from the file "Filter Gallery.8bf"

    Spherize 17.0.1 - from the file "MultiPlugin.8bf series"

    Sponge 17.0.1 - from the file "Filter Gallery.8bf"

    Sprayed strokes 17.0.1 - from the file 'filter Gallery.8bf'

    Stained glass 17.0.1 - from the file "Filter Gallery.8bf"

    Stamp 17.0.1 - from the file "Filter Gallery.8bf"

    SD 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    STL 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Sumi-e 17.0.1 - from the file 'filter Gallery.8bf'

    17.0.1 summation (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Targa 17.0.1 - from the file "MultiPlugin.8bf series"

    Texture veneer 17.0.1 - from the file "Filter Gallery.8bf"

    Tiles 17.0.1 - from the file "MultiPlugin.8bf series"

    Torn edges 17.0.1 - from the file "Filter Gallery.8bf"

    Twirl 17.0.1 - from the file "MultiPlugin.8bf series"

    U3D 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Draft 17.0.1 - from the file "Filter Gallery.8bf"

    Vanishing point 17.0.1 - from the file 'VanishingPoint.8bf '.

    Variance 17.0.1 (2015.5.1 x 001 003 x)-from the file 'statistics.8ba '.

    Virtual Reality Modeling Language. VRML 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    Water paper 17.0.1 - from the file 'filter Gallery.8bf'

    Watercolor 17.0.1 - from the file 'filter Gallery.8bf'

    Wave 17.0.1 - from the file "MultiPlugin.8bf series"

    Wavefront | OBJ 17.0.1 (2015.5.1 x 001 003 x)-from the file 'U3D.8bi '.

    WIA support 17.0.1 (2015.5.1 x 001 003 x)-from the file 'WIASupport.8li '.

    Wind 17.0.1 - from the file "MultiPlugin.8bf series"

    Wireless Bitmap 17.0.1 (2015.5.1 x 001 003 x)-from the file 'WBMP.8bi '.

    Zig - zag 17.0.1 - from the file "MultiPlugin.8bf series"

    Plug-ins option and third parties:

    WebP Lossless NO VERSION - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Plug-ins\WebPFormat64.8bi CC"

    WebP NO VERSION - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Plug-ins\WebPFormat64.8bi CC"

    Duplicates and plug-ins disabled: NONE

    Plug-ins that could not load: NONE

    Extensions:

    Recent files 1.2.1 - from the file "C:\Program Files (x 86) \Common.

    com.adobe.InApp.Purchase 2.4.83 - in the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\purchase.html CC"

    Library 2.4.83 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\index.html CC"

    Leave 1.2.1 - the file ' C:\Program Files (x 86) \Common.

    Color Adobe 6.1.0 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.KulerPanel.html\index.html CC" themes

    Export as 3.0.6 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.photoshop.crema\PSPanel\dialog.html CC"

    Overview of unit 1.2.0 - from the file "C:\Program Files\Fichiers Files\Adobe\CEP\extensions\com.adobe.preview20155\PSPanel\panel.html"

    com.adobe.preview.Loader 1.2.0 - from the file "C:\Program Files\Fichiers Files\Adobe\CEP\extensions\com.adobe.preview20155\PSLoader\loader.html"

    Export as 3.0.6 - from the file "C:\Program Files\Adobe\Adobe Photoshop 2015.5\Required\CEP\extensions\com.adobe.photoshop.crema\PSPanel\dialog.html CC"

    Install TWAIN devices: NONE

    Sorry for the late reply. I fixed it as follows. It was not enough to run the drop as an administrator, but to give administrator rights for all users (right-click the drop-> properties-> compatibility-> settings for all users-> check "Run as Administrator"). On another device, I also had to do the same thing with Photoshop itself to run the drop.

    For current work, I disabled the need to accept any request of the administrator (search-> Type "UAC").

    Guess that's the best temporary solution.

  • HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

    As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

    I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

    Could you please tell me which intel SATA driver should I install to fix the problem?

    If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

    Thank you very much

    Hello:

    You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

    See if it works...

    Download the drivers from this link below (first listed file - 64-bit).

    https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

    Extract (copy) the files on a USB FlashDrive without all records.

