CPU/map change mother fails to start

Similar Questions

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• HP G60 laptop OEM Vista h. Prem startup failed to start Windows. A recent hardware or software change might be the Cause. ... Running in a State of Limited Diagnostic... »

  I have a 4 years old HP G60-235DX computer laptop Vista Home Premium OEM factory installed.  I had been doing the blue screen of death the last 8 months.  On Tuesday afternoon, I ran ChkDsk.  It was taking too long so I hit the power button.  now on startup, a message indicates "Windows Failed To Start."  A recent hardware or software change might be the Cause. "I tried to restore it to 4pmPST (Tuesday 7/2), but he sent the message:"your computer is running In A Limited Diagnostic State.  If you use the system restore in this Limited State, you can't undo the restore operation. "Expert Microsoft at the reception of the answer took me by (attempt), safe mode safe mode with network (failed attempt), last known good configuration (failed attempt).   He said that he needs me to order a HP recovery disk because the Vista system files are corrupted, damaged or missing.   Does this sound correct?  Try to get a good HP # order JUST a recovery disk.   I was the victim of the "have you tried to fix your own computer without HP offers you a recovery disk?   This is what happens when you try to fix it yourself without HP offers you a recovery disk. »

  Thank you.
  Skynet

  Your CV has been provided with a score of hidden restore and HP provided instructions on how to create the recovery disks

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c00809678

  If you know the brand of the hard disk on the system, this disc has a free disk bootable verification utility, if you do not know the Player try to WD's SeaTools

  http://www.Seagate.com/GB/en/support/downloads/SeaTools/

• Integrated WebLogic fails to start after you have added the security provider

  Hello

  I'm new in the adf and weblogic. I use weblogic built-in jdev 12 c 12.1.2.

  I set up the security in my weblogic using this blog.

  http://adfgouravtkiet.blogspot.com/2012/07/Configuring-ADF-security-using-database.html

  It is configured successfully. But after you configure when I restart my weblogic server, it will fail to start. This is stack strace.

  < 16 April 2014 17:46:33 hours CEST > < error > < security > < BEA-090870 > < the domain 'myrealm' could not be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException.

  weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException

  at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:341)

  at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1812)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:447)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:845)

  Truncated. check the log file full stacktrace

  Caused by: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException

  at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)

  at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)

  at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)

  at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)

  at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.NullPointerException

  at weblogic.security.providers.authentication.shared.DBMSUtils.verifyHashAlgorithmUsable(DBMSUtils.java:43)

  at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.validateConfiguration(DBMSSQLAuthenticatorDelegateImpl.java:167)

  to weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl. < init > (DBMSSQLAuthenticatorDelegateImpl.java:77)

  at weblogic.security.providers.authentication.DBMSAuthenticatorDelegateImpl.getInstance(DBMSAuthenticatorDelegateImpl.java:459)

  at weblogic.security.providers.authentication.DBMSSQLAuthenticationProviderImpl.initialize(DBMSSQLAuthenticationProviderImpl.java:55)

  Truncated. check the log file full stacktrace

  >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 16 April 2014 17:46:33 hours CEST > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason:

  There are 1 nested errors:

  weblogic.security.service.SecurityServiceRuntimeException: security services [Security: 090399] not available

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:921)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1058)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:148)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state changed to FAILED. >

  < 16 April 2014 17:46:33 hours CEST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server shuts itself down. >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >

  Stopping Server Derby...

  Derby server stopped.

  Process is complete.

  [End of IntegratedWebLogicServer.]

  SQL authentication is configured using a data source. If I change the name of blind in weblogic in the config.xml file data source, he throws exception but able to start the server. can any body help to what he's trying to find the data source before inilizing it. Here is my file config.xml

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < domain xmlns =" http://xmlns. Oracle.com/WebLogic/Domain "xmlns:sec =" http://xmlns. " Oracle.com/WebLogic/Security "xmlns:wls =" http://xmlns. " Oracle.com/WebLogic/Security/WLS "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " xsi: schemaLocation = " http://xmlns." Oracle.com/WebLogic/Security/XACML http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/oracleas/schema/11/jps/weblogic/providers http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic / security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd' > .

