Cq58 Compaq: Compaq CQ58 - device to boot not found

Similar Questions

• Presario CQ61 - device to boot not found, say there is no hard

  Hi, I bought my hand 2nd presario CQ61-405AX about a year ago and it was almost new, my laptop was working fine and then it froze and so I had to switch off, once I waited 30 min for it to thaw, now, when I boot it upward, apparently with a black screen with error

  "Boot Device not found.

  Please install an operating system on your hard drive

  F2 system diagnostiscs.

  I went on hp support and followed the instructions until he did a test drive and the error, 'Hard disk not exist' appeared

  I have no idea how to fix this, I am running Windows 7 Home premium and I'm afraid that I might have to buy another hard drive

  Thank you in advance

  Hello

  Unfortunately it looks like the drive didn't, if the replacement is the only option left.

  Kind regards

  DP - K

• device driver Bluetooth not found in windows 7hb update?

  I have not found a bluetooth device driver so please help...

  /

  Hello

  1. What is the number of brand and model of the computer?

  2. What is the message code error that you experience when you try to use the Bluetooth software?

  3. what was the recent change in hardware or software performed on the computer before the question?

  Please follow the steps mentioned below to help solve the problem.

  Note: Follow the troubleshooting steps in order of effective troubleshooting and compatibility checks.

  Method 1

  Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

  http://support.Microsoft.com/kb/2654568

  Method 2

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-my/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Refer,

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps.

• I hate my kid? Peripheral Windows7 to boot not found etc.

  Leave my laptop for my 28 years.  He came back with a completely black splash screen; with the disturbing message: not found boot device.  Please install an operating system on your hard drive.  I hate my child!

  It is unlikely that it was his fault. These things just happen. Frequently, there may be corruption of the BCD of Windows bootloader that is causing this or a faulty hard drive.

  What you need is an installation of Windows 7 DVD or usb to the same version that is installed. Demarrer start on it, and then select Startup Repair.

  If you don't have that should have and created a set of recovery disks or recovery disk support, you can use that as a last resort. The Recovery Manager will return your laptop to a good working state, but it will delete all data on the hard drive.

  Help us help you by displaying the following information.

  1. the complete model number and the laptop Nr - see web document this HP if you do not know how to locate the product number or model number.

  2. the full version and the name of the operating system you use (IE Windows 7 64-bit).

• Satellite C660 - 2 EV starts plus-Boot not found Bishop

  I don't know how but my grandson has seriously broken the Satellite C660 - 2 EV

  Boot from the disk - Boot Mgr not found

  Boot from the recovery partition - Boot Mgr not found.

  Boot from an installation (generic) Windows 7 disk - boots, begins to install, finds, he does not have a required driver (but don't tell me what it is). Allows me to access the drives C:, D:, E:, and X:

  Boot from recovery Toshiba DVD. White bar gets about 25% on the whole of the screen then stops with "You have removed a USB support during installation" (or something like that, laptop currently in pieces).

  Removed and replaced the memory and DVD player. Removal of the HARD drive connected to my PC via the USB adapter and scanned the two visible partitions (300 GB each) at the level of bad sector. No problems.

  Help! I'm out of options.

  Laptop must be functional (basically) as it starts from DVD (non-Toshiba).

  HARD drive seems OK when verified externally and start (Non-Toshiba)

  What remains?

  Everything that you have done is good, and I would do the same tests.

  The value of the default BIOS and test it with another HARD disk, if you can get one for testing purposes.
  I can't say for sure, but somehow, I feel THAT HDD is the troublemaker.
  Try installing the DVD of initial recovery on the new HARD drive.

• No device driver Bluetooth not found

  I use blue Cambridge Silicon Radio, but the device bluetooth device no drivers found it please help me?

  I have a new Toshiba Tecra z40 and try to install my bluetooth devices on this machine running Windows 7.

  My bluetooth devices are Sony SRS X 3 and Plantronics PLT - M50 - it used to work on my older Dell, who is also running Windows 7, but not run in an error 'Device Bluetooth - no driver found' in the installation of the driver software screen.