    With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed.

    If you check the box, it only includes the compatible driver.

    Follow the prompts and I hope, will install W7.

  • Windows Setup could not configure Windows on this computer hardware

    Envy-6 1002tx

    Series: [edited by Moderator]

    I could not install windows 7 because of this issue. I tried to load the drivers for the installation of RAID, it indicates the specified location does contain information about your hardware. Although I downloaded the driver from the website of intel (the link you provided).

    Maybe it's that I tried to install the driver from the hard drive?

    Please, give me the detailed step by step solution.

    Hello:

    Please see if it works for you...

    Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

    Extract the files on a usb flash drive.

    With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

    After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

    You should now see the storage driver files listed.

    If you check the box, it only includes the compatible driver.

    Follow the prompts and hopefully, W7 should install.

  • Windows Setup could not configure windows to run on a hardware on this computer

    HP Pavilion Sleekbook 15-b023cl

    I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

    Thank you

    Hello:

    I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

    The most common solution is to try to install the SATA driver.

    Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

    First file listed is for 64-bit operating systems.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

    Use the Drive Options - Advanced method to install and then select the option load a driver.

    If you check the box, only the compatible SATA driver is selected.

    See if it works.

  • 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

    I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

    The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

    I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

    The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

    Hey GMPete

    some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

    I suggest tha contact you hp because it's their recovery process you use

    at the below link HP support forums

    http://h30434.www3.HP.com/

    link below is for direct hp support contact us

    http://welcome.HP.com/country/us/en/contact_us.html

    Walter, the time zone traveller

  • Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

    Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

    Here's the situation.

    I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

    I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

    Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

    Thank you in advance!

    Maybe not...

    The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

    I looked at your system and found this article that you can read to see if it sounds like your original question:

    Windows Setup could not configure Windows on hardware on this computer.

    http://www.Dell.com/support/article/us/en/19/SLN293812/en

    Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

    Could you take the issue in the Dell online community where experts hang out (especially your amber light).

    Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

    http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

    The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

    If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

  • "Installation of Windows could not configure windows to run on a hardware on this computer."

    I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."

    First of all, then someone please help me get windows installed on my raid?

    Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.

    EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.

    Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.

    (1) check each drive individually for issues.

    (2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

    Hello

    I know it has been posted similar problems before, but I still can't get on my instalation.

    I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

    My PC is: ENVY dv6 7214tx

    3rd gener. Intel Core i7-3630qm

    processor 2.4 GHz

    1 TB HARD DRIVE

    8192 MB DDR3 SDRAM

    Blu - ray optical drive

    Windows 8

    NVIDIA GeForce graphics card

    WLAN & Bluetooth

    I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

    What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

    Do you have any suggestions please?

    Thank you very much

    .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

    However, I let it install... I'll see

  • iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

    iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

    Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

    I think you need to contact Microsoft.

  • Error Windows Live Mail: Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages.

    original title: Windows Live Mail

    I am trying to send messages on my own page of email, but windows live mail does not accept my emails.

    The message I get is as follows:
    Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages. My Windows Live Mail mailbox data is currently used by another program, such as a virus scanner.

    I need to close the program or wait for it to complete its operation and then reopen Windows Live Mail. Are the numbers that I get this message: (0x800c0455, 997) then I ok this message and receive another message.

    Windows Live Mail could not be started because. MSmail.dll could not be initialized.
    Windows Live Mail may not be installed correctly.

    Can you please help me settle this question, as I have a lot of mail to be sent to my e-mail address?

    Hello Annie,.

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • Could not open windows live mail, message error 0 x 80004002

    Could not open windows live mail, message error 0 x 80004002 your calendar contains corrupt data that forcing windows live mail to close.  I have all the updates installed, drivers, etc.  Ran auditor of viruses and malware, nothing.  What is the problem?  Thank you, Charlotte

    Hello

    As you are facing problems with Windows Live Mail, I suggest you to report your application in the Windows Live Mail forums for assistance.

    http://www.windowslivehelp.com/product.aspx?ProductID=15

  • I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

    I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

    Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

    Help, please.

    Hello
     

    Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
     
    (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
     
    (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
     
    Warning of the BIOS:
    BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

Maybe you are looking for