  < name > DefaultDomain < / name >

  field < version > 12.1.2.0.0 < / domain-version >

  > security configuration <

  < name > DefaultDomain < / name >

  < domain >

  < sec: authentication - provider xsi: type = "wls:sql - authenticatorType" >

  db_user < sec: name > < / sec: name >

  < sec: control - flag > SUFFICIENT < / sec: control - flag >

  < wls: data-source-name >workdayDS< / wls: data-source-name >

  < wls:plaintext - passwords-activated > true < / wls:plaintext - passwords-enabled >

  < wls:sql - get-users-Word of past > SELECT PASSWORD FROM WORKDAY_USERS WHERE username =? < / wls:sql - get-users-Word of past >

  < wls:sql - user - exists > SELECT name from USER OF WORKDAY_USERS WHERE username =? < / wls:sql - user - exists >

  < wls:sql - list-members-groups > short_name SELECT OF WORKDAY_user_role_grants g, workday_roles r, workday_users u WHERE g.usr_id = AND g.rle_id = r.id AND u.username u.id =? < / wls:sql - list-members-groups >

  < wls:sql - list-users > SELECT USER FROM WORKDAY_USERS WHERE name LIKE USER name? < / wls:sql - list-users >

  < wls:sql - get-user-description > SELECT DISPLAY_NAME FROM WORKDAY_USERS WHERE username =? < / wls:sql - get-user-description >

  < wls:sql - list-groups > SELECT SHORT_NAME FROM WORKDAY_ROLES WHERE SHORT_NAME AS? < / wls:sql - list-groups >

  < wls:sql - group - exists > SELECT SHORT_NAME WORKDAY_ROLES WHERE SHORT_NAME =? < / wls:sql - group - exists >

  < wls:sql - East-members > SELECT u.username OF WORKDAY_user_role_grants g, WORKDAY_users u WHERE u.id = g.usr_id AND rle_id = (SELECT id FROM WORKDAY_roles WHERE short_name =?) AND usr_id = (SELECT id FROM WORKDAY_users WHERE username =?) < / wls:sql - is-member >

  < wls:sql - get-group-description > SELECT name FROM workday_roles WHERE the short_name =? < / wls:sql - get-group-description >

  < wls:password - algorithm > < / wls:password - algorithm >

  < wls:password - style > PLAINTEXT < / wls:password - style >

  < wls:sql - create-user > INSERT INTO WORKDAY_USERS (USERNAME, PASSWORD, DISPLAY_NAME) VALUES (?,?,?) < / wls:sql - create-user >

  < wls:sql - user-delete > DELETE FROM WORKDAY_USERS WHERE username =? < / wls:sql - remove-user >

  < wls:sql - remove group memberships > DELETE FROM WORKDAY_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) OR usr_id = (SELECT id FROM workday_users WHERE username =?) < / wls:sql - remove group memberships >

  < wls:sql - set-user-description > UPDATE WORKDAY_USERS SET DISPLAY_NAME =? WHERE USERNAME =? < / wls:sql - set-user-description >

  < wls:sql - set-user-word of past > UPDATE WORKDAY_USERS SET PASSWORD =? WHERE USERNAME =? < / wls:sql - set-user-word of past >

  < wls:sql - create group > VALUES INSERT INTO WORKDAY_ROLES (id, short_name, name) (ROLES_SEQ. NEXTVAL,?,?) < / wls:sql - create group >

  < wls:sql - set-group-description > UPDATE workday_roles SET name =? WHERE short_name =? < / wls:sql - set-group-description >

  < wls:sql - Add-Member-to-group > INSERT INTO workday_user_role_grants (id, rle_id, usr_id) VALUES (workday_user_role_grants_seq. NEXTVAL, (SELECT id FROM workday_roles WHERE short_name =?), (SELECT id FROM workday_users WHERE username =?)) < / wls:sql - Add-Member-to-group >

  < wls:sql - remove-member-of-group > DELETE FROM workday_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) AND usr_id = (SELECT id FROM workday_users WHERE username =?) < / wls:sql - remove-member-of-group >

  < wls:sql - group-delete > DELETE FROM WORKDAY_ROLES WHERE short_name =? < / wls:sql - remove group >

  < wls:sql - delete-Group-members > DELETE FROM workday_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) < / wls:sql - remove group member >

  < wls:sql - list-group-members > SELECT username FROM workday_user_role_grants g, workday_roles r, u workday_users WHERE g.usr_id = AND g.rle_id = r.id AND r.short_name u.id =? AND u.username AS? < / wls:sql - list-group-members >

  < / sec: authentication - provider >

  < sec: authentication - provider xsi: type = "wls:default - authenticatorType" >

  < sec: name > DefaultAuthenticator < / sec: name >

  < / sec: authentication - provider >

  " < sec: authentication - provider xmlns:prov = ' http://xmlns.Oracle.com/OracleAS/schema/11/JPs/WebLogic/providers "xsi: type ="prov:trust - service-identity-asserterType"> ".