  Sony and Plantronics did not require the installation of device drivers previously and their sites Web says no s/w needed to be install.

  Thanks in advance for your help.

  Michael

• Device USB-6009, not found problem

  Hi all

  So my VI and USB-6009 worked fine until recently.  I noticed the VI was read or graphing correctly the analog input channel information.  My firmware is up to date, but I noticed a problem.  In Isdaq, he will recognize the USB-6009 case is connected, then when I start my VI and to stop it, I double check Isdaq for my device and it doesn't recognize any device.  I have to unplug the daq and reconnect to Isdaq to recognize the usb-6009 case again.  But whenever I start my VI, it does not collect all the data and makes the unrecognizable device.  Do you know what could be the problem?  Is attached the VI I ran in case you want to watch.  Its working fine so far.

  BTW, I'm under Labview on Mac OS X

  Thanks for the help!

  Hello Solis,

  I recommend you to make changes to the parallel tasks to use the cluster of the error to force the order of execution, given that NEITHER-DAQmx Base is not multi-thread safe (review NOR-DAQmx Readme). Please check if this alleviates the problem.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

  www.NI.com/support

• Satellite C850 - Bluetooth device driver not found

  Hello

  I have laptop Satellite C850-c019 core i3 and in Device Manager, I saw device driver Bluetooth not found.

  Please help me in this regard.

  According to the specifications of the laptop this model laptop was offered without an operating system preinstalled. Which you have installed?
  You have installed all necessary drivers, including software of BT stack?

• Not found audio input device

  When you record a voice on the audio input device says iphone not found. In the micro-life the iMovie app does not appear. What should do?

  Thanks Pierre

  Hello Peter,.

  Thank you for using communities of Apple Support.

  I see that your internal microphone is not recognized in iMovie on your iPhone.  I want to start that you please leave the app iMovie and then restart your iPhone.

  iOS: force an app to close

  Turn your device iOS market (reboot), then reset

  Take care.

• Latitude E6410 Mobile broadband device not found

  Hello

  Could you please help me

  I have an E6410, install the sim card, load and start the Service Manager Broadband Mobile and it say an error "device wide band not found Mobile".

  I already download and install drivers for Broadband Mobile Wireless, two of them (5620 and 5540 mini-map) I really do not understand how to determine which of them installed in my laptop. Y at - it an idea?

  Thanks in advance

  PS Sorry for my English

  Hello, I have the same problem, I used the Dell Mobile Broadband utility and run the self diagnostic, and the result was down: HardwareTest. I guess that the unit is not installed or not connected to the motherboard. How can I activate this device? There must be a setting in the BIOS, or something is not pluged in correctly for this laptop. also, mine is a Latitude E6410 with Win7.

  I saw no response for this post.

  Please, the USB Modem is very annoying.

  Best regards

  Juan Carlos

• AUS auto fill device seems to not work.

  I'm running CSM 4.0.1 and followed the instructions on the use of CSM for updating a filewall ASA5540 through aus I created a policy to the CSM AUS IP address and credentials and chose "Peripheral" to deploy on.

  Page 1-3 of "Getting started with AUS", he says: when you use the Security Manager to deploy to a device via AUS configurations, the device is automatically added to inventory AUS once the device contacts successfully AUS and retrieces configuration. This is the normal method for adding devices. »

  FSU fails the attempt with this error message:

  CALLHOME-DB-DEVICE_NOT_FOUND: the Record for the unit with the remote control-ASA-1 ID is not found. Action: Make sure that the device has been added to the FSU and the configuration of device contains the appropriate device ID.

  And ASA (8.4.1) with active debugging device, displays this error msg:

  Client to remote-ASA-1 # Auto-update: DeviceDetails Envoy/setting to automatic update / AutoUpdateServlet of the 164.72.44.162 Server
  Auto-update client: treatment 164.72.44.162 Server UpdateInfo
  Auto-update client: failed to contact the: https://164.72.44.162/autoupdate/AutoUpdateServlet, reason: ErrorList error code: CALLHOME-DB-DEVICE_NOT_FOUND, description: save for the unit with the remote control-ASA-1 ID could not be found.

