CPU TDP does not explain the real energy consumption?

Similar Questions

• BlackBerry BB Z30 Z30 connects to non-existent WiFi signal and does not accept the real

  I just changed wifi of our House 'Superfast' (100 Mb/s) because of problems with access around the House. I changed to 2G and the names of the signals of 5G from those used previously, xxx - 2 G and 5 G - xxx to xxx2 - 2 and xxx2 - 5G.

  However Z30, by listing the networks begins with

  Connected to xxx - 2 G, showing three bars and saying "Login to connect to the Internet." but I can not because it does not accept the password.

  Z30 then begins the list of available networks

  XXX2 - 5G, showing the four bars

  XXX2 - 2G, also four bars, saying "saved".

  at the bottom of the list is

  XXX - 2 G, three bars and saying: "selected."

  How do I remove a network as xxx - 2 G which doesn't exist or doesn't want to, because it blocks the ability to connect to one that exists and IS being sought?

  I can connect to xxx2 - 2G (new 'Saved' network), but after a while (maybe 10 minutes) the phone slides into the ghost...

  I would of course prefer actually to connect to xxx2 - 5 G - but this is not spared: whenever I have it try, ater entered the password (and getting a tick) I said - ' unable to add profile: another profile uses this SSID.» (WPS does not anyway I tried). Later: after having tried this ten or more times, sometimes xxx2 - 5G lists as saved (but usually does not), but is still inaccessible.

  How can I get Z30 to save a network / signal / profile - and use - it says is available and is looking?

  I'm an old man without a lot of hair left - and I'm pulling that very quickly...

  Cheers - Eric

  Eric, open your settings > Wifi.
  At the bottom of this screen type saved.
  Search for unwanted sources wifi saved old and press on & hold on this name to remove the pop up right.

• why sometimes the trace file does not explain the plan?

  Hello
  
  Sometimes, when I 'alter session set sql_trace = true' and run some querys, some of them don't see explained the plan in the trace file?
  
  I tried "alter system RAS shared_pool" before starting the trace, but not luck.
  
  (Oracle 10g R2)
  
  any ideas?
  
  Thnks
  Miguel
  
  Published by: jmmnunes on Apr 27, 2010 18:01

  some of them don't watch not explain the plan in the trace file?

  Log out of your session after you set the trace sql false?

  All cursors must be closed to have access to all the information from the row source in the trace file.

• Photoshop Camera Raw does not show the real overview of the image [was: Hello]

  I asked a question on lightroom yesterday and got an ansewer that solved the problem at the same time I tried today to work with photoshop and had the same problem, how to fix?

  I tried to do the same thing as in lightroom, but it did not work

  Thank you

  

  In Camera Raw window press Ctr + K to access preferences. Uncheck the box use Graphics Processor.

  What have you tried?

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• Cannot install Silverlight, get error 1503, CPU does not support the SSE instruction set that Silverlight requires to run

  Original title: silverlight

  I tried to install Silverlight on my computer running Windows XP 32-bit with service pack 3. My question is, it downloads and then when I try to install, it appears that my CPU will not Silverlight support. I get the Message 1503, CPU does not support the SSE instruction set that Silverlight requires to operate.

  So here's my question... How can I fix it? And what is the problem? Any help would be appreciated... Is it a I need a new operating system problem or just a cranky computer problem?
  Thank you
  Lynn

  I tried to install Silverlight on my computer running Windows XP 32-bit with service pack 3. My question is, it downloads and then when I try to install, it appears that my CPU will not Silverlight support. I get the Message 1503, CPU does not support the SSE instruction set that Silverlight requires to operate.

  So here's my question... How can I fix it? And what is the problem? Any help would be appreciated... Is it a I need a new operating system problem or just a cranky computer problem?

  Thank you

  Lynn

  ========================================
  This means that your material is not up to the task.

  If you search the Forums Silverlight 1503
  you will find that you are not alone.

  Silverlight .NET forums
  http://forums.Silverlight.NET/search

  The following article explains what is a CPU.

  Central processing unit
  http://en.Wikipedia.org/wiki/Central_processing_unit

• The CPU fan does not work on Satellite A60

  Hello world

  I have a little problem with my laptop.
  I noticed my cpu fan does not work. only the second fan are working fine. (general fan)

  my PC is a satellite A60
  You have a solution to find why my fan does not work?
  THX

  Hello

  I put t know what fan you mean because I saw only a single fan at the bottom of the unit. However, perhaps the second fan is hidden.
  It's not easy to say why the fan doesn't work. Maybe dust clog up the fan and cooling module may not work correctly. You can try to use the vacuum cleaner to clean the fan.
  If it doesn t work so I guess there must be something wrong with the material and to fix this, replace this part. But in this case I recommend to contact the after-sales Service of Toshiba partner. He has much more experience in such cases.