  Trust Service identity Asserter < sec: name > < / sec: name >

  < / sec: authentication - provider >

  < sec: authentication - provider xsi: type = "wls:default - identity-asserterType" >

  < sec: name > DefaultIdentityAsserter < / sec: name >

  < dry: active-type > AuthenticatedUser < / dry: active-type >

  < / sec: authentication - provider >

  " < sec: role - Mapper = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - role-mapperType "> ".

  < sec: name > XACMLRoleMapper < / sec: name >

  < / sec: role - Mapper >

  " < sec: authorizer = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - authorizerType "> ".

  < sec: name > XACMLAuthorizer < / sec: name >

  < / sec: authorizer >

  < sec: adjudicator xsi: type = "wls:default - adjudicatorType" >

  < sec: name > DefaultAdjudicator < / sec: name >

  < / sec: adjudicator >

  < sec: credential - Mapper xsi: type = "wls:default - credential-mapperType" >

  < sec: name > DefaultCredentialMapper < / sec: name >

  < / sec: credential - Mapper >

  < sec: cert - path-provider xsi: type = "wls:web - logic-cert-path-providerType" >

  < sec: name > WebLogicCertPathProvider < / sec: name >

  < / sec: cert - path-supplier >

  < sec: cert - road-builder > WebLogicCertPathProvider < / sec: cert - road-builder >

  < sec: name > myrealm < / sec: name >

  " < sec: password - validator = xmlns:pas ' http://xmlns.Oracle.com/WebLogic/security/providers/passwordValidator "xsi: type =" not: System-Password - validatorType "> ".

  < sec: name > SystemPasswordValidator < / sec: name >

  < not: min - password - > 8 length < / not: min - password - length >

  < not: min-digital - or - special-characters > 1 < / not: min-digital - or - special characters >

  < / sec: password - validator >

  < / domain >

  < domain >

  < sec: authentication - provider xsi: type = "wls:sql - authenticatorType" >

  db_user < sec: name > < / sec: name >

  < sec: control - flag > OPTIONAL < / sec: control - flag >

  < / sec: authentication - provider >

  < s: deploy-credential-mapping-ignored > true < / sec: deploy-credential-mapping-ignored >

  RDBMS < sec: name > < / sec: name >

  < / domain >

  field < default > myrealm < / default domain >

  < credentials encrypted > {ESA} oiXGiKafJRTHRLy3teTxciHGGJde23frXWjmnQAK2qQIuRYhySgd6oh/ZsnHQK1u99KboPN4Tjo5uS6tg37hufUPCJIdgDAhAOjBEZHVTXFc4YwQmZ6jdCpqlqEjUOkK < / encrypted credential >

  WebLogic < node-Manager-user name > < / node-Manager-user name >

  {ESA} < node-Manager-password - encrypted > dPzCkXm4Z8SaMVCroCwFXEIvbz/FTMroi8W/aDM7blA = < / node-Manager-password encrypted >

  < use-kss-for-demo > true < / use-kss-for-demo >

  < / security configuration >

  < Server >

  < name > DefaultServer < / name >

  < ssl >

  < name > DefaultServer < / name >

  < enabled > true < / enabled >

  < Listening port >

  8102

  < / Listen-port >

  < two - way ssl compatible > true < / two - way compatible ssl >

  < / ssl >

  < Listening port >

  8101

  < / Listen-port >

  > web server <

  < name > DefaultServer < / name >

  < log-server-web >

  < name > DefaultServer < / name >

  < elf fields > date time cs-method ctx-ctx - sc-status cs - uri DIN ecid < / elf fields >

  <-log file format > extended < / format of log file-->

  < / Web-server log >

  < / web server >

  BRP1LAP16 < listen-address > < / listen-address >

  < tunneling-enabled > true < / tunnel-enabled >

  <-diagnosis-server configuration >

  < name > DefaultServer < / name >

  < diagnosis-context-activated > true < / diagnosis-context-enabled >

  < / config-diagnosis-server >

  defaultCoherenceCluster < consistency cluster-system-resource > < / coherence-cluster-system-resources >

  < / Server >

  < incorporated-ldap >

  < name > DefaultDomain < / name >

  < credentials encrypted > {ESA} WRTXOv5WcAtcIZFA7g9azU4v/ogflkbFEN1TAdhhGbU6R7RiiSfLaouE6fgnkjRg < / encrypted credential >

  < / embedded-ldap >

  configuration < version > 12.1.2.0.0 < / configuration-version >

  < app deployment >

  State-management-provider-memory-rar < name > < / name >

  DefaultServer < target > < / target >

  RAR < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/com.Oracle.State-management.State-management-provider-memory-RAR-impl_12.1.2.rar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  DMS Application #11.1.1.1.0 < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.dms_12.1.2/DMS.war < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > wsil-wls #12.1.2.0.0 < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/com.Oracle.WebServices.FMW.WSIL-WLS-impl_12.1.2.ear < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > coherence-transaction-rar < / name >

