CQ40-115AU

Similar Questions

• CQ40-115AU - Windows 7

  Hi all

  Can someone help, after installing W7 RC and found 3 under unknown base system drivers. Can someone tell what was it?

  Thanks much :-)

  CalvinLJH,

  Usually, if you have a media card reader, fingerprint reader or something of the sort would be those... because Windows 7 is still in RC stage not all drivers are updated immediately. I will try to use the Windows Vista drivers as they should work fine. For additional questions, Microsoft has an official Forum of Support of Windows 7 RC located here http://tinyurl.com/9fhdl5 . It is supported by the specialists of the products as well as engineers and support teams. You can ask your question here.

  Microsoft Windows Client team

• SPDIF out on Compaq CQ40-122AX

  I have a Compaq CQ40-122AX, running VISTA home basic sp1.

  There IDT High Definition Audio built in and a HDMI output. He also says that it will be an available SPDIF output using a HP/Dock. Now, I'd like to use the SPDIF output, but I am reluctant to by the docking station for £200 as advertised on amazon. In the options for the Soundsetup there is a definition available also SPDIF.

  IDT HD Audio Codec driver version: 1.0.5934.0

  For IDT HD Audio DEVICE driver version: 6.0.6000.16386

  Only the input/output Audio/video are:

  VGA

  HDMI

  Headphone 3.5 mm

  Microphone 3.5 mm

  I had a browse autour and found that some HP models spdif output available via the Jack 3.5 mm as optics, when the adapter is plugged it activates an LED inside and that it moves the optical signal to the Toslink cable.

  Adapter cable and optical at Maplin

  My question is, the SPDIF is accessible on my model of laptop CQ40-122AX with this configuration without the HP docking station or could there be another way? Since there is not in there, it must be possible to access it somehow, and the docking station just seems too expensive to make sense.

  Look forward to hearing responses.

  Message edited by Sven on 18/01/2009 05:27
  何思凡
  
  Compaq CQ40-122AX, Vista Home Basic 32 bit, AMD Athlon x 2 1.9 Ghz, ATI Radeon HD3200, 1 GB of RAM,
  
  -Each one favor Post back your results, resolved or not - LET BRAVO!

  No solution is presented using computers laptops, built in the ability to use SPDIF for DD and DTS streams. The only solution that I found satisfactory is the external soundcards next via a USB port.

  I use the product bought in Hong Kong, works well with XP and Vista, that's what I tried ebay. The least expensive solution to the s/PDIF output, I found. It is an optical output.

  http://CGI.eBay.co.UK/5IN1-USB-6-channel-PCI-external-moveable-5-1-sound-Card_W0QQitemZ220338593076QQcmdZViewItemQQptZUK_Computing_ComputerComponents_SoundCards?hash=item220338593076 & _trksid = p3286.c0.m14 & _trkparms = 72 %3 A 1300 | 66 %3 A 2 | 65 %3 A 12: 39 %3 A 1 | 240 %3 A 1318

  http://www.Google.com/products?complete=1 & hl = in & q = USB + to + Converter + SPDIF & um = 1 & ie = UTF-8 & his = X & OI = product_result_group & resnum = 5 & CT = title

• Help, please... I need Windows XP driver for my CQ40-121TU

  Help, please... I need Windows XP driver for my CQ40-121TU

  Please send me a full links to the driver for CQ40-121TU thank you very much...

  Your computer came with XP? If your computer came with VISTA and was never made for XP, so no XP drivers will be available for the system. I looked at the HP site and could not find XP drivers, which probably means that it is a model of Vista, not XP. If it came with XP then call HP and they will be able to send you a XP disc for a small fee, like $15 or more.

• Strange sound Compaq Presario CQ40-106TU

  Hi all owners of HP products.

  I bought laptop Compaq Presario CQ40-106TU 3 weeks ago, until now, when I play music or movies, all 5 ~ 6 minutes I hear a short noise distorted through the headphones or the speakers.

  I've uninstalled and reinstalled the audio driver. I have fully recovered my laptop, but this problem still persists.

