CP1515n - launch the installation CD on each cell unique in the WIFI network?

Similar Questions

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• Can't connect to WIFI on all locations where the WIFI network is available

  Sometimes my computer will connect and detect the networks without wire, Hotels, airports etc. but do not work in the home and in some offices.

  I run put WXP updated with SP2 have an Artheros5005gs adapter. Any ideas?

  Hello

  It is a matter of compatibility between the WLan router and wireless network card.
  If the wireless network adapter does not support the same Wlan standards then you will not be able to establish the WiFi connection.
  Especially the hotspots (Wlan on airports, city, etc.) are not secure and that is why the laptop automatically connects to these wireless LANs.

  The WiFi network at home or in the office is secure for most and you need a right encryption key to connect to these wireless LANs.

  So I think you should check you settings router WLan configuration and usage of encryption right key, SSID, etc.

• L440 kills the wifi network

  Hello

  A few days ago, I bought Lenovo L440.

  I have problem with Wi - Fi. WiFi works perfectly with other devices: phones, tablets, laptops. When I connect to wifi with L440, wifi works from 5 to 30 min. and then crash. L440 kills the wifi network. All devices cannot connect to wifi up until I have to reboot the router.

  I've read about this problem, but I can't find in the Manager of tasks "discovery.exe" or LenovoEMC Storage connector Contral Panel.

  p.s. Win8

  Post what you did to solve the problem. There are a lot of users having problems with wifi to l440.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• MDS is the WiFi networking

  My job application on mode MDS and BIS (IE push and pull)

  Now I have WiFi network...

  is MDS (push) WiFi networking

  Yes. The BlackBerry is trying to keep a tunnel to the BES/MDS via the WiFi network, the network provided allows such a tunnel (whether to the RIM network infrastructure or directly to the router BES/MDS).

• restrict the physical size of the wifi network

  Hello

  I intend to cover the building 80x80m by the amount of 1131AG APs and WLC4402 controller. But the strong demand of the customer is to physically restrain the posibilities of the long distance wifi connections (100 m and more building).

  Is there a function in wifi Cisco to drop connections incoming in case if the customer is 100 + m AP? (I mean that the power of the customer is high enough for this)

  What are the regular methods of resricting the physical size of the wifi networks?

  Thank you.

  Someone could be more than 100 meters away using a parabolic grid antenna, and the signal strength is perhaps not different from your regular users.

  You can try using the location device, but I think that even this might go a little goofy, if someone tries to spoof a MAC address.

• How to launch the wifi on a new computer Satellite L350?

  Hello.

  I have just bought a new Toshiba L350 this morning, but I do not know how to launch the Wi - Fi system?

  Thanks for your replies.

  Hello

  Usually, you will be the WLan switch on IT and must use the FN + F8 key combination.
  This should allow the WLan.

  But just one question: why you n t read the user manual? My laptop has been preloaded with manual if the PDF file format

  Was easy to find all the details and inof

• Automatically by turning and the wifi network?

  Is it possible to create a guest wifi network that automatically turns on market every day at certain times?

  Sorry, but no.

  However, there is a way to control the hours of each day that a wireless device would be authorized to connect to the Guest network.  For example, an iPad has to connect... Every day... Between... 08:00 and 22:00.  the iPad is not able to connect to any other time.

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• Satellite L300 loses the IP address using the WiFi network

  Hello

  I recently bought a Satellite L300 and installed Windows XP. While I installed all the devices available for download drivers my wireless connection is still not working properly - the IP address shows as lost after several minutes of functioning and on several occasions the laptop froze and had to manually turn off (if the wireless connection is turned off to this isn't the case)

  You have ideas or suggestions on why this is happening?

  Thanks in advance for your support!

  Hello

  Check if the most recent BIOS is available for this model of laptop and if yes, then try to update.
  As next update Win XP to the last State. All MS patches, updates must be installed.

  I m not very well what WLan card you but you are trying to install the WiFi adapter driver on the WLan card manufacturer site.

  Finally, and especially if you lose the WLan IP address and then start the CMD (in the window RUN) and type this command:
  ipconfig / renew

  Check it out!

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• G5E22EA #A2N: unable to connect to the wifi network

  When I turn on the wifi in my HP Pavilion 15 laptop pc and try to connect to my network of your choice... it says "check and connection. After a minute, it says "cannot connect to this network '...

  I tried to use the other pc and smartphones to connect to my network of your choice via wifi and they connect successfully and I can use wireless net in other devices!

  Hello @Khaled-819.

  Thank you for your query,

  I understand that you are unable to connect to your wireless network, but other devices connect correctly.

  Have you ran the Windows troubleshooting tool?

  Did you run the Internet functionality and security in HP Support Assistant ?

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  If you are unable to connect I would test for a hardware failure.  You will locate network under the title of part.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb up below.

  If you were now able to solve your problem please click on accepted the solution to help others.

• Printer HP Officejet 6100 (h611a) can not find the WiFi network

  My printer HP Officejet 6100 has recently lost its eprint connection and would not reconnect.  I asked for help and told

  try to use an IP address manually.  I tried this according to the instructions provided to me for the manual IP address, subnet mask and so on.  I selected apply.

  The restarted printer and now the printer cannot be found or will not connect to my

  wireless network.

  I tried to power on the printer, the modem and the router so that it would reset but the printer would not still find or connect to the wireless network.  The little blue light on the printer for wireless connection just continues to blink.

  Because it connects to the wireless network I can not go back in the server web part to cancel the IP address manually and other changes.

  Is there a way I can reset this?  Or get my printer to connect to the wireless network.

  Steve

  Hi scthom,

  Welcome to the Forums of HP Support! I see your HP Officejet 6100 has recently lost its connection ePrint, and now, you are not able to get connected to your wireless home network. I would like you to follow the steps below:

  Please start here: convert from a connected printer USB wireless

  You are now connected to your wireless network? Please let me know the results, I'll watch for your reply.

  Thank you