  DefaultServer < target > < / target >

  RAR < module-type > < / module-type >

  < source path - > C:/Oracle12c/Middleware/Oracle_Home/oracle_common /... /Coherence/lib/Coherence-transaction.rar < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > wsm - h < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.WSM.pm_12.1.2/WSM-pm.ear < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < Library >

  [email protected] oracle.sdp.client # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.SDP.client_12.1.2/sdpclient.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.pwdgen # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.pwdgen_12.1.2/pwdgen.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] owasp.esapi # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.owasp_12.1.2/OWASP-esapi.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.wsm.seedpolicies # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.WSM.common_12.1.2/WSM-seed-policies.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] odl.clickhistory # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.odl_12.1.2/clickhistory.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] odl.clickhistory.webapp # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.odl_12.1.2/clickhistory.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > oracle.jrf.system.filter < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jrf_12.1.2/system-filters.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.jsp.next # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jsp_12.1.2/ojsp.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > oracle.dconfig - infra #[email protected] < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.dConfig-infra_12.1.2.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > orai18n-adf #[email protected] < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.nlsgdk_12.1.2/orai18n-ADF.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.dconfigbeans # < name > < / name >

  DefaultServer < target > < / target >

  jar of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.dconfigbeans_12.1.2.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.domain # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.model_12.1.2/ADF.Oracle.domain.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.businesseditor # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.businesseditor_12.1.2/ADF.businesseditor.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.management # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.management_12.1.2/ADF-management.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.domain.webapp # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.view_12.1.2/ADF.Oracle.domain.webapp.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > jsf #[email protected]< / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jsf_2.1/JSF-RI-21.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > jstl #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:\Oracle12c\Middleware\Oracle_Home\wlserver/common/deployable-libraries/JSTL-1.2.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > UIX #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.uix_12.1.2/uix11.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > ohw - FRC #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.help_5.0/OHW-RCF.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > ohw - uix #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.help_5.0/OHW-UIX.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.desktopintegration.model # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.desktopintegration.model_12.1.2/Oracle.ADF.desktopintegration.model.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.desktopintegration # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.desktopintegration_12.1.2/Oracle.ADF.desktopintegration.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.jbips # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-jbips-SLIB-stub.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.composer # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-composer-SLIB-stub.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.model.slib # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-Model-SLIB.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.view.slib # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-view-SLIB.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.webcenter.slib # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-WebCenter-SLIB.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  <>shutdown-class

  < name > DMSShutdown < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.dms.wls.DMSShutdown < / class name >

  < / stop-class >

  <>start-class

  < name > class start JPS < / name >

  DefaultServer < target > < / target >

  < deployment > 115 order < / order of deployment >

  > class name < oracle.security.jps.wls.JpsWlsStartupClass < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > JPS start after Activation class < / name >

  DefaultServer < target > < / target >

  < deployment-order > 160 < / order of deployment >

  > class name < oracle.security.jps.wls.JpsWlsPostServiceActivationStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > false < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start WSM < / name >

  DefaultServer < target > < / target >

  > class name < oracle.wsm.config.WSMServerStartupShutdownProvider < / class name >

  < / start class >

  <>start-class

  < name > class start JRF < / name >

  DefaultServer < target > < / target >

  < deployment > 110 order < / order of deployment >

  > class name < oracle.jrf.wls.JRFStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > ODL-start < / name >

  DefaultServer < target > < / target >

  < deployment > 145 order < / order of deployment >

  > class name < oracle.core.ojdl.weblogic.ODLConfiguration < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > DMS-start < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.dms.wls.DMSStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start context AWT Application < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.jrf.AppContextStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start of Web Services < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.j2ee.ws.server.WebServiceServerStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  store < file >

  < name > mds-GOSA < / name >

  < Directory > store/gmds < / book >

  DefaultServer < target > < / target >

  < / file-store >

  < name-server-admin > DefaultServer < / name of the server-admin->

  < wldf-system-resources >

  Module FMWDFW < name > < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > diagnostics/Module-FMWDFW - 2818.xml < / file-descriptor-name >

  incident creates FMWDFW < description > from non-controlled Exceptions and critical errors < / description >

  < / wldf-system-resources >

  < jdbc-system-resources >

  < name > LocalSvcTblDataSource < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/LocalSvcTblDataSource - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-data-source < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-datasource - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-audit-viewDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-auditview - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-audit-DBDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-audit - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > mds-GOSA < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/mds-GOSA - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > workdayDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/workdayDS-6554 - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < consistency cluster-system-resource >

  < name > defaultCoherenceCluster < / name >

  < name-file-descriptor > coherence/defaultCoherenceCluster - coherence.xml < / file-descriptor-name >

  < / coherence-cluster-system-resources >

  < / domain >

  Data source that I use it is wordayDS.

