CPU dead?

Short of history, close my laptop, HP pavilion 1a30us g6, down last night. Went to use this morning and got a black screen with the flashing caps lock. Checked the HP and determined that the CPU has failed because the led flashes once, going off for three seconds and then blinks once more to repeat the sequence. I have the knowledge and the means to replace the CPU on mine, I just need to make SURE that it is the CPU and not the motherboard failed. How can I be sure?

MaverickX84 wrote:
Well, next question. I have an AMD Athlon II P360 inside. Any chance I can move the processor to something more powerful as long as I stay within the socket S1G4 class? Nothing is too big, just maybe jump to the Turion II 520. Same price, more speed. Thoughts?

Try this manual: everything is there...

http://h10032.www1.HP.com/CTG/manual/c02770268.PDF

Tags: Notebooks

Similar Questions

  • CPU is dead now, I need to install Photoshop and lightroom on a laptop?

    I have photoshop and lightroom install on a laptop and a desktop through the creative cloud. Last week my laptop had a failure or a failure of the CPU motherboard. Anyway its dead. I can get my pictures on the hard drive, but now I want to move the photoshop and lightroom for my laptop to marry while I decide what to do on a new machine. After I bought a new machine then I will suggest two programs to it. My question is how can I move my subscription for a new machine because the old is dead?

    According to my understanding, you only need to install the cloud on the new machine and sign in using your account id/code.  This should close autonatically of other activations you have.  You can then connect to the desktop again.

  • HP Pavilion DV6-6110us: dead computer - CPU problem?

    This computer is a HP Pavilion DV6 that no longer works.  The caps lock flashes and the wireless light turns orange.

    The 'professional' consultation, we said that the video processor was not seated properly on the motherboard and that they could try a sort of re-flow by the firing chamber and replace the video to see CPU, moment of dismantling, there is no piece where it is supposed to be (must be somewhere else).

    In addition, after searching for flashing caps on the web lock, I discovered that there are several indicators which transmits this signal, and after reviewing the table, it seems that the boss of flashing light indicates that the cpu has failed.

    So, at this point, I plan to replace the cpu. Any ideas on what are the best and/or most affordable options? Also is there advice and / or tricks I should know when you perform this repair?

    Thanks for any help that anyone can provide.

    The diagnosis following your fake is... It is a sign of chess chess not CPU GPU. Most users think that it is the CPU and it is not. Your video Chipset has failed, and unless you get this replaced chipset or buy a replacement with the failure of video chipset motherboard fixed replacement CPU will not fix your problem. It is a GPU failure and looking for your system has AMD GPU and very probably, it was not and must be replaced. Of course they are not professional if they do not notice that there no video chipset. Video HD Intel and Intel CPU rarely fail why because if that were the case you would hear of such failures, news bulletins, but you do not have. Options at the moment are

    1. replace the Board of directors by Council renovated with chipset failure set

    2. sell your system and get a better system that does not breakdown video chipset

  • Mother dead CPU - windows OEM card 7

    Hello

    My motherboard and processor just died. Now unfortunately the same motherboard and processor is no longer available.  I found one with the same socket and chips, and well, just by ASUS insteado of MS I.  Everything else is the same. I talked to MS, and they said that my product key has been good and I could reactivate. And if I have problems I should call them. I'm good to go?

    Thank you

    Try the phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Firefox using a lot of CPU (90% + sometimes)

    I use firefox version 26.0 on a Macbook Pro OS X 10.6.8 version and I run these http://i.imgur.com/Co4NlGQ.png and http://i.imgur.com/Co4NlGQ.png extensions. I'm also using these plugins http://i.imgur.com/ZO55Lmq and http://i.imgur.com/IapcvJY and I have disabled all plugins, and which has not helped because the CPU usage always fluctuated close to 10% all the way up to 100% usage.

    I checked to see if the plugins are up to date and I updated one of them, but the most recent update of Java Applet Plugin works only with Maverick, which I did not. QuickTime said it is not up-to-date, but when I checked the software update on my Mac, it says there is no update available.

    Image of the plugins I checked to see if they were updated http://i.imgur.com/fPuV8vD and http://i.imgur.com/7Uwp5vX and http://i.imgur.com/N0Cz9Tp http://i.imgur.com/6FIwVTv aaand.

    Here is a picture of my activity monitor (I got all plugins disabled here) http://i.imgur.com/j6xUudo . As you can see, the CPU usage is 99.6%, which is huge given only, I opened a webpage (reddit) and was not running videos and others. And here's a picture of my activity with more information http://imgur.com/zuY5iMu monitor. The real Mem can go all the way up to 2 GB, which is a bit worrying.

