Could not save the WRT54G Router settings!

Similar Questions

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Lightroom could not save the catalog

  I get the following error when trying to save my catalog:

  Lightroom could not save the name of the catalog 'Catalogue Lightroom'.

  I use Lightroom CC 2015.5

  I have over 300 GB of free space on my drive.  I have more than 3 GB of photos.

  Backup follows these steps before the failure:

  Integrity checking,

  Copy of catalog

  Catalog optimization

  The Catalog backup compression

  
  

  Any ideas on what to do next?

  I had a chat with Adobe session live support.  She has tried everything that you guys recommended then asked me to delete a bunch of files on my C drive because it was pretty full.  She said that this drive should be at least 2 x the size of the free catalog.  Once I cleaned stuff backup succeeded.  Thank you all.

• Adobe Illustrator CS6: Can not save the file as an EPS file.  Could not save the picture. Cannot print the illustration. Message

  In Adobe CS6 on a PC I can not save the file as an EPS file. I reinstalled the software and made a new document with a simple square in the file, but the error remains. I can save the file to any other format except in EPS format. The error window I said "can't save the picture. Cannot print the illustration. »

  

  Illustrator needs a printer.

  If you haven't set up the print to PDF format or something in the system.

• Could not save the privacy settings!

  I go into 'Settings '. On the 'privacy' in 'history' written ' Firefox: will be remembered in history. " Change to "use... custom parameters. ». Click OK. And then I go into 'Settings '. And behold, it is written: "Firefox: will be remembered in history," that is, the parameters are not changed, even if I changed the. What am I doing wrong and how fix it, please show me.

  Hello

  See the article How to fix preferences that will not save for clues that could help. It could just be that a file is set to read-only.

  Let us know if you find out what causes the problem!

• Could not save the picture. Cannot print the illustration.

  Adobe. Why can't you fix this? I was not able to save a file EPS of Illustrator because I upgraded to 2014 CC last year. Customers ask EPS files and I have no real explanation as to why I can't provide one. I was surprised to see that it is a problem for years for some people, going back several versions. Something has cause this... An answer, that I was the last time that I have asked about it recommended that I just use. HAVE files instead. If this is what Adobe is trying to (gradually EPS) then great. Tell us if I tell customers the same thing. Tell customers that I can't save an EPS file because I can not understand how does not fly!

  While you're there, Photoshop refuses to open the EPS files from the same update of CC2014. It is said he can't "parse" the file. Same question?

  Extremely frustrated.

  Save on your hard drive is good.

  Describing the text is thus (at least for logos).

  Options:

  EPS is a file of 2 parts: a fully editable part of AI and an EPS not quite as fully editable. The part of the EPS will always be version 3, because it's the latest version. Only the part of AI will be version CC, CS6 or whatever.

  When you want this really compatible with anything that EPS you throw, you want to save a version 3 EPS (not CS3). The file will be smaller and there will be no party GOT in there. Alone, this could reduce your problems. If you choose to save EPS in this way, always save an AI for your internal use, making changes or else.

  Another thing: as the EPS is closely related to printing, you can still have a printer connected and powered when you save an EPS.

• Could not save the different string value to each element of the array

  I have a configuration of VI to read several channels Veristand project.  The entrance is a table 1 d of channels, (an element for each channel, I want to read).  The channels have different names, each of the elements in the chain must be different.  I am able to edit each item and run the VI, and it works fine.  However, if I save, close and reopen the VI, all elements show the same value (what happens to the value of the last element for which I defined a default value).  Is this behavior planned, or have I missed a configuration setting which would allow different string values?  Please notify.  Thank you.

  GSinMN

  Make sure that you select the table and not only one item when you right click-> set by default on the front panel.

• Will not save the site cache settings

  Dreamweaver CC2015.2 on Mac OS El Cap 10.11.6

  I'm trying to disable the site for my large sites cache. I go to the Site-> Manage Sites and selecting my site. I chose advanced settings, local news. I have to uncheck "enable Cache". The cache is disabled for the site until I re - start Dreamweaver and the setting is on "on" for the site.

  Any help would be appreciated!

  When DW start doing goofy things like that, I usually delete the file cache program to recover...

