Crash after 7 pro upgrade to 10. Restarts continually. all lost

Similar Questions

• Portege Z830 - 11J - several questions after Win8 Pro upgrade

  Hello

  I bought a Portege Z830-11J with Windows 7 Pro.
  I bought the Windows 8 Pro Upgrade and did a very basic * clean installation *.

  I installed the Windows 8 Pro from scratch a (empty) disk.
  I checked for missing drivers Device Manager.

  I did a download for * Windows 8 * drivers with my serial number.
  I extracted only the drivers for the device and didn t installed all the additional software.

  I installed the drivers from package 3grdv-20120119182104 H5321gw
  I installed the drivers of the fingerprint of the fp - so package - 20121025114331
  I installed the drivers from package bltstk-20121015121744 bluetooth stack

  all drivers and windows 8 are 64-bit.

  The installation of windows has no update and the power management settings are by default.

  After 30 minutes, the ultrabook goes into deep sleep, led power mode fading slowly. all right.

  Sometimes the ultrabook wake up, if I press the power button and all is well.

  * BUT not to every time the ultrabook will wake up! **

  If she woke up, the Black Guard screen won´t, there is no video on the VGA port.
  The keyboard lights up if press and that s all the.

  If I Don t to power down (press power button very long), the hot get extrem ultrabook to the position of the cpu.

  Can someone help me with this problem?

  BIOS is 1.70

  Help...

  Hello

  I agree with Akuma, some Windows 7 drivers are compatible but many drivers Win 7 problems to Win 8.

  In addition, you should try to turn off the laptop, press Windows key + X and then choose stop.

  The point is that Win 8 be hybrid mode if you n t press Win + X key so that closing.

  Here's a tip:
  + Perform a complete shutdown in Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• Outlook 2007 hyperlinks does not work after Windows 7 Pro upgrade Vista Business

  I have just upgaded my laptop Sony Vaio VGN-Z750D of Vista Buiness Wdows 7 Professional. As pa of the upgrade process, I uninstalled Google Chrome as directed by the instructions to upgrade.  IE has been and still is my default browser.  Immediately after completing the upgrade process to Windows 7, all hyperlinks email from Outlook 2007 stopped working, and I get an error message: "this operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  I am the administrator.  IE is the default browser.  I spent the value by default, Safari and back to IE, but no change.  I looked at several forums, but none address this issue more specifically to the Windows 7 upgrade.

  Please notify.  Thank you.

  Perfect.  Worked immediately.  I downloaded the files added to my registry, and the problem was fixed immediately on reboot.  Thank you.

• win8 home premium to pro upgrade, says Intel wireless driver is not compatible

  I have a new desire 4 with Windows 8 home preium ultrabook installed. I am trying to install the Windows Pro upgrade, who refuses to continue because my wireless software is invalid for Windows 8. I installed a later version on the Intel website, makes no difference. I tried to remove the offending software and restart and still objects.

  Thanks for the tip, Paul. I've never had this problem with an upgrade of Windows before. I think that really he should let me come up with it and just warn me that he thinks that there is a problem. I see that I am not alone - this is someone with a Dell - http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/unable-to-install-windows-8-pro-due-to/cf6e74c5-caa3-4089-a056-c55f4e64703d. Anyone here with a Sony Vaio - http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/unable-to-install-windows-8-sony-vaio-vpceh-when-i/0103bfaf-b2ea-4e80-90ca-69b9fea944cf. Intel suggests to remove all the Wifi drivers before moving on to Win 8 (http://www.intel.com/support/wireless/wlan/sb/CS-033854.htm). The instructions are here - http://www.intel.com/support/wireless/wlan/sb/CS-030416.htm. He suggested deleting the app settings, which I don't. My solution was simple - I was really taking the wrong approach. I wanted to spend 8 Win Home Premium to Win 8 Pro and I was using the Windows 8 Pro pack which includes the 32-bit versions and 64-bit disk. They are intended for upgrading from a previous version of Windows to people. I need to take a different approach and "add features to Windows 8", which does not require a disc, as all features are already in 8 Win Home premium, they just need to be unlocked. All's well that ends well, as they say!

