CQ5110y - new graphics card not detected

Similar Questions

• Pavilion g6 2303 sh dedicated AMD Radeon HD 7670 M graphics card not detected win 7

  Hi, I have a g6 2303 sh laptop pavilion. I use win 7 x 64. I downloaded the driver for my videocard of 7670 M AMD Radeon HD hp page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=hu&cc=hu&dlc=hu&sw_lang=&product=5354...

  and after trying in vain for the amd home page. None of them does not detect my video card.

  This page only shows drivers hp for win8, which I won't use.

  Where can I find a driver for my video card?

  Thank you

  Tom

  Hi, Tom:

  Use the W7 x 64 drivers of th is model g6.  For graphics, simply use the graphics driver AMD, Intel, not one.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

• Windows, 3 beeps and new graphics card will not start

  Hello

  has obtained a HP p6-2105eo, windows 7. At a radeon HD 5670 graphics card that works very well. Bought a Gigabyte GeForce GTX650 2 GB. Can see screen start and seems it does not respond by clicking the Esc key. I hear 3 beeps with a delay of 20 to 30 seconds after each beep. After several minutes (2-3 minutes), the screen goes black with a command prompt flashes at the top of the screen on the left and nothing more.

  Think it might be damaged the card, so went to the store and got me a Gigabyte GeForce GTX660 OC 2 GB instead. The same problem.

  Also updated to the latest version of the available for my motherboard BIOS to: 2012-08-14, Version7.16 Rev A, 2.87 M

  Also already replaced at a 700W PSU, so that it can handle the best graphics cards.

  So, what could the problem with the recent graphics cards in this office?

  After numerous tests, such as reset cmos, bios reset, outside and inside with battery and so on... Nothing solved.

  Re-tested with the old graphics card and started immediately.

  After intensive research on Google, the BIOS is probably still too old to the new graphics card.

  Yesterday, I replaced the motherboard and the problem disappeared. Works fine now with the new card.

  Will use the older motherboard in an old computer instead, it isn't a total waste to replace.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Pavilion p6 - 2120t: Windows will not start with the new graphics card

  Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.

  HP Pavilion p6 - 2120t CTO desktop PC

  Configuration:
  Intel Pentium CPU [email protected]
  4.0 GB RAM
  Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
  Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)

  BIOS to Version 7.18

  Running:
  Windows 7 Home premium 64-bit w/service pack 1
  Two monitors (VGA, 1 digital port 1)

  Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.

  For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.

  I plugged both monitors to their connections voted on the new map.

  When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.

  The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.

  Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.

  Tried the above process two more times with the same results.

  I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:

  > Sources of boot UEFI

  Windows Boot Manager

  > Sources of boot legacy

  ATAP I CD/DVD player

  SATA2

  Hard drive

  SATA0

  Network controller (Realtek PXE B06 D00)

  PC using UEFI Boot Manager Windows boots normally

  I have not tried Legacy Boot Sources because I don't know which one to choose.

  I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18

  I know that others have had a similar problem but I have not seen a solution that works for my PC.

  Any advice would be welcome.
  Thanks for your time.

  Hello

  Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager.  I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.

  The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.

  

• p6745f: new graphics card does not start

  I have a HP P6745f I decided to update my graphics card because the default map is not compatible with Adobe CS6. So I bought a new power supply 600w and a GeForce 750ti. The PSU works fine with the original card, but when I put the new graphics card, the machine does not start. Just of is located on the blue screen and beeps every minute or so.

  I've scoured the forums and tried the bios update, but that did nothing. Any ideas?

  Ericz, welcome to the forum.

  750ti GTX requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer is released in 2011.  The latter does not demand of UEFI cards were 640 GT.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Computer does not start after installing a new graphics card

  I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.

  System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.

  Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me.  Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:

  1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?

  2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011.  And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?

  In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.

  Hello @Eric_Z,

  I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.

  Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:

  • A PCI Express x 16
  • Three PCI Express x 1 connectors
  • A PCI Express Mini Card x 1

  As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.

  Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.

  I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.

  I hope this helps. Have a great day and thank you for display on the HP Forums!

• HP Pavilion HPE: PC does not start at the top with a new graphics card installed

  I improved my diet to 600w and my new graphics card is a asus gtx strix 960

  My older gpu was a Geforce GT530.

  I've updated, drivers and BIOS of this HP Forum... and then I turned off my pc, took out the 530 and replaced by the 960. I start up the PC and it's me stuck on this screen. This photo is of online, that's exactly what mine looks like well. When I press "ESC to start menu", the screen goes black. the GPU and all good works. my version is v7.16

  

  only reason why I bought it was to play The Witcher 3...

  any help?

  calviiin wrote:
  

  Hmm. Looks like I won't get that. It's just another card that I purchase and its more expensive than the 960 gtx that I just bought.

  Thanks for the help.

  Don't, don't. It will be brick. They are also 2 completely different mobos. One choice is to buy a new motherboard or a new pc.

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.

• New graphics card.

  I want to buy a new graphics card. But I don't know if my motherboard or power supply could support. If someone could tell me if my computer can support?

  My computer is HP Pavilion a6098d.

  Link: http://h10025.www1.hp.com/ewfrf/wc/product?product=3379050 & lc = en & cc = us & dlc = en & lang = en & cc = us

  Thank you very much.

