CPU Upgrade for Presario SR1110NX?

Is there an available CPU I can use an upgrade for a Presario SR1110NX? It currently has a Celeron processor (I don't know what type of socket). If not, is there a motherboard I can get low fees for this case that does not require update me all my (old) devices and memory? I don't want to buy a new machine until the summer, but my CPU usage is at 100%.

Thank you

Dante

Hello

Which will support your card mother MS-6577 (Giovani, Giovani2).

Socket 478 for Intel P4 Willamette and Northwood 1.4 GHZ to 2.8 GHz or higher processors.

Here is a link to NewEgg for a card mother microATX replacement. You will need to buy the DDR2 memory, but it's pretty inexpensive. All of your devices will work in this one. You need to replace the power supply. The diagram of the motherboard is not marked ATX is an owner of COMPAQ connector configuration. Try to use it on a new motherboard will probably lead many motherboard smoked and fried

Tags: HP Desktops

Similar Questions

  • COMPAQ 510 T1500 1.8 GHZ: CPU UPGRADE FOR COMPAQ 510 T1500 1.8 GHZ

    Hi, I want to improve my laptop cpu but do not know if the motherboard supports it and what upgrade options are compatible with the motherboard chipset

    Hello

    Double post, please use:

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/CPU-upgrade-for-Compaq-510-T1500-1-8-GHz/m-p/5505032

    Thank you.

  • Pavilion Media Center a1640n: options of CPU upgrade for an old HP Pavilion Media Center a1640n...

    Hi all.  I've been cleaning and updating my granddaughter desktop PC.  This model used by an Asus P5BW - rev 1.05 MB (HP/Compaq name: Buckeye-GL8E), a processor Intel E6300 4x1Go RAM PC2-6400 and runs a 10 Pro 64-bit Windows installation.

    I thought I would upgrade the CPU while I was there and bought an E6700 opportunity that is part of the Intel same product range with plug, with the exception of the higher clock speed.  On these two circuits rated FSB is 1066 and documentations of HP wrote this should work: http://support.hp.com/us-en/document/c00748726

    However - there is always a but isn't there - the E6700 does not start in the BIOS.  No beep codes or any other indication, just never reveals the splash screen.  I have reset the CMOS, tried more fast RAM RAM slower but none of these things makes no difference.  I checked to see if there was a BIOS later / updated but it seems that it was never a product, v3.17, and this is what is currently installed.

    Does anyone know if there are some technical limitations - like model of processor being hard coded in the BIOS or something like that--that it prevents the work or have I bought probably a bad cpu chip?

    Thanks in advance for your help.

    Howard

    Resmond, WA

    Greetings,

    The processor should work as the specs are the same.

    When you reinstall the E6300 it starts fine but the E6700 is DOA.

    Looks like a bad chip. The only way to check is to install the E6700 in a different motherboard.

    See you soon!

  • CPU upgrade for HP Dv7-6179us?

    I did a video on my laptop and quickly noticed that my current system could not follow the program I run (Cyberlink Powerdirector 11). I already ordered a new 16gig RAM again and I was wondering what I can do to upgrade my CPU... Any suggestion would be greatly appreciated thanks!

    MysterMason wrote:

    I'd be able to keep my current hard drive and always install the new SSD in extra Bay?

    Yes of course. However, it may require a fresh install of Windows on the new SSD. Origin of the hard disks on computers laptops HP are larger that the SSDS and a factory reset can end with a lot of mistakes because the ssd is not large enough to manage the restoration to the original state. A new facility has always worked for me with the key of portable computer product at the bottom of the unit. The only thing I had to do was uncheck activate online because it must be done after you get the activation message (by phone is ok) a few days later.

  • CPU upgrade for Satellite Pro A10?

    Toshy A10 my wife has a Celeron 2.2 CPU. Can I get a faster processor?

    Belarc gives details of 'primary circuit' as:

    Tip: TOSHIBA Portable PC Version A0
    Serial number: $$ S238Q23F
    The bus clock: 100 MHz
    BIOS: TOSHIBA Version 1.30 02/09/2003

    768 MB of RAM is installed.

    Thank you.

    Steve

    Hello Steve

    If you Google a bit you will find some A10 units come with Intel Celeron 2.5 GHz processor. Maybe you can use it to upgrade.
    Speed of the bus on this unit is 400 MHz.

  • CPU upgrade compaq presario sr511onx

    I need some info, I am doing an upgrade to the processor on a presario sr511onx.  IT has a single processor core in there now AMB athlon 64 3800 + 2.40 GHX. Here is the new processor I will install here is the link.http://www.outletpc.com/c1482.html. Here is the product info link.

    http://h10025.www1.HP.com/ewfrf/wc/prodinfoCategory?LC=en&DLC=en&cc=us&lang=en&product=3436819

    I wonder if i this is goig to be a nighmare to remove. I wonder if I can drop in and it will go.

    Message edited by jchambers2586 on 30/01/2009 14:30

    I see a lot of performance of a single core processor processor .to duel core I have also 3 GB of ram installed.