  He denounces the device ID is not found. But the host name of the ASA is identical to the device at the WSC ID.

  Is there something I'm missing or not do to make this work?

  Hello Jeff,.

  There are few things to make the FSU work, we will try to list and make sure that we have everything in place.

  1. we need to set up the device to let do via CSM aus:

  in the peripheral view select your firewall and configure your AUS server via

  Device Admin-> server-> AUS

  The ip address will be the same that the CSM and credential even allows you to connect to the server of CSM

  2 - deploy to the ASA to ensure this is the config AUS. The deployed config should look like:

  Auto-update hostname device id
  source/autoupdate/AutoUpdateServlet auto-update server https://*@

  3. ensure that the hostname of the device is EVEN under the display name in the CSM (you can check by right click on the device and click Properties of the device)

  4. we are now ready to set up the AUS server. Right-click on the device and select properties of the device. In the automatic update (bottom) section

  Fill in the fields by putting all the necessary information. The ip address and server name must be the same as the CSM (AUS runs on the same server)

  and the credentials are the same used to log in to the GUI CSM and used at the point 1

  5 - once this is configured, you are ready for the first deployment. It is important to deploy just as the CSM must create the right configuration file on the server of the FSU. After the first installation, you should be able to see the device listed in the portal AUS (under devices)

  Let me know if it worked.

  Stefano

• base system device driver is not not in Device Manager

  original title: my laptop is dell vostro 1015 and windows 7 ultimate, but there is no .based peripheral system for this problem .please help a driver in Device Manager

  my laptop is dell vostro 1015 and windows 7 ultimate, but a driver in Device Manager is not found .based system device .please hel [p for this problem

  It took me a while, but eventually it worked... it's the card reader!  See here for the driver:http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=VOS_N_1015&os=WLH&osl=en&catid=&impid=

  You'd be surprised how many messages there are on the internet for the same problem, and 99% of them are Dells!

• (driver not found bluetooth device driver) what is it?

  m using iphone 5. I want to connect to my computer hp laptop via bluetoooth. but whenever I tried it shows the error this device not found bluetooth... driver where can I download this driver? Please help me solve this problem...

  Hi Mashoorbrar,

  You can read these articles and check if that helps.

  Error: "device driver Bluetooth not found" when you try to connect a bluetooth device: http://support.microsoft.com/kb/2654568

  Please refer to the answer posted by 'FoxFifth' of this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/iPhone-3GS-will-not-connect-via-Bluetooth-to/48b255bb-3f20-4EBF-A116-e9448e06649c?msgId=252b8d65-1eb1-413F-A143-f52f0c719897

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Get a Bluetooth device message"driver is not found when you connect Bluetooth

  original title: Bluetooth connectivity problems

  Hello

  I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

  Hi autumnv92,

  Were there any changes made to the computer before the question?
   
  Check out the following and check:
  Method 1:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

   
  Method 3:
  See the following steps:
  1. turn on your bluetooth device
  2. right-click the icon for the device in the system status bar
  3. choose / click on "show bluetooth devices.
  4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
  5. simply remove from the list.
  And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
   
  Method 4:
  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  
   
  Also check these links for more information:
    
  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   
  Hope this information helps.

• Device driver not found

  I have reset my laptop back to factory condition and now I am unable to connect bluetooth phones to my Windows 7 Home Premium. He repeats to me "DEVICE BLUETOOTH, DRIVER NOT FOUND." Before it was all I had to do reset has put my dangle bluetooth to the laptop and I would be able to send and receive files to and from my phone to my laptop. How can I fix this problem?

  Hi Dreworl,

  I would recommend that you follow the steps in the article and check if this solves the problem.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  http://support.Microsoft.com/kb/2654568

  Let us know if that helps.