Could not write the path value in the \SYSTEM\CurrentControlSet\Control\NTMS\OMID\Tape\ATF key. Check that you have sufficient access to that key or contact your support team.

Similar Questions

• Error 1402 could not open key HKEY_Local_Machine\software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

  Error 1402 could not open key HKEY_Local_Machine\Software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

  We have solved this problem by granting explicit permission at the same time "domain users" and "domain administrators" you can plug in "domain" in the field and the search for the users and select them.  But this solved the problem for us.

• error: could not write the destination file (1 003)

  I am trying to export 40 photos of Photos.  I just installed OX El Capitan.  Only 13 of them get downloadable.  For the rest, I get this message: error: could not write the destination file (1 003)

  I tried to manually fix the library but still does not work (command + option + opening photos).

  And I do not have a backup on icloud photo library I have a backup on an external drive...

  You try to export the originals of your photos or revised versions?

  When you try to export photos to?

  You try to export to a folder on your system drive or a folder on an external drive?  If an external drive, which is the file system? And how the player is connected?

  You have permissions to write to the folder, when you export to?

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• Failed: Could not find the system volume, reconfiguration is not possible

  Hi all

  When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

  (FAILED: could not find the system volume, reconfiguration is not possible. ) )

  I use VMware vCenter Converter Standalone 6.1.1

  Anyone encountered this problem and found a solution?

  The log file is attached.

  Thank you very much!

  Terence

  Your problem is:

  2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

  Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

  Also, keep in mind that mount point C:\backup\Ext\ is not copied.

  HTH

• Could not load the Brother printer control panel.

  Could not load the Brother printer control panel.

  I used an all-in-one Brother DCP-J315W for months, Windows 10.  However, in the last week or two, when I opened the icon, I just get a white silhouette of the Panel but no link to 'Sweeping the Image' or 'Scan OCR"etc.

  On a right click on the Panel, I see "not responsible for the animation" and "About Adobe Flash Player 20.0.0.228"

  Anyone have any ideas?  Seen elsewhere?

  I have an answer now, brother.  It is indeed a problem related to the recent update of Adobe.

  If anyone needs to know, you can find it here: -.

  http://support.brother.com/g/b/faqend.aspx?c=eu_ot&lang=en&prod=dcp6690cw_eu_as&faqid=faq0 0100228_000

  Kind regards.

  Geoff H.

• Vista - FAILED: could not find the system volume, reconfiguration is not possible.

  Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.

  Thanks in advance, Dave

  Make sure your username is Administrator and UAC disabled on your Vista machine. HTH

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Could not locate the system volume

  I have a very similar problem that has been published before; However, the posted solution worked.

  I can't find in the newspapers, what is actually wrong.  If anyone can help, I'd appreciate it.

  "Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.

  I use VMware vCenter Converter Standalone 4.0.1"

  Newspapers reported the following errors (which are equivalent):

  Impossible to reconfigure a source that doesn't have a system volume

  converter.fault.ReconfigurationNoSystemVolumeFault

  It seems that there are 2 physical disks in the system

  > Drive:
  . \PhysicalDrive0 a type of adapter: 1

  > Drive:
  . A type of adapter \PhysicalDrive1: 1

  Converter is to see the C:\ as long as the system volume, but there is no active flag set on it.  The second disc is recognized, but according to it's Converter:

  > is a dynamic volume. No significant partition information may be associated with him

  So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.

  If it's a mirror of the software, you can:

  -remove the mirror and conversion

  -Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter

  If it is a dual-boot configuration, then I do not think that it is supported.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Windows 10 we could not update the system reserved partition

  I have windows 7 Home Edition premium, no idea why it says windows 10 we could not update the partition system reserved when I try and update?

  • Make sure you have enough disk space.
  • Although the recommended minimum requirements are 16 GB (32-bit), 20 GB (64-bit), if you upgrade from a previous version of Windows or a previous version, you will need to have at least 40-50 GB of free space to accommodate the installation files.
  • First run Disk Clean up.
  • Archive files rarely used to an external hard drive.
  • Consider data synchronization to OneDrive or similar online service and do a custom installation.
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Disable the general USB peripherals (for example - smart card reader).
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (e.g., USB sticks, external hard drive, printers, peripheral non-essential).