    Message edited by jchambers2586 on 02/01/2009 12:49

  • CPU Upgrade for Optiplex 755 - Core 2 Quad?

    Hey guys!

    I have a Dell Optiplex 755 desktop computer. It's a SFF, and I picked up the recycling room in my office. It just need a HD fan, and it runs great. He got a Core 2 vPro 3.0 ghz in there at the moment, 4 MB of cache and FSB 1333.

    It works well, but I would like to upgrade to a slightly faster processor and I am considering my options. I watched the fastest Core 2 Duo, I couldn't, and they offer only a 3.33 ghz, however, it's something like $350 dollars for the processor.

    I started thinking maybe I should see what there is and realized that there is also the Core 2 Quad and the Extreeme of 2 Core that are available with one cache of FSB 1333 mhz, and PGA775 (or other).

    I'm curious, but you guys don't know if it is possible to install a Core 2 Quad or a Core 2 Extreme in my Dell Optiplex 755? This PDF shows on Page 10 to take a Core 2 Quad. http://www.Dell.com/downloads/global/products/Optix/en/opti_755_techspecs.PDF

    Which is the maximum that the BIOS will recognize / support? Can I use a QX6850?

    Thank you guys!

    Todd

    These are the Quads, we validated-
    N652J 3.00 GHz Yorkfield Quad Core Q9650, 12MB
    F886J, Yorkfield 2.83 GHz Quad Core Q9550 12 MB, 1333 MHz FSB, E0
    N650J 2.66 GHz Yorkfield Quad Core Q9400, 6 MB, 1333 MHz FSB, R0
    MP627 2.66 GHz Kentsfield Core Quad Q6700, 8 MB, 1066FSB, G0

  • Ivy Bridge CPU Upgrade for Inspiron 620

    As stated above, I have a 620 Inspiron with a Core i3 2120 which is a Sandy Bridge processor. I have the opportunity to get a Core i5 3570 for a very good price, which is a processor Ivy Bridge, but the word is that the Ivy Bridge processors can be used in some of the Sandy Bridge motherboards with a BIOS update. According to my system in the Device Manager devices, I have the drivers for chipset H61. However, I can't have an answer directly from anyone or not an Ivy Bridge CPU will work in my computer. I thought that maybe someone from Dell could help me this clear up because I'm not sure I can return the CPU as soon as I remove it from the box. It would be a fairly expensive mistake. Any comments would be greatly appreciated.

    I don't think that it will be possible, because Dell does not have a BIOS for your specific model supporting Ivy Bridge. They may have sold a 620 with Ivy Bridge, however the more specific model number will be different, and they contain different parts and require different BIOS. For example on the number of specific model, the original Dell Inspiron 15 7000 series had a model number of 7537, the new 15 Inspiron 7000 (same model) series has a model number of 7547 (different specific model number)

  • Best CPU Upgrade for s5202uk

    Hello

    I've recently updated my graphics card in my HP S5202UK-M and I was wondering what is the best processor that will work in this PC, the motherboard is a Pegatron M2N78 - THE narrated 6 with bios version 5.22 I think it is the most recent, a link if it is not up-to-date, I read somewhere online the last bios update adds support for the AMD Phenom X 6, I was wondering if that was the case in the plug from motherboard site just says HP Phenom X 4 supported

    Hello

    AMD sockets usually have very good compatibility.

    Know what the return policy is before you buy anything.  If the six main does not work, then you can get a refund?  If you cannot get a refund then can you exchange it for another model? A model of Exchange would be satisfactory to your needs?

    What would I do?  I'd go for it, but then my wallet could be deeper than yours.

  • Dell Inspiron 531 CPU Upgrade for AMD Phenom X 3 8450?

    I have a Dell Inspiron 531 with an AMD Athlon 64 X 2 processor.

    I am lucky to have an AMD Phenom X 3 8450 - HD8450WCJ3BGH CPU which is Socket AM2 / Socket AM2 +.

    The AMD Phenom 8450 3 X is compatible with the Inspiron 531?

    joedella

    No, the AMD Phenom X 3 8450 is not compatible.

    The motherboard does support all AMD quad Core processors, or 3.

    Bev.

  • CPU upgrade for dc7700 C2D 6300 to Pentium D 3.2 XE?

    Hello everyone, I recently bought a HP/Compaq dc7700 SFF with a processor intel Core 2 Duo E6300 1.86 GHz. I have a spare Intel Pentium D 940 Extreme Edition @ 3.20 GHz and I wonder if there is much exchange gain it in. The OS is win7 64 bit, 8 GB RAM. the two procs are LGA775 socket.

    Thanks in advance!

    Thanks for the replies. In the search further, it seems that the C2D E6300 offer performance equal to the old Pentium D 3.2 with less electricity and heat consumption, so I'll leave it as what.

    Thanks again.

  • Classified into CPU upgrade PowerEdge T320 - I was wondering if I need thermal paste for the heatsink that came with it

    Subject pretty much said it all.