  HNH, here is a link to the "Product information" pages for your computer:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=29354 & LC = on & DLC = in & CC = US β = en & product = 3379050 〉

  The specs do not show the power of your diet, but from what I have seen that it is very probably 300W.  HP is not known for confusing their computers.  You can upgrade the video card, but it will be necessary to upgrade the PSU, probably also.

  While you're there, if you haven't done so already, upgrade to at least 2 GB of memory would help allocate.

• I think that I need a new graphics card for my Satellite M70 343

  Hello

  I had problems with my laptop. After a start-up time specifications and give a problem with the IALMRNT5 pilot report. The laptop also gives some display problems, after a certain time, then another graphic resolution is displayed.

  I have restored the software but is not a solution and also I downloaded the drivers from the Toshiba Support Site!
  I think the graphics card to give problems.
  Where can I buy the new graphics card?
  Installed: Intel 915GM/GMS, 910MS Express smart card.

  Hello

  It s not possible to exchange the VGA card in your system, since the VGA is soldered on the motherboard (the most important thing of your laptop on which all components are on) and if you have a problem with your graphics card then you should contact a local service partner authorized, due to a hardwarecheckup or a repair of your device.

  To find the closest just check the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Get a new graphics card for the HP Envy 700-214

  Hello

  So I tried to get a new graphics card for my HP Envy 700-214, but I'm not aware if this map is compatible or if it would have a negative impact on my system.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-750-TI/specifications

  I don't want my system to be harmed in any way.  Here is the link to the computer.

  http://support.HP.com/us-en/document/c04100558

  Thank you!

  Wolfking98, welcome to the forum.

  Here is the video card manufactured by EVGA.  It shouldn't harm your system somehow.  However, if you have trouble with the installation, you can contact their Technical Support (1-888-880-3842) or online.  They were very useful for me.  Read the reviews to see what users have to say about it.  As you can see, there are a lot of comments and appreciation 5 eggs.  You can't do better.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Can I put a new graphics card and power supply in my computer.

  Hey all, I have the model P7-1459 and it is good, but I was hoping maybe give him a boost of game. But I was not able to know if she could handle what I want to do. The new graphics card would require a 450W power supply, and I do not know if this model could handle. Anyone know of a way or another? Need help.

  Joshua, you are welcome!

  I'm sorry that I misunderstood your question.  I thought that you wanted to know if the computer would process the card.

  Yes, you can upgrade the power supply (PSU).  I suggest to measure the PSU existing and comparing these measures to the one you choose.  I love OCZ and Corsair.  They will provide quality amateur with a reasonable price.  A good video card requires a clean and stable power supply.  I recommend at least 500W; 550W at 600W would be even better.  This would allow for future updates.  The computer uses only the amount of energy needed to operate the components.

  I hope this helps.

  If your problem is solved, please click "accept as a Solution.

• My new graphics card

  Hello, I recently bought a new graphics card (EVGA GTX 660 SC 2 GB), it was my first time that I ever changed a computer and I had no idea how much research and time that you had to put in to see if your computer is compatible with the graphics card, you buy, then when he arrived I sent it to a store to get mounted and the man who was normal he said that power is not enough to manage the graphics card, so he tried with better food and still there is no possitive results so I was wondering if you could check my pc and see if a 660 GTX would be compatible with my PC Thank YOU! :
  
  Graphics card: http://www.evga.com/Products/Product.aspx?pn=02G-P4-2662-KR
  
  My PC:http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753461#! = form tab

  Hello

  Your PC needs a good 500 Watt power supply.  Review of the article below.

  Computer does not start after the installation of a video (Windows 8) card

• Pavilion p6 - 2020t: HP-Pavilion will identify the new graphics card

  Hello

  I got a HP Pavilion for a few years now and never updated my BIOS (not that I know well). I'm trying to install a new graphics (gtx 750ti) card and the computer does not recognize it. It shows the first screen, and then a black screen and a beep, then it crashes. Keyboard does not work, cannot get into the BIOS.

  I tried everythign with current BIOS, boot legacy and ensuring that the Integrated GPU is disabled, and nothing works. I also did research on food, and but it is not terrible, it should work with this graphics card (the fan even spinning).

  According to my research, the current BIOS is simply not recognize, and I need to update. My current version is: FRIEND 7.16, 05/10/2011

  I navagate through the HP website and it said that the automatic update should update the BIOS for Windows 10, and it won't let me download all drivers (although the last BIOS update was 2011). I tried to enter the FRIEND's site and download it from there and it won't even install their drivers, it says that flash is not supported (probably for Windows 10).

  If someone could give me an idea of how can I get a newer version of the BIOS for my motherboard, it would be much appreciated as I'm pretty sure that's the reason why the computer is not recognizing the new graphics card

  The risk is that the video card is one that is for a newer PC with an EFI BIOS. That's why the empty card is not recognized.

  If you use a card equipped with a switch on the virtual card allowing the use in legacy and uefi BIOS it will work with the BIOS of your PC.

  Sapphire makes video cards that have this capability. Take a look at the catalogue. What you need is a PCIE x 16 card video with switchable legacy\uefi BIOS or legacy support, but not only UEFI.

  http://www.sapphiretech.com/catapage_tech.asp?cataid=8 & lang = eng

  You cannot change the type of BIOS that your PC has in the UEFI.  It's a question of his being of a generation of diferent from the PC.