  DELETE cache: removing a corrupt cache file

  -Sometimes, the clearing of the record of the entire configuration of the described location will do so when the cache file is not enough.

  If this does not work, restoration of DW preferences generally will be: unusual behavior in Dreamweaver? Try restoring preferences.

  .. .and if all else fails, a total erase/reinstall using the cleaning tool will give you a new installation of 100% (make backups of your site first settings if you do this under Site > manage sites > export): use of the cleaning tool cloud creative to solve installation problems

• I filled out all the fields with the data but could not save the file with the data.

  Please help because I do not restart and repopulate the data. I found that if I go in advance, then extend the functionality of Adobe Reader, I can fill in the form again and save and print it. But that's before I fill the data, now that I filled until I put it to extend the functionality, is there a way to save and print?

  Thank you.

  Hello.

  You cannot extend the reader a PDF with Adobe Reader form, it requires Acrobat Pro.

  Adobe Reader X and older versions cannot save a completed form is not extended to PDF, but it can be printed * in all cases.

  XI of Adobe Reader and Acrobat Reader DC can save and print * a PDF form completed, extended or not.

  Acrobat Pro or Standard (all versions) can save and print * a PDF form completed, extended or not.

  * Assuming no restriction file printing

• I can't turn on the automatic updates give me a message that the Security Center could not change the Automatic Updates settings. Please help me...

  Automatic updates not turn off why, I already scanned my computer for viruses and found nothing, I have already install service Pack 3 and did not work. I turn on manually but when I go on the center of Panel and the security of the control still appears off the coast.

  Maybe try the Microsoft Fix It solution found on this page http://support.microsoft.com/kb/971058

• Could not save the sound in windows 7 64 bit with Conexant Smartaudio HD

  Facing problem in sound recording & speech recognition in my laptop installed with Windows 7 Home Premium (64-bit).

  Audio by default in my portable device is HD(Driver version 8.54.0.53; date 18-02-2011) Conexant Smartaudio.
  The system is not able to any sound during recording. Verified that the microphone is not muted

  Hello

  It gives you no specific error message?

  If I had the same problem, I tried the methods to solve the problem.

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method2:

  I suggest you to update the driver on the manufacturer's Web site.

  See the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-75899-1

   

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  If this problem persists please post us. We will provide you with additional options that you can use to get the problem resolved.

• Firefox and Palemoon does not save the settings of a Web site.

  He is a recent problem. I use Firefox 25.0.1 because progress of download in Firefox 26 changes are unacceptable.

  I use www.nzbindex.nl a lot - Out of the blue Firefox will not save the settings, but will Google Chrome. In my view, that the problem is a Java problem. Any advice would be appreciated.

  This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click on "Site Identity" (globe/lock) in the address bar
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  It is not advisable to continue to use older versions of Firefox with disclosed security vulnerabilities.

  • http://www.Mozilla.org/security/known-vulnerabilities/Firefox.html

• Failure of the Time machine backup could not save "My Passport"

  When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

  Failure of the Time machine backup could not save "My Passport"

  
  

  Does anyone has an idea to help me with this problem?

  
  

  (Sorry for my English but I speak French in Switzerland...)
  

  Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try.  http://pondini.org/TM/A4.html

• Domain Services Active Directory could not create the ntds object due to dns settings look for failure on the specific domain controller

  Forest consist of 1 DC server 2003 with all fsmo and 2000 1 domain controller roles.

  Completed all questions of adprep and when I tried to promote server 2008 standard edition to a domain controller, had the error message stating that Active Directory could not create the NTDS settings for the domain active directory CN = NTDS controller

  Settings, cn is 2k8dc1, cn = servers, cn = Default First Site Name, c is Sites, cn = Configuration, dc is Marie-France, dc = com on the ad distance dc server2.amanua.com.

  To ensure that the provided network credentials have sufficient permissions

  "The DSA operation unable to act because of the failure of the dns lookup"

  The idea was to demote the 2000 machine when I completed the installation of 2008.

  Hello

  You can display the query in the link provided to improve assistance:
  http://social.technet.Microsoft.com/forums/en/categories/