    I tried to reset Firefox, which did not help, I tried from FF in safe mode, which did not help, and I even tried to reinstall FF, that did not help. I also tried disabling "using hardware acceleration", restarted my computer, and the issue was not fixed. I used CCleaner to clear temporary files and other, but it won't do any good.

    I really want to be able to use Firefox, because I'm starting to be wary of Chrome, but if FF only use a lot of memory and CPU, I'm not sure that I can continue to use this browser.

    I feel I hit dead ends on everything I tried, so I'm starting to lose hope. Did someone help any idea or suggestion as to what I should try / do?

    I have never seen that, perhaps, simply a reset will fix all the problems.

    NOTE that RESET WILL NOT:

    • Delete bookmarks, saved passwords, Form Data, history, tabs open (if you use Firefox 25 and more).

    A discount to ZERO will BE:

    • Delete the Addons, Custom Prefs, Configurations of toolbar, search engine settings

    More on reset (and how to achieve it) can be found here.

    If you want to be safer, you can save your profile (its likely will not be necessary)

  • HP Envy 17 t - 3200 CTO: malfunction of the system equipment preventing startup. What material is dead?

    Got a HP Envy 17 3200 CTO LOADED at the time. Quad core, Radeon HD 7850M, etc.

    Well the other day something blue screened but froze during this process and seeds of graphs in this screen. Corruption and blocks appeared and disappeared. I was forced to close during the blue screen as something bigger was not working for the crash dump process, it stood at 0%.

    To restart the device display lights, and no noises are made beeps indicating a problem. The Bluray makes his usual preparation sounds it does every time you start upward. He's sitting with a white screen which seems not even to be turned on. The only other indicator is the key caps lock flashes several times and turns off, then blinks several times and turns off, repeating this sitting here...

    What part is probably dead on this sucker? CPU? DRAM? Motherboard? Graphics card? How badly can I turn if he doesn't...

    While he sits there, various lights keyboard are on as said... Caps lock flashing.
    Power LIGHT on. In my view, that the wireless light too... The light HP envy on the hood is also on...

    Come here to get advice because I do auto repair. No guarantee. I'll buy the requested Party and auto install like I always do for my laptop.

    Hi @woggles,

    Thanks for posting HP forums!

    I read your post and wanted to help.

    I understand that your laptop has crashed with blue screen, and after the forced shutdown, it starts with the white screen and some LEDs + flashing.

    You can check the link for the LED codes: HP - computer laptops does not start and Emits a LED or beep Code

    It is best to follow the steps on this link: HP Notebook PC - computer won't start (Windows 10)

    Let me know how it goes.

    If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • Satellite X 200 PSPBUA - no power, no lights, dead!

    Hello

    I don't know if anyone can help, but about 2 weeks ago my laptop died, just turned off.
    There is NO lights at all, and nothing happens when you press the "on" button

    There is 19,42 volts, measured on the motherboard of the adapter.
    I replaced the battery and motherboard and it remains dead.

    I removed the disks and memory and the optical drive - still dead.

    Any help to restore this laptop great would be appreciated

    Thank you Ray - aka mihd

    > I have replaced the battery and the motherboard and it remains dead.

    Are you sure that the new motherboard is ok?
    There is not a lot of parts that may be affected: motherboard, CPU or RAM
    If one of these parts is faulty, the laptop will not light.
    But usually the power light flashes even if the CPU or memory would be dysfunctional.

    In my opinion this motherboard problem, but who knows without a hardware check the person cannot say exactly what could be wrong here.

  • Four edition of ENVY 17 t-j000: REPKLACING FAN DEAD

    the laptop fan is dead and I have another to replace it.  How to Bay fan, do I approach the bottom of the battery or do I have to go through the top behind the keyboard

    Come the background:

    Repair manuals

    See pp. 85 and many procedures leading to it. You have one of the most complex and most involved laptop disassembly projects there on your hands. Good news, you don't need to remove the motherboard but I remove and clean the radiator and apply the new Paste on the cpu while you're there.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Solve problems through satellite S1900-203 - CPU

    Hi guys,.

    I had trouble with my old Toshiba Satellite 1900 and I followed the instructions found on the web to solve:

    [http://blog.myspace.com/index.cfm?fuseaction=blog.view&friendID=47737756&b logID = 189326100]

    I think that the main problem was the cooling fan, so I removed the batteries and opened the box of the cpu. I removed the 4 screws to remove the heater box, but with, he's the whole processor (he was attached to the cooling area). I cleaned the dust and put the drug in his place, but now my computer no longer works (only the fan works, but the screen is black and nothing happens).
    Can you help me?

    ALE

    Hello Ale

    I'm afraid that your laptop is dead now. I am not a technician, but what is missing is the grease between the CPU and the cooling module. I'm really afraid that the CPU is grilled.