• The Windows 7 CPU usage does not correspond to processes

  I used this system with Win7 64 bit for years and the normal use of the processor is 3% (I keep a monitor app open all the time).  After a reboot, this morning, my use is stuck around 20%.  Nothing terrible and my performance is fine, but it worries me because it is not normal.  In addition, according to the focus of the mouse, 'busy' animation always goes, so it really seems that something is running.  What is really strange is that I can not reconcile the CPU usage by the process of use/idle.  When I bring up the Task Manager and look at the processes tab, the system idle process is consistently in the upper 90s and some processes show sometimes 1 or 2%.  This is all quite normal and I expect to see.  But the use of the CPU at the bottom of the window indicates 20% or more.  It makes no sense at all.  Idle process + the CPU usage must be about 100%.  I realize that it has rounded passes with the percentages of process, but inactive processes should be 100 - all processes and thus only one percent or so off, not 15% off service.

  Is it possible that a process is running, that is hidden from me?  It seems unlikely that even if that were the case, it should affect the % idle process.  I did go to the performance tab and click on the "Resource monitor" button to get more details, but who do not appear to reveal something new.  Processes use about 20%, service about 1 or 2%.  The list of the process here does not show the idle process, but looking at the process I see only 3-5% use if I add.  This page gives percentages for the 100th of one percent, so it is not the question of rounding.

  In the past, I could always correlate the use of the CPU in the process and you could see that was consuming the CPU and kill him if necessary.  But now I don't know what is happening.  Any suggestions on what to check would be appreciated.

  I also, tried MSCONFIG and services and putting in service of the elements, everything makes sense, so I didn't try a clean boot.  I have a system restore a few weeks ago (and the data is backed up each night), but I'd rather not have to go through all this.

  Thanks for the help.

  Hello Bob,

  I'm glad to know that you have addressed the issue.

  Your efforts to solve this problem is appreciated. We appreciate the time taken by you to share the resolution. I don't know that it would be beneficial to other members of the community as well.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• CS6 does not start, the trial version will open instead of the real version

  After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?

  Hi MFGTG,

  I checked the serial number and found that there is a problem with the serial number.

  I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link

  http://helpx.Adobe.com/contact.html

  Thank you

  Kapil

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Exactly how AE does not distribute the images in the scenario of a composition of 29.97 FPS?

  This issue is out of curiosity. I always wondered how this works because from what I see, a composition with a framerate of 29.97 FPS will have just 30 frames per second for every second on the timeline. Will it ever really a second on the timeline with 29 pictures in to compensate for the gap of 0, 03-framework? If not, then how is the resolved variance? Is the way the calendar displays images not 100% about how reliable they are actually distributed through time? Looks like this will have to be a 'yes '. But then how not problems of this?

  For example, if you want to have something to display a timer that counted in seconds right , helps manufacturers of second on the timeline would be inaccurate? Even if there is a second image 29 somewhere on the timeline to compensate for the difference of 0, 03 - fps, there still are many executives who have proved align perfectly seconds entire on the timeline, but in reality they would line up with them. So I guess that follow-up question, I, it is the timeline a accurate watch accurate actually seconds or frames in 29.97 FPS scenario? According to my way of thinking, one of them can be quite correct, whereas it is? (After asking this, I thought about the time value to the output text and look to see what is displayed when the playback head is a brand of second whole.) It showed a whole, second value for all those that I checked, and so this means that the timeline is exact frames, not seconds)

  Let me explain. This is going a little long so let me first start by saying that no. frames are lost, mixed or deleted when you run at 29.97 FPS. The only thing that changes is how you count frames. This info will be part of a forthcoming White Paper on my new Web site.

  What color television came the engineers needed to add a few lines in the removal of a TV signal part to send the color information. It is called color burst. The number of new lines that they needed a pris.03 seconds to add to the signal. Since all countries that run 60 Hz electricity works at 60 Hz, and television at the time was intertwined with a pair of even and odd scan lines form a framework so rather than expedite the time it took to draw each scan line was decided to reduce the rate of 29.97 FPS to keep things running at an even multiple of 60 cycles. This would keep old black and white televisions works without problem. Change the time it took to paint a line of scanning would be lack of things for older sets. Country PAL found a better way to add color information using some existing lines which were not used for anything else so they eliminated the problem.

  What's meaning? They had to slow the pace because they needed to add a few lines to the color TV signal would know where they were supposed to show the program in color. The largest number of lines still had to adapt to 60 cycles, so if you have added several lines, you reading fewer frames per second.

  Now, here's the problem. How you count this odd number of images and make it work with a real-time clock. Fall time frame was the solution. Drop Frame timecode does not diminish the frames, it just is not all because when the standard broadcast half-hour is 28 minutes, nobody's going to care about a missing image number... NOTE: I did not lack a framework.

  I tell him again. NO frameworks are never fallen or crushed or shortened in any application that is used to change or manipulate the video. The only thing that happens is that some numbers of chassis jumped so the hours, minutes, and seconds displayed on the timer is always accurate.

  You can get funky what happens with individual images or fields when you put images of 24 frames per second of a film in a video sequence of 29.97 FPS - but they worked already. The same thing happens when you add pictures PAL to NTSC program. When images of 24 fps are put in a PAL 25 fps video format they just play back a little faster so they don't have to do a funny interpolation.

