CP1518ni on Win7 64 bit does not print unless that ' ignore the ' is on

Similar Questions

• Does not print unless I refresh the web page of the printer

  Photosmart Premium CN503A with iMac OS 10.7.2.  Driver deleted and reinstalled through system preferences > print and scan.  The printer made a kind of upgrade software wireless this week.  (However, the problem before this event).

  The printer, close the iMac and the router does not work for print orders.   The print queue log shows that the printer is connected, but the jobs do not print.  Finally, without printing, the connection returns to idle.  I can get the printer to answer by clicking printer setup > Show printer web page.   Stop the printer and I must refresh the web page several times before the printer has finally complete the work.

  I am very disappointed by this printer.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Color Laserjet 4700n does not print unless you press the button "Refresh" on the printer...

  Hello

  Trying to support a printer down in our Australian Branch, so I can't see the printer, what users say just.  This problem occurs for everyone down in this office (about 20 users).

  It is connect via LAN to everyone and it does not seem printer for everyone until they go up to the printer and press the button "Refresh" on the printer itself.  It's a HP 4700n color jaserjet printer.  I got them to recycle the power on the printer leave unplugged for about 5 minutes and also tried to reset service print spooler on a user's computer and the server, but none of these options helped.  I also tried to remove and time the printer to a computer to users, but that did not help either.

  Any suggestions?

  Thank you!

  Hi, thanks to send additional information.  It really helped.

  The following is taken from the User Guide which can be found here:

  http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=473038&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00366053%2Fc00366053.pdf

  The message that users see is a Media fast charge.

  On Page 198, there is a section on the message they see.  It also includes measures to address the message.

  

  It is likely that the tray is already loaded with media of the letter otherwise, they would get another error after pressing the button to check twice.  However, media guides are very likely out of position and causing the printer to think that the letter is not loaded.

  For step 2 to verify the media guides see page 97: "setting up trays of food.

  When you load paper into tray 2 and have the media guides correctly aligned, after the closing of the tray of the printer, you should see a prompt saying that plain letter was loaded in tray 2.  This prompt is to change the type, size is automatically detected by the tray.  You see a different size than the letter when the tray is closed, which means that the guides are not good position and should be adjusted.

  You can also check which think that the printer is loaded by accessing the paper handling menu as described on page 98.

  Once you have the printer thinking that plain letter is installed in tray 2, the jobs of users requesting letter tray 2 should not more the prompt.

  What happens if you check that the guides are in the right position, but you don't always get a letter in the status bar?  It is an indication that the size of detection does not work correctly.

  Check the guide position tray holder should solve the problem. It may have been moved from its position when the new document has been loaded.  If this does not resolve the problem, please after return.  Let me know the size of the media and type that the printer thinks is in tray 2, the driver that you are using as well as the driver for the work of the user settings.  This will allow me to try additional things at the office.

  (Edited to remove extra lines)

• HP G60-126NR: laptop does not start unless that removed the CMOS battery

  I have a HP G60-126NR laptop. One day she was cold stone when I press the power button / stop. I unloaded the mothboard.  I then installed a new CMOS battery. I use the power supply to the power supply adapter. When I press the power button, I get nothing toally dead, except to show the light of connection. If I remove the CMOS battery, then discharge the motherboard again, then plug in, and the portable lights without power button / stop touching and goes into the Configuration screen to access in time. After time, it starts in Windows without a problem. SFC Windows scan shows no errors. If I stop, not sleep, the laptop died again unless I dump the motherboard and start from the square. In addition, I would like to say that when Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite change 'what happens when I close the lid. My diagnosis tells me that it needs a new motherboard.

  PS: I flashed the BIOS off HP site thinking that it would solve my problem, but it has not...

  The problem has been resolved. The jury of ciruit combination touch pad for power and WiFi was broken and has been replaced. Normal unit operation.

• Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  the printer is not the shades of grey even print cartridge is not yet empty

  y at - it software for hauler color printing?

  Thanks for your comments

  Hello Nilsvolkel,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience and time.

  Do not require any special software.

  However, you can use the steps in the following articles and check.
  Reference:
  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

  http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

  Please keep us informed.

  Thank you

• I want to install my photoshop 5.0 but limited edition pc screens, I have to check if it is a 32-bit or 64-bit application. I changed my windows XP to win7 64-bit operating system (I think that's the problem) how can I use my photoshop on this system?

  I want to install my photoshop 5.0 but limited edition pc screens, I have to check if it is a 32-bit or 64-bit application. I changed my windows XP to win7 64-bit operating system (I think that's the problem) how to install and run my photoshop 5.0 the on this system?

  It is no longer available via adobe and if buy you it to someone else, that you will probably have problems running.  I think that it is compatible with win 98 but I don't know if it's available for you using compatibility mode.

