Could not see the iSCSI target in the adapters iSCSI software under Configuration details page

Detailed description:

After you add the IP address of the iSCSI target in the target iSCSI dynamic discovery Tab names can be seen under static discovery. But, iSCSI target is not considered as adapters iSCSI software tab Configuration details page.

This iSCSi target is already mounted as a data store VMFS5 with some VMS on an another ESX which is part of the different ESX cluster in the same center of work data.

thinking the im network configuration

You vm kernel ports configured correctly?

you use VLAN? If so see if your config of vlan is correct

Tags: VMware

Similar Questions

  • Could not see the LED in Windows 7 X 64

    Hello

    I write a progrm by measurement studio 8.1.2 + vs2005 in win XP, and I put a few LED components in form and generate an MSI for x 86.

    When I try to run the program to the other PC, a PC with windows 7 x 64 could not show the LED components.

    I try the other PC with windows 7 x 64 and the work, just only a PC could not see the LED components.

    How can I do?

    Thank you

    Dennis

    In general, this has to do with the Mesa.dll dependence, which is necessary for styles 3D as explained in this KB:

    http://digital.NI.com/public.nsf/allkb/ABAE912AAE671AC08625788D0076BE51?OpenDocument

    There is also a problem known to distribute to Windows 7, as documented in this KB:

    http://digital.NI.com/public.nsf/WebSearch/046E1B36934C7C198625788000591A1E?OpenDocument

  • Inline < mx:Image... > < mx:itemRenderer > element could not see the defination of method

    I was following the code and got a compilation error ("possiblely calls a function not defined") because the < mx:Image... > in the < mx:itemRenderer > did not see the method defination 'aMethod ':

    < mx:Form... >

    < mx:Script > <! [CDATA]

    ....

    private void aMethod(evt:Event):void {
    Code of...
    }
    []] > < / mx:Script >

    < mx:Canvas label = "Tile view" width = "100 percent" height = "100%" >

    ...
    < mx:TileList id = dataProvider = "{this.photoDP"photosTileList"}" width = "100%" height = "100%" > "
    < mx:itemRenderer >
    < mx:Component >
    < mx:Image horizontalAlign = "center" source = "{data.url.text ()}" "
    "toolTip =" {data.caption.text ()} "width ="55"height ="38" complete =" aMethod (event) "/ > <! - it causes the error - >
    < / mx:Component >
    < / mx:itemRenderer >
    < / mx:TileList >

    < mx:Image... = full "aMethod (event)"/ > <!--it's OK here--> "

    < / mx:Canvas >

    < / mx:Form >

    I don't know why the line < mx:Image > < mx:itemRenderer > inside cannot see the defination of function 'aMethod' in the same mxml file.

    Any suggestions?

    You need outerDocument and the method cannot be private, it must be public:

    Complete = "outerDocument.aMethod (Event)" "

    If this post answers your question or assistance, please mark it as such.

    Greg Lafrance - Flex 2 and 3 certified ACE

    www.ChikaraDev.com

    Flex / development, training, AIR and Support Services

  • could not see the image tiff, printed using Microsoft Office Image writer

    My OS is Windows Vista Home Premium.

    I am able to print a document using the printer, but when I print the same document by selecting the Microsoft Office Image writer, I cannot find the image file to the location that I saved. I am able to see the image immediately after printing, but does not after the closing of the window. I am able to see the document I'm trying to attach it to an email in the file to be attached to window, but if I join I get an error message saying that the file is not found at the location. If anyone can help...?

    Ooes that happen with all the tiff images or just a specific document?  It happens with any other type of file?

    If it occurs with a single document and works very well with other tiff files, then I would say that the file is corrupted.  Can you open it directly?  It may be a problem with Office Image Writer, and possibly your e-mail program - but it's not likely if they work with other files, tiff and other file types.

    Maybe the Office has a feature to repair corrupted files.  Also if the problem affects all files tiff and other types of files when you use Image Writer, I suggest that repost you your question in the Forum of the Office to: http://www.microsoft.com/office/community/en-us/flyoutoverview.mspx where the experts at the office will be more than happy to help you with your problem.  You can also find 3rd-party file corruption repair sofware online by searching for what I said just to www.download.com, www.tucows.com, Bing and Google.  If you use Outlook for e-mail, you can after there as well to cover the messaging problem you described.  If you use another e-mail program, answer simply by name.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Could not load the turbo tax software & this message "the EncodePointer point procedure entry is not found in the dynamic library KERNELL32.dll.

    Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll.     can someone tell me how to solve this problem?

    I have windows xp 2002 Service Pack 2

    Hi henryjeshom,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Uninstall and reinstall the application of Turbo tax.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    If the problem persists, contact support for Turbo tax for more help and information.

    http://TurboTax.Intuit.com/support/

  • Could not get the "EPrint printer Code" no Services Web Page.

    I am trying to connect my impression to the Eprint Services. When I get to the IP given to me by the Configuration Page I printed, I you and can not find a tab HP Webservices to print the button print information sheet.

    I have a HP LaserJet Pro CP1025nw color printer.

    Can someone please help soon, I am trying to get this resolved quickly.

    SNWLeader,

    Looks like you need to update the firmware on your printer, as web services has not been added to a newer firmware version.

    To do this, you will need to download the updated firmware from HP LaserJet utility.

    For Windows: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=us&dlc=en&lc=en&os=4062&product=4052972&sw_lang=

    For Mac: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-94937-3&cc=us&dlc=en&lc=en&os=219&product=4052972&sw_lang=

    Run that program and it will install the latest version of the firmware on your printer. After you do this, go back to printing EWS by putting the printers IP address in the browser address bar. You should now see a tab of web services. After you enable web services, give him a few moments and your code printer will print off the coast!

  • Lack of drive D, could not load the required additional software

    After the disappearance of 'maintenance' of my D drive (CD/DVD). I've been using Microsoft, but after trying to start the restore process, I received the automated message "Please install other required software then visit Microsoft Fixit. "However, when I tried to install by pressing 'Yes' or the link itself, nothing happened. Advice please? Thank you.

    After the disappearance of 'maintenance' of my D drive (CD/DVD). I've been using Microsoft, but after trying to start the restore process, I received the automated message "Please install other required software then visit Microsoft Fixit. "However, when I tried to install by pressing 'Yes' or the link itself, nothing happened. Advice please? Thank you.

    What does the 'service' mean?  If the CD/DVD drive has been deleted physically, it might not properly re-inserted in the computer.

    If it isn't where you went, then go inthe article linked and do the manual repair ("fix it myself).

    If you went somewhere else for 'Microsoft Help' Please provide a link.

  • Could not load the dll target, the error code 126

    A "runner error" box keeps popping up saying "could not load the dll target, error 126" code.  This appears at all different times, even when I'm not using the computer.  I don't know why it gives me this error or how I can get rid of him for good.

    Hello Tracy,.

    Try to configure your system to boot into boot mode (Ref: http://support.microsoft.com/kb/310353) will help you identify the problem.

    I hope this helps.

  • GLWB-10521: could not resolve the ASM label

    Hello

    I try to install Oracle Grid Infrastructure 12 c Release 1 on Windows Server R2 2012 in a hyper-v Lab (to my intention is to install a complete rac - later).  I created my ASM storage with the role of ISCSI target (4 discs 20 GB each, all the dynamic extension), and they are all visible from both nodes.  I can ping all the IP addresses of all servers involved.  I required prior tasks, and there is one thing that I am invited to check.  Error message is:

    «Device checks for ASM - there is a control to check the devices specified in the requirements for the ASM.»  Error:

    -

    GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA0' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.

    -

    GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA1' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.

    -

    GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA2' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.

    -

    GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA3' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform. »

    I opened Asmtoolg, and everything seems to be ok in there (all discs are stamped and are visible etc.).  I recognize that this is a complex area, so I understand that it will be difficult to difficult to diagnose.  I was really surprised to not find anywhere, any success on the internet for the GLWB-10521 error code well.  Does anyone have ideas of things I could try?

    Thanks in advance

    There is a bug (Bug 20428707 : GLWB - 10521 RAC INSTALLATION)

    Re: GLWB-10521

  • ORA-16783: could not resolve the deficit for the database

    I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.

    ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.