• Trail test since lightroom cc stopt / crashed after booting directly

  I have download the trail for fotograf. After the instalation I want to test the version of Adobe LightroomCC. But after you start the program, it crashed after a few klicks. I restart the computer several times in a few days. But it does not work.

  Yes, it could be because of the graphics card.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom and check again

  In addition, refer to this article: https://helpx.adobe.com/lightroom/kb/lightroom-gpu-faq.html#Troubleshoot

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• IBooks on ipad pro crash after IOS updated with 9.3.1.please

  IBooks on ipad pro crash after IOS updated with 9.3.1.please

  I have the same problem after update 9.3 OS on my Ipad 2... Crashing in IBooks. PDF and missing books. I have access to my books for about a minute before it crashed.

  It still occurs with the 9.3.1 update.

  I don't really know where to go then except put it there the 9.3.1 upgrade did not fix my problem.

  Thinking that I might have to consider for an Apple Tech which is an expense I really don't think I should have to bear, because I did not cause the problem that everything worked fine with my iBook before upgrading the OS 9.3.

  Thank you

• Illustrator crashes after installation of Nvidia GTX 970 in MAC Pro

  Hi all

  Please notify this problem, it would be a great help.

  After installing a new Nvidia (EVGA) 970 GTX graphics card in my MAC Pro system, Illustrator crashes all the time (random, always on "save under", sometimes on opening the files). Everything works fine in the systemand the new card works really well. However, Illustrator is essential for my work, so I need to find a solution.

  Here are the specs:

  19.2.1 Illustrator

  OS X 10.11.4 (15E65)

  NVIDIA driver: WebDriver - 346.03.06f01

  CUDA: cudadriver - 7.5.26 - macos.dmg

  MAC sytem:

  Model identifier: MacPro5, 1

  Processor name: 6-Core Intel Xeon

  Processor speed: 3.33 GHz

  Number of processors: 1

  Total number of hearts: 6

  (By heart) L2 Cache: 256 KB

  L3 Cache: 12 MB

  Memory: 32 GB

  Processor speed of interconnection: 6.4 GT/s

  Boot ROM version: MP51.007F.B03

  Video card:

  Chipset model: NVIDIA GeForce GTX 970

  Type: GPU

  Bus: PCIe

  Slot: Slot-1

  The PCIe track width: x 16

  VRAM (Total): 4 095 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x13c2

  Revision ID: 0x00a1

  ROM revision: VBIOS 84.04.36.00.70

  Thank you very much in advance!

  I installed this... >

  NVIDIA GeForce GTX 970 4096 MB

  in a cheese grater old mac pro as you and it is a festival of crash in .ai and I would be interested to know if you are also experiencing photoshop bail out completely if you try 'resize' an image?

  I tried several other drivers of web that improved things but always authorized random crashes,

  so...

  the only solution that I found (and that's a total of "fix" as abel to get one with some work again finally!) is to disable the gpu acceleration in preferences (not only temporarily using the rocket button or the Preview on CPU option in the menu (, but a STOP appropriate in the Preferences section, same "fix" has been used in Pshop to make it usable as.))

  I was worried that it would mean a totally unnecessary 'upgrade', but coming from a 1 GB card, everything seems still to be a lot better and faster despite disabling the GPU acceleration, perhaps simply because the operating system and all other open applications (not adobe) are able to use the GPU at least partially? and which allows a little more resources elsewhere. Anyway, this isn't a total waste, and I can now work on files that have been previously direction buy me a new imac instead of the mac pro upgrade one last time... (which turns out to be a blessing, because it seems to imac users have problems too).

  the 'upgrade' was essentially a downgrade effect for me in the aftermath, as even though it have 4 x the power of the previous card, Adobe have totally ruined the options found in the application, which means that what was once a system (even with 1 GB) which was capable of an overview of the 'real time' virtually no matter what if you waited so that it runs through a reading of frame by frame 'green line '. , has now turned into an application that can only run previews in real time by jumping the executives, it's a joke...

  hope get you it sorted, and I hope that nvidia will give us more options driver soon?

  or adobe could remedy the situation! Ha ha, that's a good joke to put end to now I think...