  I have deleted my domain name and create new ones yet to configure SQL authentication, and it works fine.

• Re: Satellite A300 sometimes fails to start

  My Satellite A300 sometimes fails on start when displaying a logo of Toshiba.
  I don't know why. Y at - it a touch to show a p.o.s.t. tests?

  Sorry for my English.

  Hello

  You can change in the BIOS the option to boot from normal to fast.
  I think that this will disable the Red Toshiba log and show you the post screen.
  But to be honest, I don't know if this could be help full.
  In any case, if the laptop is unable to pass on the MESSAGE, something might be wrong on the motherboard; the modules, memory example or similar

• Error: "the application failed to start because its side by side configuration is incorrect."

  Original title: youcam /camera fun zone

  How can I solve the problem / the application has failed to start because its side by side configuration is incorrect is the message that is displayed

  [Moved from comments]

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  1. don't you make changes to the computer before the show?

  2. which version of the operating system is installed on the computer?

  3. when exactly you get this error message?

  You can uninstall all existing Microsoft Visual C++ Redistributable Package on the system and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Uninstall existing Microsoft Visual C++ Redistributable Package

  Reference:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  To reinstall the latest Microsoft Visual C++ 2010 Redistributable Package

  Reference:

  Microsoft
  Package redistributable Visual C++ 2010 (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Microsoft
  Package redistributable Visual C++ 2010 (x 64)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Hope this solves the problem.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Microsoft XP blue screen and message - this applicationhas failed to start because LSASRY.dll was not found, that reinstallation can correct moyenessentiel,

  no disc recovery... on a Panasonic Toughbook CF-50

  Let's see...

  If you see a message like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because lsasrv WITH. DLL was not found.  Re-installing the application may fix this problem.

  Then, when you click OK, you have nothing more than a mobile mouse cursor.

  I seriously doubt that the opinion of the engineer of Microsoft Support for try the last good known Configuration will replace a missing file, so that theory approaches the area of ridicule.    This is not what LKGC, that is not what he does and is not how it works.

  Re-installation of XP is a very bad idea.

  There is also no need get a Windows XP installation CD, because you can create a bootable XP Recovery CD yourself and then see to replace the missing file.

  I understand not all next to a Microsoft representative.  Obviously not tested, won't work, won't help, but there are the necessary links to an article.   It's just another MSE wild-goose chase.

  The lsasrv.dll file should really never be missed, so answer these questions as the best yo can:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then at the Recovery Console prompt enter orders to replace the missing file from backup copies that are already on your system:

  Copy c:\windows\system32\dllcache\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Depending on your system configuration, you may need to copy the files somewhere else, so if they are not in the folder dllcache for any reason, enter the command like this:

  Copy c:\windows\ServicePackFiles\i386\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Remove the CD and then type "exit" and restart your system.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

  If your computer does NOT connect to a corporate network:

  • What changes have been made recently to your network hardware/software?
  • You have a home network? Wired or wireless?
  • How is your computer connected to the Internet?

• Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

  I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

  I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

  Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

  Hi Roykarnataka,
   
  MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
   
  Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
   

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  More information is available at: (sfc) System File Checker

• Error: ApopleSyncNotifier.exe. Application has failed to start because Core Foundation.dll not found in the system startup

  Original title: AppleSyncNotifier.exe and RUNDLL

  When I boot I get 2 drop down boxes 1 to ApopleSyncNotifier.exe.  Application has failed to start because Core Foundation.dll not found.  Re-Setup, the application may resolve the problem.

  RUNDLL error loading C:\WINDOWS\nulogry.dll.  The specified module could not be found.

  How can I fix them?

  Hi saintaugie,

  1. have you installed any Apple Sync program on the computer?

  We found that this happens if MobileMe on the computer is defective. To resolve this problem, we recommend that you uninstall MobileMe and check if the problem persists.
  a. to see How to change or remove a program in Windows XP
  b. in the list select MobileMe and uninstall it.
  c. restart the computer once the program is uninstalled.

  We found the same problem on the Apple Forums.
  See Impossible to locate the CoreFoundation.dll AppleSyncNotifier.exe error
  

  Note: You might consider to reinstall the program if you need. However, we do not recommend to install non-Microsoft programs as Microsoft has not tested the feature.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.