  When he is silent, or I don't play music or movie there is no sound. in the case of all kind of music or movies, online, radio, playing by all kinds of media player as player windows media, jet Audio, winamp, I have this problem.

  the laptop has a system of its IDT High Definition Audio CODEC. in the card well it is mentioned that his system works correctly, but this problem makes me really mad.

  The noise sometimes interrupts the music for a moment.

  What can I do? Is - this hardware problem?

  I appreciate any help or instructions operation.

  Varshavian

  Thank you for your kind attention, I sent my lap top to the HP repair center and now it is not working properly. It was a hardware problem.

  Message edited by Soju on 18/02/2009 05:00

• HP Compaq Presario CQ40 330TU: BIOS password

  Hello

  I have a laptop Compaq Presario CQ40-330TU 10 Windows (32 bit) operating system. I seem to have forgotten the password to the BIOS of my laptop. I entered the BIOS password three times, whenever I entered the password, it said "Incorrect password". At the time wherever I typed the password for third time, he showed the number of the key as 56573544. Could you please help me in resetting the BIOS of my laptop password? Any help in this regard will be highly appreciated.

  Arun

  Enter 49451580

• Presario CQ40: Display a ratio and incorrect resolution even after installing drivers

  Number and name of the product

  HP Compaq Presario CQ40 (339TU)

  Operating system installed

  Windows 8 Pro (recently re-installed)

  All changes to your system until the problem occurred

  Accidentally deleted the partition reserved system (about 300 MB)

  The question
  

  I recently re-installed the OS on my laptop (the previous operating system was the same). I wanted to do a clean install and I accidentally deleted the system reserved partition which was about 300 MB.
  

  The installation is completed without any problems. After installation, I noticed that the native resolution became 1200 x 800 (3:2), where it was originally 1280 x 800 (16:10) and also the display is detected as "Mobile PC Display. I went through the update of Windows, but it also could not detect my drivers. I went to the official site of HP TechSupport (here's the link), but there is no drivers for Windows 8.

  Then I tried the Intel site and found drivers, them, but still nothing happened.

  I googled for 2 days to resolve this problem, found nothing that worked. I have re-installed, Reset, refresh, auto repaired, the PC from the windows installation CD, nothing worked

  I had used Windows Vista, 7 and 8 on this laptop. The previous version of windows, I used for 1.5 years is the same as the one I installed today on the same CD. Previously, when I installed windows and went to Windows Update, it detected all my drivers and updated their. I had nothing to fear.

  I was hoping someone here could find me a solution to this problem.

  Thanks in advance

  I fixed it!

  I downloaded the latest version of the bios and flashed. Previous bios version was same but now my resolution is 1280 x 800

  I did not myself before recovery disks, but I will of course in the future.

  Since I have no way of identifying what actually caused the problem, I'll stay happy with the solution that I found. This thread can now be marked "resolved".

  I thank very you much for trying to help. I love HP!

• I have a HP compaq cq40-340tu

  I have a HP compaq cq40-340tu and I can't have my disk for my drivers. I tried to watch any downloadable driver for my laptop but I do not find anything on the site of hp, on site there are 343 cq40 drivers cq40-346 but none for my laptop... can someone help me please?

  I am using Windows 7 32 bit... btw...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062 & LC = on & CC = US & DLC = in & sw_lang = & Product = 3887301

• Compaq cq40 flashing led forever

  Hai. My compaq cq40 is 2 years old. Now, after I connect my mobile samsung usb mode s2. My laptop freezes. I force shutdowned. Now its not not opening. NUM and caps lock led blinking forever. I tried the battery cmos ram of permutation of compensation. Removed wifi card. Nothing helped me. Plsss help me. Also tell me if there is problem in motherboardm how much does cost inr.

  If the blink code blink, pause, blink, pause, which indicates that the processor has failed the POST test.

  I'm afraid that this will require the processor needs to be replaced to correct the problem.  I'm sorry.

  You can try to contact HP to get a quote for how much it would cost to repair and compare that to the cost of having a local PC shop to be repaired.