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• HP 8150 printer does not print error: Re-installing the printer, unplug the USB and power and re-boot do not solve the problem

  Original title: hade 8150 printer does not print

  Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) you use a network printer or local?

  I suggest you try the steps below and check if it helps

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is helpful

• Kodak in a 2150 does not print wireless. compatible with the usb cable. Help

  My printer prints not my lap top. It works already. I uninstalled the program and reinstalled and it still does not print. I turned off the printer for a minute and I turned my router for a minute and they turned back. I don't know what else to do. Help, please.

  See if it helps:

  Lost on printer all-in-one Wi - Fi
  http://support.en.kodak.com/app/answers/detail/A_ID/2741/selected/true

  The guests to answer and follow the troubleshooting.

• PHOTOSMART HP 6520 does not print black. And the ink levels estimated for the other inks are not correct.

  Hi, I bought my photosmart Hp 6520 year last, October. But it is no more print black after replacing ink twice. I tried to clean the print head with water and tried "clean print head" in tools, does not solve the problem...

  What is wired is that I bought 4 new 564 inks the hp of the target 2 days ago, printed only less than 10 pages to see if the problem is resolved. Then my printer told me that the cartridge is too low... Is this possible?

  It makes me crazy now... What is even worse, I used a tool to detect my printer, and he said that is no longer under warranty... But he was only 9 months... How can I solve this problem? Thank you.

  The document here can help solve the black does not print on your Photosmart 6520.  Be sure to check the vents, as on the three solution.

  If this does not resolve the issue I suggest you call HP (1-800-HPINVENt to the United States, see here for details by the way).  The warranty online tool is an estimate, they will have a process of updated the status of the guarantee if necessary.

• I have an EpsonRX420 it will copy but does not print after that I inserted a new crtridge of ink

  I have an Epson RX420 and inserted a new ink cartridge after what I coud copy but not print

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• CC of Dreamweaver on Win7 64-bit does not open

  Since 29 January CC Dreamweaver does not (Win 7 64 bit).  The start screen appears and the program never opens.  Any ideas?

  The first thing to try in this case is reset preferences: unusual behavior in Adobe Dreamweaver? Try restoring preferences..

  If you can't get there, try removing the cache file: removing a corrupt cache file. It would also be necessary to remove your personal configuration file. Details of how to find the configuration file are in the FAQ as well as deleting a file cache corrupt.

• Printer does not print it wwants to the fax.

  I'm going crazy because of my actions of printers. Each time, after loading the info from pre-press, I click on PRINT, and instead to print, I get the prompt to SEND a FAX.  I use Windows XP Prof  I am 81 and the days pass quickly.  Can you help me?

  Spundojb,

  Welcome to the HP Forum.

  Try this:

  Click Start > Control Panel >

  On the control panel > click on Printers and other peripherals > click on Printers and faxes

  When open the printers and faxes >

  Right click on your printer (don't forget to choose the printer and not the fax printer) >

  Select (in the little menu) set as the default printer

  That may be enough to solve the problem - it will set your default printer instead of the part 'fax' from the printer.

  ============================================================================

  Continue only if necessary here...

  If this does not work, the problem is maybe that the printer software is not installed, OR that the software of the printer no longer works correctly.  Whatever it is, you can search for the software and try to reinstall to fix the problem.

  The process to install the printing software is not difficult - the installer does most of the work - I've included instructions below.  You must know your printer model to be able to get the software.

  General instructions to install the complete software of the printer features

  ·         Open drivers HP & downloads

  ·         Enter your printer model information

  ·         Select your printer in the list of the 'results '.

  ·         Enter your operating system from the menu drop-down

  ·         Click NEXT and scroll down

  ·         Find the category driver - software product installation

  ·         Select the base driver, e-print, or a full features software

  ·         Save the *.exe installation package (s) on your computer

  Likely to save the file to your "folder"downloads. "

  If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  ·         If you have control of "Admin", you can "double-click" to install the software, if not right click, select run as administrator and install.

  NOTES:

  ·          Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software.

  ·          Scroll down the list of videos back until you find the video that best fits your situation.

  ·         Connection USB: download and install the driver software before connecting a USB cable.

  ·         Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.

  ·         After the initial installation is complete and functional, install the relevant updates - check Category - updated

  There is valuable information about the Web site, including manuals, pages, solving problems, and SOLUTIONS to problems, How-to's and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  ==========================================================================

  NOTE:

  There is no guarantee that the software of the printer is always available for XP - it is worth looking for.  If you find the software of the printer, it may be a good idea to download the software to your computer even if you decide that you don't need to install the software now.  You may need to install the package later and it's good to get it ready.

  Click on the Thumbs-Up Kudos to testify and say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

  All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

  Hello

  Check with the manufacturer of the printer for updated drivers, support and Forums for
  known issues.

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  If there is that no Windows 7 drivers try the Vista drivers if those that exist.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  ===============================

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with your support and the Forums printer manufacturer.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - devices and printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">