  • Satellite 4030cdt dead

    I'd appreciate advice for my dead satellite 4030cdt, it is totally dead no response from all power button, power supply works fine the main battery and battery cmos have a little tension on them, I disassembled the laptop right and checked all the connections, 15v DC is present on the motherboards power socket all internal fuses, I can see were buzzes on, the fault I would say is related to the power and I was wondering if there was some known defects of power with this model, I don't really want to bin this piece much honey Kit and everything I buy spare parts could be expensive if I buy by mistake also nobody knows if the laptop must behave normally with battery removed because it would be the most obvious fault.

    Sorry if it was all a bit much to start with, but I'm scratching my head on this one, any suggestions greatly appreciated

    Hello

    Unfortunately, it is not easy to say what's wrong on your laptop.
    If the adapter works properly so I guess there must be something wrong with the motherboard or the CPU.
    In this case, you should contact Toshiba service because it can start a diagnostic test and can give you a precise answer on the fault.

    Subject of the battery: Yes, you can use your laptop without the battery if the power adapter is plugged. It s advisable to remove the battery if you use Notepad with AC adapter / CC.

  • Satellite A500-1DN (PSAR3E) - Dead BIOS after flashing

    Hi all.
    First of all, sorry for my English.

    My problem is simple, I have a bios dead after flashing Toshiba service station (or something like that).

    How it happened? : 4 days ago, it asked me to update. It was for me quite normal because she asked for updates on a daily basis. I enablished day and after a few cliks on button then I noticed it has been updated to BIOS and is almost in half. I wanted to wait to the end (because I know if I stop uptade of bios, I end up with dead bios (bios corrupted)) but collapsed almost at the end and he showed me a few errors. After that my laptop did a restart and I couldn't stop it. He died.

    Now, if I push the power button / stop I get a screen black (as it is off) som LED turns on and the Cpu fan to perhaps 10%.

    What I did the last 3 days? : I searched all the residents on what to do with it. I tried maybe 10 types out crisdisks with usb and CD (with floppy isn't becose Bios for my laptop is too big for 1 floopy).
    I tried to start with FN + B this has worked for me CD player began to search for CDs, USB key showed activity, but dead end happened nothing. I tried to make the Boot usb with the latest minidos.sys and phlash16.exe. I tried to combinate but still nothing.
    I tried everything I found on internet forums around. Nothing helps.
    Another thing is that only bios I found was 1.90. If anyone has an older bios for my laptop pls give me a link. I'm losing hope becose I can not find anithing on google.
    I am an advenced user I almost did this medication with the pc, but I've never worked with dead bios.

    Pls someone help me and give me a correct crisdisk for my model. Or another sugestion.

    Hello

    Sorry, mate, but you should contact the http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ ASP.

    Unfortunately, the warranty does not cover failure of the bios and you will have to pay about US $ 50-60 (anyway, it costs like that in my service center)

  • I have a compaq presario sr19090uk desktop pc, and the motherboard was dead. :(

    I have a compaq presario sr19090uk desktop pc running windows 7 64-bit with a card mother micro-ATX (ASUS - A8M2N - LA / Nodus M-GL8E) Socket AM2, Anthlon 64 3500 + socket 939and the motherboard was dead. What is a good replacement that takes in charge a cd/dvd ide burner and sata hard drive for undeer £100. I have also 4 GB DDR2 SDRAM installed.

    Thank you

    Tony

    Here are the specifications of your Compaq Presario SR1909UK desktop and it is card mother A8M2N-(NodusM). There is a conflict in the two specifications for what CPU socket is actually used. The computer specifications claim a socket 939 CPU, while the motherboard plug State she has a socket AM2. You will need to examine your system to confirm what type of CPU and socket he did.

    It can be difficult to locate a market after motherboard that will meet your needs as AM2 socket 939 about 5 years to 8 years and are several obsolete generation. Check e - Bay or similar in your area for a replacement card which meets you the specifications. Please keep in mind is likely to replace the HP OEM Board on your computer Windows become a "non-genuine" and require the purchase of a new operating system. Note that the recovery discs you created will not be also usable on your computer.

  • Satellite Pro L40 with a motherboard dead

    Hello

    I have a L40 Pro of the Satellite with a dead motherboard.
    I just got a second hand one out of ebay, who was supposed to work.

    I connected the components of the etc., heat sink, processor, old wireless card.
    When I turn it on the led and the processor fan runs but the screen is blank.
    I have attached a monitor external, same thing.

    So what I'm asking is, if the processor has been fried, what will happen or would it boot in the BIOS at least?
    I bought a dead motherboard?