• Disable the touchpad on Presario CQ40

  As I'm used to using the mouse I just plugged a mouse on my CQ40. I tried to disable the touchpad, but I was not able to do.  Could someone tell me please how to do it. The touchpad gives me lots of problem because it causes the mouse pointer move elsewhere when he is hit and it is very difficult to avoid touching when I work on the keyboard.  My email:[email protected]. Thanks in advance.

  Hello SHAI'YKS,

  The best way to disable the touchpad is the small button above him, there should be a small light blue press and it should go to orange or red to indictate turned, his most high the touchpad below the keyboard space bar, in the dark, before the greyness of the touchpad...

  Hope that helps...

• Compaq CQ40: CQ40 unlock password key: 80768533

  Hello

  I need CQ40 unlock password key: 80768533.

  Thank you very much.

  Hello

  You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.

  Or use the code below

  35640515

  You can:

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• Annoying green line glisten under Compaq Cq40 LCD screen

  I don't know if it's because of the new BIOS I installed that caused it that I improved F.24 F.30 version and after that all of a sudden there's this green line boring glisten under my LCD... and my temp CPU reaches now to + 60 degrees Celsius, while before upgrading my CPU temp only amounts to 32 degrees Celsius.

  I already flashed the BIOS F.30 and now he's back to F.24 the temp went down, but the green line which sparkle under my LCD screen is still there... I checked the new updates to the graphics card but it says that it is up-to-date. so theBIOS has nothing to do with the flickering line after all I thought that it was caused by the high temperature. Haven't bought my laptop in Singapore in February this year no problem until this one

  BTW, my laptop is a Compaq CQ40 319TU with Vista Home Premium OS license.

  Message edited by amps on 12/05/2009 16:09

  @ Topz25 I brought to the HP service center, it's a hardware problem, they replaced the LCD screen and they didn't charge me a dime no problems yet so far

• which processors can take a motherboard supported very 4101p (494035-001) jal50 used on compaq presario cq40?

  I have a compaq presario cq40-142tu, with a celeron t1600 installed. I want to replace this with a faster processor but can't find a site that lists all the processors that are compatible with the motherboard, which is a worm of 4101P jal50 1 or 494035-001.  as the celeron t1600 has a front side bus at 667 mhz, I guess procies upgrade as possible would be a t7600 to better or at least a t5500, since these procies run at the fsb even.  any advice on where to find a list of processors supported for this motherboard would be much appreciated.

  It took some time, but I finally got my hands on a t5850.  Installed and it works like a charm! a celeron t1600 it is now on a core 2 duo procie.  also improved the hard disk in the series hitachi 160 GB 5400 RPM to a 640 GB 7200 RPM samsung. also changed the RAM of 2 GB (1x2Go) tech of micron for gskill 4 GB (2x2gb) RAM.  OS is win 7 ultimate 64-bit, standard was vista 32.  one thing I noticed, though. the Rams are running at 667 mhz even though they are valued at 800, and I have absolutely no idea on how to change this. Publication of the research on some more and I think that the jury can also support 800 mhz fsb procies, might try that also later on. So far I am very satisfied with the improvement. Oh, to be on the safe side, be sure to upgrade to the latest version of the bios. mine was initially f.14, not f66a. problem solved!

• Compaq presario CQ40: compaq presario CQ40 on "Enter the password of power on password or administrator" is detected. Please

  Compaq presario CQ40 on "enter the administrator password or power on password"is detected. How can I reset it.

  Please help me.

  Hello

  Enter 46591280

  Kind regards

  DP - K

• Compaq presario Cq40 604 - tx: when the driver for windows 10 will be available for compaq presario Cq40 604 - tx?

  I want to improve my windows 7 to windows 10 but the windows 10 driver is not available for my computer compaq presario cq40 604 - tx.when driver windows 10 laptop will be available for this laptop?

  I think that HP has released/posted drivers for all models that will be supported. All have support do not at this stage are not likely to see them.

  Windows 10 includes a large number of drivers for the hardware older - but no way to know for sure before the upgrade. I'd certainly do Windows 7 recovery discs before you perform the upgrade.