    Output of data protection

    DGMGRL > show detailed configuration

    Configuration - DRSolution

    Protection mode: MaxAvailability
    Databases:
    emadb - primary database
    Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database

    emadbdg - (*) Physical standby database
    WARNING: ORA-16817: configuration not synchronized rapid failover

    (*) Fast failover target

    Properties:
    FastStartFailoverThreshold = "30"
    OperationTimeout = "30"
    FastStartFailoverLagLimit = "30"
    CommunicationTimeout = "180"
    FastStartFailoverAutoReinstate = 'TRUE '.
    FastStartFailoverPmyShutdown = "FALSE".
    BystandersFollowRoleChange = "ALL".

    Fast-Start Failover: ENABLED

    Threshold: 30 seconds
    Target: emadbdg
    Observer: emarn1
    Offset limit: 30 seconds (do not use)
    Primary closure: FALSE
    Auto-Rétablir: TRUE

    The configuration status:
    ERROR


    DGMGRL > see the detailed database emadb

    Database - emadb

    Role: PRIMARY
    State of destination: TRANSPORT-WE
    Occurrence (s):
    emadb

    Database error (s):
    ORA-16783: could not resolve the deficit for the database emadbdg

    Warning (s) of database:
    ORA-16817: unsynchronized fast-start failover configuration

    Properties:
    DGConnectIdentifier = "emadb.
    ObserverConnectIdentifier = "
    LogXptMode = "SYNCHRONIZE".
    DelayMins = '0'
    Binding = "optional."
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = "300"
    NetTimeout = "30"
    RedoCompression = "DISABLE."
    LogShipping = 'ON '.
    PreferredApplyInstance = "
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO '.
    StandbyFileManagement = 'AUTO '.
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = "4"
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = 'emadbdg, emadb '.
    LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
    FastStartFailoverTarget = "emadbdg".
    InconsistentProperties = "(monitor).
    InconsistentLogXptProps = "(monitor).
    SendQEntries = "(monitor).
    LogXptStatus = "(monitor).
    RecvQEntries = "(monitor).
    Nom_sid = "emadb.
    StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
    StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
    AlternateLocation = "
    LogArchiveTrace = '0'
    LogArchiveFormat = '% t_%s_%r.dbf '.
    TopWaitEvents = "(monitor).

    State of the database:
    ERROR

    DGMGRL > see the detailed database emadbdg

    Database - emadbdg

    Role: STANDBY PHYSICS
    State of destination: apply
    Transport delay: (unknown)
    Apply the Lag: (unknown)
    Real-time query: OFF
    Occurrence (s):
    emadbdg

    Warning (s) of database:
    ORA-16817: unsynchronized fast-start failover configuration

    Properties:
    DGConnectIdentifier = "emadbdg".
    ObserverConnectIdentifier = "
    LogXptMode = "SYNCHRONIZE".
    DelayMins = '0'
    Binding = "OPTIONAL."
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = "300"
    NetTimeout = "30"
    RedoCompression = "DISABLE."
    LogShipping = 'ON '.
    PreferredApplyInstance = "
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO '.
    StandbyFileManagement = 'AUTO '.
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = "4"
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = 'emadb, emadbdg '.
    LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
    FastStartFailoverTarget = "emadb.
    InconsistentProperties = "(monitor).
    InconsistentLogXptProps = "(monitor).
    SendQEntries = "(monitor).
    LogXptStatus = "(monitor).
    RecvQEntries = "(monitor).
    Nom_sid = "emadbdg".
    StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
    StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
    AlternateLocation = "
    LogArchiveTrace = '0'
    LogArchiveFormat = '% t_%s_%r.dbf '.
    TopWaitEvents = "(monitor).

    State of the database:
    WARNING

    DGMGRL >
    DGMGRL >
    DGMGRL >
    DGMGRL >
    DGMGRL > output

    Alex Antony Samantha wrote:


    Head node

    SQL> archive log list
    Database log mode            Archive Mode
    Automatic archival            Enabled
    Archive destination            /opt/app/oracle/oradata/emadb/archivelog1
    Oldest online log sequence     65
    Next log sequence to archive   67
    Current log sequence            67
    
    SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
    
    THREAD# MAX(SEQUENCE#)
    ---------- --------------
          1           925
    

    It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
    When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?