    Hello

    In my view it is difficult to say what is the reason. A friend of me also bought a second hand motherboard on eBay that didn't t work
    But theoretically it could also be a problem with your CPU. Who knows?

    I think that the best option would be in contact with an authorized service provider. Why? The guys were professional diagnostic tools to check your laptop. In addition you can get all the spare parts for your laptop.

    Here is a list of them:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good luck! :)

  • MacBook pro 13-inch el capitan always show the Rainbow of dead ball

    Right now I'm using Macbook Air 13 inch mid 2012

    I have once again updated my iphone 4 ios s 8.0.2 to 9.1.2 using my mac and I left the mac update this throughout the night

    But tomorrow after I tried to run my mac, it turns very slow and I finally discovered that my mac always show the Rainbow ball dead once that he "freeze" or "hangs." I have a problem when I run any application, try to press one of the sound, light, stop buttons in the row or even write something about the spotlight

    I tried several thing to get my mac

    (1.) I tried to stop the do not respond forcefully quit

    2.) open the activity monitor and try to leave the app consuming so much memory or running % CPU

    3.) doing repair disk

    4.) close with force the mac by pressing the power button

    5.) try to restart using the command + alt + shift + power button / stop or command + R + power button front for my mac to turn on (and another way to turn on the mac I don't remember really

    6.) download the application "CleanMyMac3" and clear about 100 GB of data

    7.) I also check my hard drive internal and I know I have still 250 gb of my memory of free space

    Anyone has idea what should I do to make my normal Mac turn? I need quick answer as soon as possible

    First, you must uninstall CleanMyMac.  This program is bad, bad news.  It's the fraudulent crapware, I can be honest.  You should never, never, never download any program 3rd party to remove anything from your computer, sight unseen.  You do not know which files were contained in this 100 GB, and that's what makes it dangerous.  Your computer has been damaged, well beyond what was he runs everything until you did.  Mac do not need software 'maintenance' that claims to clean, organize, update or optimize it.  They do a great job of taking care of themselves, to the extent where that goes.  So, until the problems you encounter may be addressed, you need to uninstall completely in accordance with the instructions of the developer.  You can find them here.  Do exactly what these directions say to do.  If you do not, you will need to reinstall to uninstall correctly.

    Once you take care of it, go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.

  • HP Pavilion Notebook - V2Z46AV: can I upgrade my CPU in a HP Pavilion 17?

    I have a feeling that this 6300hq of 2.3 GHz i5 is not going to get me very far.  I was wondering if my specific model has been upgraded and if so, what processor I could install.  I did work on my old Pavilion 15, the replacement of the CPU and RAM, so I think that I am able to upgrade myself.

    In addition, my CPU is bottlenecking my GPU, that is a problem that I use the laptop for games.  I currently have the GTX 960 m 2 GB, if you think I'm wrong.

    The manual is enigmatic at best but if you have read and worked with some of them and made a swap processor or 2, it is obvious that the CPU is soldered to the motherboard. Dead giveaway: no lising processor as spare part. Second gift dead: no image to remove the processor. S. 51 of the manual shows a representation of the fo processor soldered on. 3rd dead... do the replacement motherboard description includes the processor included with Office. See p. 52. The best motherboard with i7 and 4 gig of video memory and Windows 10 is 857389-601

    HP does not have it in stock:

    https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=D3E80C12FAA74A1EBCBE3DEFC4D0100E & Searchin' = partnumber & SearchPN = 857389-601

    Also no luck it find via eBay or amazon.com

    And please do not take on HP representatives this work Board. They are not responsible for the issues you had with Service centers and are just trying to help.

    Good luck.

Maybe you are looking for

  • M1V66UA: problem with recovery media disk drive

    my laptop is HP envy x 360 bought around December 2015(it is still guaranteed). Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk. the pr

  • Skrivare Skriv ut utskrift

    JAG misslyckades med en installation av en HP Laser Jet P1005 naked och det inte att your bort enheten for att gar will install om. I kontrollpanelen, "och skrivare klickar" ligger icons kvar med status 'Tar bort enhet. Det heller inte att gar beats

  • OfficeJet Pro 8500 A909g - black vertical line wireless

    When you use the ADF for the copy or scan I get vertical black line on the right side of the document. This line does not appear when printing or placing the document on the glass. I tried to clean the glass and ADF according to HP instructions (see

  • SAP

    Lost key on Win7Professional that came w / my Acer Aspire Lt, but have software Win7P. I'm looking for the key to this?

  • After the startup Effects CS6 problem

    Hey all,.I was wondering if I can get some help. I just summer buy a new Macbook Pro for work, and had Production Premium CS6 installed on it. Ive started all the apps and they work fine after installation and the Enter key.For After Effects, however