  We will return to the time display in your AE timeline when you have a 29.97 (or the standard fractional rates as 59.94 or 23.976) default display time should be Drop frame that removes picture numbers that it counts, but does not diminish the frames. With DFTC (indicated by the; between hours, minutes and seconds) is used when the chronology said 30 minutes, then it will take 30 minutes exactly for your video playback. You can check this for yourself by browsing through a timeline with a Drop Frame timecode display one image at a time. Select the window timecode and top to 10000 (1 minute no seconds without frames) you will find yourself 0; 00; 59; 28 step forward of an image to get to 0; 00; 59; 29; and then a framework more far and end up at 0. 01; 00; 02 no frames were dropped, only the chassis of 0 numbers; 01; 00; 00 and 0, 01; 00; 01. the time displayed is correct in the duration of an image, that doesn't make much difference when you deal with a minute, but it makes a huge difference if you're dealing with an hour.

  There is an option for the Non-goutte time frame, but both practices, it is useless because the Timekeeping in the timeline panel is always bad. More the program error. Fall time frame gives you the exact time with a maximum error of a frame and a half. In the one hour show, you're out of 4 seconds. It is not significant for a youtube video, but it would be disastrous for network programming.

  You can check it out yourself. Start a new comp and the duration 1 hour. Add a solid layer and then press o to move the out point and you will see that the timecode is 0, 59; 59; 29 images. Do not get confused here because he said not 1 hour. Don't forget that the last image needs to continue to play for the program to stop because the CTI stops on the last visible image. Now, hold down the Ctrl/Cmnd key and click on the time indicator in the timeline and you'll see 107891 frames. A word of caution, if you look at the display of the time code and that you change the layout or project of frame drip not part time you will change the length of the composition and the number of images.

  Now, go to the project settings in earlier versions or to the Composition settings in the latest versions and select Non Drop Frame timecode display. Check the chassis numbers - they are exactly the same. Now Ctrl/Cmnd click the time indicator again and you will see 0:59:56:11 - If you were creating an hour long program and that you had the timecode set to image not to drop your program you would like to add about 4 seconds to your program. Imagine your surprise when he played on television and the last 4 seconds was cut off.

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• Text properties in the pages of title - not showing the real values

  Hello world

  When I opened a title page in first Pro CS5 and then select the text, the following properties of the text in question are the following:

  Position x = 100

  Position Y = 100

  Width = 100

  Height = 100

  When I use the selection tool to select an area outside the area of text and then select the text box once again, the properties of the text above show their "real value".  For example, the above text for a specific text box properties will change to:

  Position x = 437

  Position Y = 134,6

  Width = 401

  Height = 170

  Please can someone explain why this happens?  In first Pro CS2, when I selected a text box in a page title, true values were displayed immediately.

  Thank you very much

  Angela

  It's not not clear to me what would be the purpose of design for the properties of an element title does not display the actual properties, so I let go my curiosity and played around a bit.

  I tested in CS4 (then to CS3), and observed what I think are the same questions.  I think I would call it a "bug", although one whose effects are easily circumvented.

  Create a title.  Type a text box (or any other object, such as a form).  The x pos, pos, width and height are all 'accurate '.  Close and reopen (you don't have to put the title in a sequence).

  I think the text box (and the first text box if more than one parameter is created) are selected by default, but the properties are those of 'bad' Angela: 100, 100, 100, 100.  Click in another area of text or shape etc (and no matter with what tool), the properties are then "correct".

  Is the 100 x 4 a default value for something?  (I don't see any of these default values).  The titration module, select a design object (I don't think I like that, but I see as a design choice), but not bad set the properties of the selected object?  But then why put the 100 x 4?

  I also ran the test in CS3; same thing.

  I'm not bothered by it, but I think it's a bug, so I filed a bug report.  You can choose a previous version to the report, and since I have not yet installed cs5, I reported for CS4 (and said I have demonstrated for CS3 and CS4 and that a forum user has reported for CS5).  Angela, you can also report so there is at least one report for CS5.

• IPhone does not accept the code to check for text messages

  II phone does not accept the code verification for the transfer of messages text imac

  Maybe these articles will help:

  Get a verification code and connect with authentication to two factors - Apple Support

  If you don't receive your check or reset email - Apple Support

  If this is not the case, can you explain a little more detail what exactly is your problem?  Or see the 'Contact us' at the bottom of the second article.

• When a tab is opened, it does not overlap the screen im on.

  So when I like to open another tab when I click a button, it does not overlap the screen, I'm on and if I click it, nothing happens, so I have to minimize and press tab to open it and when I click on the tab I am the last, it works fine but the other tab is not.

  It seems that your browser runs slowly due to lack of memory (why a new loading tab so seems to freeze and can be thawed by minimize and maximize). This explains also why you can change to the previous tab, but not others; the last tab you used is still in main memory, while the other tabs should return loaded into main memory when you change their (as other data takes the place of the main memory).

  So I suggest you try to restart Firefox (as some may have memory leaks) and closing other applications you have open (use the Task Manager to help if they are slow to respond). If you're still having problems, try closing using the tabs/windows less.

  If you still have the problem, then you should try reinstalling Firefox (see uninstallation and installation).