CPU 100% used when using IE 8

Similar Questions

• A CPU 100% used by the core - System Idle shows nearly 100%

  Almost every day after execution, for several hours, my computer will slow down to where Visual Studio is almost unusable. When I go to the Task Manager, it shows one CPU maxed out. When I go to the process tab it shows that System Idle Process is anywhere from 87 to 94%. When I turn the Show kernel times a CPU becomes completely red. When I go to the overview of the resources there is no activity for page memory faults, no network activity and very little disc activity (0 KB/s up to 5 = 48 KB / s). Any idea of what is causing all my cpu to be gnawed by the kernel? Is it possible to find out more details on what process kernel does this?

  Thanks for all the great links, I don't know that I'll use them in the future.  However, even if I had no proof, I decided to replace the hard drive. I cloned the existing hard drive (so all the problems of software remains the same) and the problem is now gone.

  Tod

• CPU 100% used

  Hello

  How to reduce the use of the processor that is currently used about 100%?

  Memory size is 23 GB

  OS - Linux 5.11

  Two databases exist on this server.

  Oracle - 10.2.0.4.0

  Kind regards

  Bala

  I think in your database it datapump job is running--check for this...

• Manager tasks shows my CPU 100% usage but when I go to the process tab only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%

  Original title: Task Manager

  Manager tasks shows my CPU 100% usage but when I go to the processes tab and sort by CPU usage there are only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%.  What else is using my system resources that is not displayed by the Task Manager?

  Click Show processes from all users . There may be other systemic processes and processes that run under other accounts.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• HP 15 Notebook PC TS: Freezing, blue screens and 100% use of the disk.

  I constantly freeze because of my pc is always 100% use of the disk. Due to the use of disk, it causes my laptop to a blue screen, I received the following information from the configuration of the system errors: Bad, kernal error in the data on the page, out of State driver. When the 100% disk usage, I use about 1 mb of space.
  I use a wireless internet connection.
   
  Before these problems have taken place that I had upgraded to windows 10, shortly after the use of disc started to go up more often eventually cause my laptop to blue screen. With the bsod, it says that my operating system could not be found, so I had to go back to windows 8 through factory reset. With my first boot on my factory reset, I was still having the same problem as before, but since then my errors and problems continue to increase.
  I hope to diagnose my problem and get help before it's too late.

  Hi Zinchy,

  Thank you for the update. Yes, you can run a test lying on the hard drive from the BIOS. Here is a link to guide you.  HP Notebook PC - hardware failures (10, 8 Windows) screening  If the hard drive test OK, I'll try the clean install of Windows 10. Please hold me.

• I was just wondering if raising the Task Manager causes a spike in CPU percentage used? What is the normal percentage?

  I was just wondering if raising the Task Manager causes a spike in CPU percentage used? What is the normal percentage?

  Original title: percentage of CPU

  ASJ

  I guess it depends what you mean by 'raising '.  If the Task Manager is running minimized and you maximize there should be virtually no effect.  If you ask any Manager launch tasks can be a brief rally in cpu, memory, and HD activity, but he should be back almost immediately where he was, the slight increase depends on your specifications of the system and other factors.

  Is there a reason you ask?

  

• Windows 8 guard slows to grip and 100% use of the disk.

  original title: upgrade to WINDOWS 8 PRO - system crashes - no Resposnive

  I had recently upgraded family basic form win7 Windows pro. My laptop does is VPCEH15EN from Sony. By Download Upgrade Assistant I had updated. The 1st time, my system became dead slow. After reboot, I found that my use of the disk is 100% all the time. With very little knowledge I had killed some of the background process that I know (and also a few random apps) use of disck came dowm. Here begins another problem. Am not able to uninstall, open Task Manager, change some settings etc... Can help. I have 8 GB of ram, processor i3, 64-bit

  Hello

  I had this same problem, my computer laptop lenovo would remain idle for about 15 minutes, then go back, 100% use of the drive, but not the tag to any process.

  It was a scheduled defragmentation task.

  Task Scheduler open-> Microsoft-> Windows-> Defrag

  Disable or delete the task.

  Hope this helps someone else.

  I thought it was drive problem hard as the computer would be useless without restart using the power button.