    We received a CPU upgrade for our PowerEdge T320. The new processor comes with a new heat sink, and it seems that there is a thermal buffer of paste on the lower part of the radiator.

    I wonder if anyone knows if I need to or recommend that I put the extra thermal paste on the chip before mounting the radiator.

    Hello.

    The quantity of thermal paste comes with your CPU should be enough for the CPU holding it in place.

  • Equium L20-264 - CPU upgrade

    Hello world

    I have Toshiba Equium L20-264 and I want to move into gear
    Can someone help me please?

    I had already upgraded to 2 GB of Ram, but my CPU is still 1.4 GHz.

    Please guide me what to do and if it supports several Ghz processor, which will be the best place to buy.

    Thank you.

    I assume that you have not read all the posts here in the forum about upgrading the CPU s for laptop?
    Did you?

    Some facts first:
    Update CPU is very delicate and depends on the chipset and BIOS support.
    In case one of the parties (chipset or bios) would not support new CPU, the will to power laptop on.

    Second: the laptop seems to be equipped with an Intel Celeron - M CPU, and I suppose the other Intel Celeron-M CPU be compatible:
    Intel Celeron M 370 (1.5 Ghz)
    Intel Celeron M 380 (1.6 Ghz)

    Everything supports the FSB 400 Mhz

    But guess what? Even if you add the new processor at 1.6 Ghz, the performance gain will be not noticeable. So in my eyes, CPU upgrade for this old book is useless. It won't add any performance benefits.

  • Issue of upgrade CPU laptop (Compaq Presario)

    Hello

    Can someone please confirm that my Compaq Presario B1223TU, who has a processor Intel T5250 CPU can be upgraded to the Intel T9500 (Penryn) 2.6 GHhz.

    I already installed the latest version of BIOS 68MSU f.0Une on my computer.

    After checking the site Web of Compaq to my computer here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-57986-1&lc=en&dlc=en&cc=us&...

    In the correction and improvement of article he States: "adds support for new Intel processors.

    What exactly are these new Intel processors because it is not clear? It's the BIOS version 68MSU ROM. F05

    I guess that means it supports the new Penryn T9500, T8100, T8300 and T9300 processor, but I'm not sure.

    I also found this site selling retail who says that it is supported as well for my particular laptop but it does not include the Intel T9500: http://www.ambry.com/page/modelnu/GS111PA/463050-001.html

    Can someone please confirm that the T9500 is a possible upgrade for me. Thank you.

    Kind regards

    Tze

    I give her thumbs upward

  • Compaq Presario CQ5340SC: Compaq Presario CPU upgrade to Q8400 E3300 fails

    Then...

    I tried to uppgrade E3300 CPU of my Presario Q8400, but all I get is the bios error beep, machine/poster starts not at all, only the fans.

    (1 short + 1 long = problem (?)) memory (?)

    Compaq Presario CQ5340SC

    Model MB is: H-I41-Μatx (Eton) and it should support "Core 2 Quad Q8xx0/Q9xx0 (core Yorkfield) (95W).

    Power supply: 500W

    Memory: 2 x 2 GB PC3-10600 DDR3 - 1333 Mhz (works fine with the old/original E3300 CPU)

    OS: Windows 7 64 bit HomeEdition

    BIOS: 5.09 11/27/09

    Old processor: Intel Celeron Dual - Core E3300

    New processor: Intel Core 2 Quad Q8400

    I tried with one stick of memory from 2 GB also, but not luck.

    I tried to clear the cmos by jumper settins 2-3 1-2 for 10 sec (uninstalled powercord), no luck.

    Any ideas? :[

    Thank you for the additional information.

    I'm not familiar with the memory you are using.  Came with the computer?  If this isn't the case, it may be cause of your problem.

Maybe you are looking for

  • T400 screen dim on startup

    Hello At the start of my laptop, the screen very dim. After the splash screen, the screen goes white, however, windows doesn't start correctly because I can hear the OS welcome music. I also hear the spinning of the HD and WiFi is also lit. But all o

  • Why can I not see my PXI chassis from a remote computer?

    I have a controller SMU-8130 and chassis SMU-1062 q. I want to add PXI chassis as target in my LabView RT project located on a remote desktop. However, LabView can not detect targets PXI and cannot NI MAX. I can see the PXI on my network and can it p

  • Screen distorted Outlook interface

    I asked this question to the technical support Microsoft Outlook but they refer me to the Windows support.Could you please help me solve this problem? :(Please note that the original question was another customer of yours) http://answers.Microsoft.co

  • 490 error when installing Windows 7 SP 1

    I ran the auditor of the State of preparation and still getting error 490. the journal of the audit tool is presented below. How can I fix it? =================================Preparation of control system was updated.Binary version 6.1.7601.21645Pac

  • Must remove sql tips - what don't get me.

    Dear Experts,I have a simple removal instruction that does not work and I don't know why, I don't get any errors, and deletion runs, but does not delete the users, should be.  I'm trying to delete users who are not logged for 180 days.  My delete is