    And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
    Perform the two methods.

    (1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
    (2) conduct 3-4 log switches
    (3) SQL > alter system set log_archive_dest_state_2 = 'enable '.

    and displays the alert log database and backup files.
    And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.

    second method
    (1) copy archives missing from primary sequence of 29
    (2) place manually and then perform a recovery
    or
    (3) retrieve manually

    And update with your conclusions after all these lists.
    Thank you.

  • In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

    In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
    I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
    I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
    I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

    What do you see on the page, just nothing?

    Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

    If you open a new tab, which solve this problem?

    Edit: sorry for typo's fault: browser.newtab.url

  • The attention! "Could not initialize the component of the application security...". »

    I started receiving this alert after restart last Saturday (22/02/2014) and freezes before Thunderbird it is fully operational: (incorrect application behavior?)

    Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

    I have over 500 GB free on the hard drive and have checked the TTBOMA directory. As recently as this
    morning I still once uninstalled using TB TB uninstall utility, rebooted and reinstalled from the Mozilla Web site. Nada,.

    Toshiba Satellite L875D
    Windows 8

    Troubleshooting Info:

    Thunderbird
    Version 24.3.0
    User Agent Mozilla/5.0 (Windows NT 6.2; WOW64; RV:24.0) Gecko/20100101 Thunderbird/24.3.0

    Any help out there?

    Delete the file cert8.db in Thunderbird profiles folder.

    This will remove all the intermediate certificates Thunderbird has stored.

  • get the message "could not initialize the browser security component" offers solutions does not

    I get a message "could not initialize the browser security component" more a screen empty. 5 solutions offered in aid, only to create a new profile help, but this helps only for this session! So, I'll have to create a new profile each time I start Firefox. This means not favourites, without Add-ons (they require a reboot), etc. I even tried to delete the profile by default, but it does not help. The new profile is deleted whenever I start. What should I do?

    I've done this several times. The new profile would work for a single session. Each time, Firefox (or something) would remove the new profile, so he did not; I'm done with the default profile, which was obviously altered. Here's what finally worked. Of after your 1st answer, I saw that the other profiles exist as subfolders in the profiles folder, even if they were not listed when I did firefox.exe - p. So, I got the idea to uninstall Firefox and see if these files were still there. And they were! In fact, records of Mozilla, Firefox and profiles had not deleted with uninstall. I deleted the files, re-installed and now I'm fine and write for Firefox. So, if someone continues to have problems with a corrupted profile, suggest to uninstall and then deleting all records related to Firefox that are left behind.

  • Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

    Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
    restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
    behavior when you access security features.

    See:

  • HP 4620: HP 4620 scans very well, but could not save the analysis in a file

    The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

    Hey @motikama,

    Welcome to the Forums of HP Support!

    I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Uninstall all software associated with the printer to your computer.
    2. Restart your PC.
    3. Download and install the latest drivers by clicking on this link.

    Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Maybe you are looking for

  • BluetoothDun

    When I check the stock Task Manager sometimes I find BluetoothDun running. I have not all bluetooth devices and have not turned it on. What would be the cause of this?

  • HP G62 B10SP &gt; HD5470 driver problem!

    Hi guys,. I have a HP G62 B10SP, the problem is that the drivers(intel/ATI) on page HP fine work, I can spend from intel to AMD do map no problem. The problem is that the driver on the HP page is obsolete, and when I installed the most recent driver

  • Windows Xp Sp3 System Restore Points in the process of disappearance

    Without warning my system restore points are missing. I checked all the obvious reasons (lack of disk space, etc.) I can always put a manually restore point, but when I do it disappears the next time and I'm back to a restore point Anyone in the comm

  • How can I get the viewer photo and fax for windows on windows 7

    my computer does not have windows fax and picture viewer but has the windows photo viewer. Unfortunately the windows photo viewer is not moving images. I need help Thank you

  • Drive to withdraw safely on Windows 8

    Hello I have a Sony Vaio laptop with windows original 8. Drive removal safe on this windows do not work and when I want security remove my drive display messages below. I know that there is a problem with my laptop because I've used windows 10 and I