• Trial license - 100% used?

  Hello

  We have Volumes App trial license which remained 10/10 users 100% used for about a month now. This means that we cannot assign ANY app users volumes even if we completely unassigned all volumes to users.

  Evaluation license is VMware App Volumes v2.9 applied EULA Eval License (app_volumes_license.key).

  He said 10 out of 10 used under users.

  Under the tab "Volumes", if I cancel all "affected" and "in use" apps, the use is still 100%.

  Can someone can enlighten as to how can I reset this use?

  It is a model of user license, the user model not simultaneous.

  My guess is that you must post VMWare if it is possible to remove users from the license. Once a user logs in, it picks up a license.

  You could just reinstall the Manager, overwrite the database and import all the appstacks subsequently. Licenses are then eliminated.

• Windows 7 Ultimate CPU 100% randomly

  Hi, like some people, I have problems with the CPU, it goes to 100% randomly, when I opened Task Manager fast, to see what procces is the cause, I see random, example system - Cpu 40, Task manager cpu google.exe 20, 60 etc. etc.

  Task Manager, one is ttricky, if you finish her then closes the Task Manager, and then I do not see how its procces do the high cpu

  I already checked the disk for errors, used ccleaner, defragement, boost clean, optimized windowws for better performance, drivers updated and checked for dust inside the laptop, but still its happens

  yesterday I did chkdsk with cmd and it was better, in any game when cpu going 100, fps drops to 8-9, after chkdsk, when cpu down, fps went to 20-25, which is playable and even better than 8 VPS, well, then I went to the BIOS and default settings selected, but then he started as before

  If you need more information then just ask me

  Thanks for reading

  EDIT:

  Here's a look when cpu goes 100

  http://prntscr.com/3ocffx

  Before chrome became all the cpu, I shut chrome and then explore used 51% and 36% of system

  more: 3 I turned off Intell speed step technology to the BIOS and everything works fine now, I can't believe I fixed it

  even if I installed windows again once it won't be fixed right?

• First CC2015.0.1 crashes quickly transport through sequences ProRes (@CPU 100%)

  Hello-

  After updated in CC2015 (and the other a.0.1), I noticed that the first is a lot less stable.

  I actually managed to isolate the behavior when I would be transported quickly through sequences (using keys JKL accelerate up to max speed.)  After being at maximum speed and then to wait a bit for first to sort of "dragging" (generally through 1 + minutes of footage) and first would break.  This does NOT happen quickly rubbing through the images.

  I was able to reproduce this problem with a NEW PrPro project that was started in 2015.  I was able to reproduce the issue with the wrapped .mov files created by the two Final Cut ProRes / compressor as well as files created by Atomos Ninja ProRes.  The way back to PPro CC2014, I confirmed that this problem was not present.  I was not able to reproduce this problem with other types of images (even though I only tried with H.264, DNxHD and DNxHR.)

  Also, I look at my system specs while rubbing, when my CPU 100% usage was when she would crash in CC2015.  With the help of CC2014 rub through the same images, that it could peak around 70-80%.

  Also looking at the HDs system resources never more than 50%, GPU no more than 10% and I am 12 years old and + GB of ram to spare.

  All my OS and GPU patches and updates are installed.  My specs are below:

  Intel Xeon W3565 3.2 GHz CPU

  24 GB Ram

  nVidia GTX 980 TI

  All the updates of Windows 8.1, run

  OS / Apps on SSD

  Project (ProRes images) on hard disk 7200 RPM external connected via SATA internal

  Cover media on separate 1 TB 7200 RPM drive working.

  Hi Ryan,

  First Pro CC 2015.0.2 update (9.0.2) to solve this problem. Sorry for the waiting and inconvenience.

  Thank you
  Kevin

• Why my poster Task Manager my CPU 100% busy so no or few applications is running?

  Why my poster Task Manager my CPU 100% busy so no or few applications is running? In particular the process explorer.exe (the OS) occupies CPU resourses.

  Thank you very much

  Angelo

  Hello

  Thank you for your kind reply.