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Click on HERE to download ISO for 10 Microsoft Windows official media.

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Could not start the system image restore

  I am running Windows 7 Enterprise 64-bit.

  I want to try to create "system image" and then restore it. Where will it work for me I will use all my 20 PC.

  My PC has a C: drive

  I partitioned it and now I have C: and D: with an abundance of free space on each.

  What I did:

  1 created 'image system' and it stored on D: Finally I use the external drive for backups (currently I don't have it and I just want to test that I could save/restore)

  2 created "Repair disk", then it I created a bootable USB key, because some of my PC doesn't have a CD ROM

  3. start the machine from USB and select "Restore from system image". He acknowledged that the image is on D: but immediately restore failed with this message:

  "Cannot restore the system selected in this recovery environment image."

  Navigation on various forums, it seems that this message comes because of 32 bit and 64 bit OS repair disc.

  Where my 2 questions:

  1. maybe my question related to the fact that I'm not restoring external hard drive but another partition?

  2. in case I have a problem with 32 bit vs 64 bit... and how it could happened? I used Win 7 Enterprise to create this disc, but I don't know if it defaults to 32-bit or 64-bit or he even gave me the opportunity to choose amongst...

  Any suggestions?

  Thank you

  Windows 7 Enterprise is only available to corporate customers, so you should address your question to your IT Department.  The proper forum for business clients is MSDN.   No indication they provide is likely to result in the range commonly used business tools - network-wide.

• Refresh the 10 7 window moved States we could not update the system reserved partition

  Hi I have windows 7 pro sp1 64-bit on a dell optiplex 960

  reserved for the windows install 10 tries to install each time at the beginning but the top

  Windows 10 update will not be installed, lt says "we couldn't update the system reserved partition."

  but does not display an error code

  I could use some help to fix this please?  I'm pretty useless on computers would be appreciated helping hand step by step

  Kind regards

  Tom

  Base partition to reduce the partition of Windows 7 front enough so to "Extend" the 350 MB system partition by using the unallocated space created by reducing the Windows partition.

  http://www.partition-tool.com/

  Note: Do not exceed 350 MB as a larger partition and can cause other problems especially after that it exceeds about 375 MB.

  J W Stuart: http://www.pagestart.com

• G72-B62US: could not start the system after Go Back Windows 10-7

  I had to go back to Windows 7 from Windows 10 because I couldn't get wireless adapter to work with a Wi - Fi connection.  I was at risk of ending my window a month to roll back.  After the Roll Back Windows 7 Gets an error on startup and the blue screen of death flashes.  Windows is trying to perform the Startup Repair and fails.

  The system, I cannot get Safe Mode.  As soon as I push the power button it gives me two choices - launch Startup Repair) 1 or 2) start Windows normally

  The repair utility says:

  Startup Repair cannot repair this computer automatically.

  Under the heading view problem details, he says:

  Signature of the problem:

  Problem event name: StartupRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200680 problem

  Signature of the problem 05: AutoFailover

  Signature of problem 06:5

  Signature of the problem 01: NoRootCause

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Once I close this window I'm in HP Recovery Manager.  It gives me one of the following options:

  Microsoft System Restore - there is no restore point

  System recovery - it says to restore your computer to out-of-box state

  Reduced Image Recovery - having said that to restore your computer to a Windows clean, the software with minimal and drivers

  So now I'm dead.

  What can be done for me other that start over completely with a cost of Windows 7?

  Unfortunately, the Win10 GoBack function is showing himself to be unreliable, because you're not the only one to declare that use it has left their machine unusable - same thing happened to me and I had to restore my laptop HP recovery HP media.

  You can try following the steps in the post of recovery HP Win7., but my experience has been that the upgrade of Win10 corrupt recovery by-product information: HP PCs - performing a recovery of system HP (Windows 7) | HP® customer support

  If this does not work, you look at using HP recovery media: HP PCs - getting HP discs recovery or a USB HP recovery disc | HP® customer support