  My answers to your questions:

  1 processor: Intel Core 2 CPU 4300 1.80 GHz

  2. RAM: 2.00 GB

  3 OS architecture: 32-bit

  4. OS version: Windows 7 Ultimate SP1 (V6.1.7601)

  As I said before, CPU usage was 100% even if no demand had started. The operating system (explorer.exe) used about 60% of the CPU.

  Microsoft Security Essentials has not helped.

  In the meantime, I found a solution. After using restore system several times (not only one!), I managed to get my normal working conditions in return.

  Problem solved, thanks again!

  Best regards

  Angelo

  (Genoa, Italy)

• CPU 100%

  Why my pc says sometimes 100% cpu in use, please help me I have a HP Pavilion a1340n

  It is of symbolizing very of a virus. Or maybe you are graphic riunning high several programs at the same time or you do not have enough RAM for your needs. My bet is on the virus.

• CPU 100% busy

  CPU 100% busy, windows xp.

  I opened an email in my yahoo page. The object of the dispute has been called HELLO.

  There was a hyperlink in the text; I didn't click on it.

  Since then, felt this slowdown of my PC.

  Grateful if someone could advice.

  PKM.

  Hi, PKM,.
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Use Windows 7 CPU to 100% only when it is plugged

  I post this topic only because my problem is quiet unusual. I found hundreds of topics related to 100% CPU usage in Windows 7, but none of them was related to this over-consumption of the processor during the charging of the battery. There is also a situation that 100% of CPU usage occurs while working on the battery, but my case is completely the opposite.

  Windows 7 x 64 prof. system goes to 100% CPU use occasionally and it becomes impossible to work. then all of a sudden, the problem goes away and everything works right. After a few days of work without problem the problem returns and so on. I did the fresh install several times and the problem appeared immediately after the installation of the system every time. Finally, I discovered, that it lasts only when the charger is plugged in when you are working on the battery, everything works correctly. pluggng immediately after the CPU reaches 100% usage and so on.

  laptop HP Compaq 6710 b, Windows 7 x 64-teacher system.

  Help!

  Hello once again, Andre. Thank you for helping me. I tried to find such a framework (high precision event Timer) in my BIOS, but I did not: it seems to be fixed on my laptop. However, I found it in my Windows Device Manager and I have disabled HPET here, but it did not help in any case - there is no change in the use of the CPU (always 100%).

  BUT - I found an effective solution on my own! The thing was very simple - it was the fault of my power cord to the AC adapter / CC. I tried my colleague adapter and CPU usage dropped sharply to 5-10% on idle. Then I plugged my power adapter - use has exploded to 100%, and again, I used my colleague adapter - use declined.

  THE REASON FOR THE HIGH IN MY CASE CPU USAGE WAS DEFECTIVE AC ADAPTER

  It was a big surprise for me, because the problem occurred only from time to time. Apart from this, the laptop work properly. I tried hundreds of things, including the reinstallation of the system 3 times, change a hard drive (which seemed to make some strange sounds), my memory test, install the latest drivers from HP, change settings loading, etc. Only after buying a new battery (the old one was not operation at all) I noticed that the problem goes away after unplugging the AC adapter.

  I lost a lot of time trying to solve this problem and it was very frustrating, I also found that a lot of people have similar problems, so if you, dear reader, have 100% CPU use problem, unplugg your power adapter first know, that it's abandoned.

• CPU at 100% use, services.exe using 50 to 70% +.

  I've upgraded from Vista to Win 7 on day of release and had no problems until recently. In recent days, my CPU usage will boost 100% at irregular intervals and stay there for a long period of time. When I check the Task Manager and view the processes from all users, services.exe is fluctuating, anywhere from the low 50 to 70% in low use. When the computer works normally, services.exe is close to the high single digit. I uninstalled and programs that I installed immediately before the occurrence of the problem (and it happens again as I type this) and I ran full virus/malware using Microsoft Security Essentials scans and the scanner online ESET. Both are some adware stuff and not withdrawn, but no virus or malware problems. This happened for several days and made my computer almost unusable, and I'm in a fix what to do or where to look next. I hate for resettlement because the original installation was so recent, if all the tips I can try to avoid again would be great. Thank you!

  Expand the tree until you see other things, not only ntdll.dll! _RtlUserThreadStart.

  NDIS.sys means, you should try to update your drivers LAN (W). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/