• Satellite Pro A210 PSAFHE - Windows 7 - crashes after the sleep/hibernation

  I have a PSAFHE Satellite Pro A210 running dual boot Windows XP/7
  With the help of Windows 7 - 32 or 64 - system always crashes after sleep/hibernate mode.
  This never happens with XP that sleeps and hibernates OK...
  There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  I like system 7 and use it on my other computers but without sleep/hibernate, I go back to XP.

  Hello

  > There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Sorry, mate, but you're wrong.
  All drivers for Win 7 for Satellite Pro A210 are available on the European driver of Toshiba page that I recommend you check out once again

  Given that this question does not appear using Win XP, I can say with certainty that this has nothing to do with the material, but it s a software related issue
  I recommend updating the graphics card driver

  In addition, there is a new BIOS for Satellite Pro A210 PSAFHE it s v2.0
  Check if you are using the latest version

• Z400 disks with EFI partition not mounting after the Windows 7 Pro upgrade

  HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

  I thought about it... after two weeks of puzzle, I finally found the cause.

  I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

  But wouldn't be INCE if Windows reads discs mac natively?

• Hard drive crashed after upgrade to Windows 10 Windows 7

  * Original title: HARD drive Crash / Win7 for 10 Upgrade... bad timing!

  I have a PC running OEM Win7 x 64... just did the free update to Win10 a few days ago. HARD drive just crashed hard. I did an ISO when I upgraded to Win10. I'm trying now reinstall on another HARD drive... and no matter if I use Win7 OEM drive or ISO Win10 disc, it tells me that the activation code is invalid. I was under the impression that, as long as the mobo (and everything else except the HARD disk) is the same, Windows will allow you to reinstall with the key?

  Any help is greatly appreciated!

  Scott

  After the upgrade to Windows 10, you cannot use your Windows 7 or Windows 8/8.1 product key.

  Click on this Later.

  

  Continue to use the chat support instructions

• Adobe first Pro CC crashes after update

  I have read similar discussions of crash during launch with Premiere Pro (cloud), but I've exhausted all the suggestions. Works on a Mac, I have downloaded the latest update, rebooted the machine, disconnected Adobe Cloud, recorded in Adobe Cloud, checked my read/write permissions in the (good) library, and restarted again. It seems that first will launch and will watch the window of loading on the screen, but it crashes. Adobe Photoshop and Lightroom start without problems. Any suggestions?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Crash after upgrading to Workstation 10.0.6 - 2700073

  Upgrade to 10.0.6 - 2700073 this morning, and workstation crashes as soon as I start it.

  The details are in the attached ZIP file:

  -capture of screen crash

  -captures of three log entries of applications to screen the accident events

  -vminst.txt, which has been updated at the time of the accident

  The .xml file that is mentioned in one of the entries in the event log does not exist on my system.

  I'm running on a host Windows 8.1 and have been running earlier versions of workstation for more than a year on this PC.

  PC is a Lenovo Thinkpad T503

  I'm going to uninstall this version and try to reinstall the previous version.

  Someone at - it ideas about the cause of these problems?

  Had the same problem of crash after the upgrade and after some research I found this post which gives a few details why the crash occurs.

  To solve the problem simply do the following:

  Find the file libcurl.dll in your VMware Workstation installation folder.

  (I found 3 cases on my machine windows 8.1)

  C:\Program Files (x 86) \VMware\VMware Workstation\x64

  C:\Program Files (x 86) | VMware\VMware workstation

  C:\Program Files (x 86) \VMware\VMware Workstation\OVFTool

  Make a copy of the files in the first 2 files with a modified date of 04/28/2015

  Replace with a copy of the file in the 3rd record (\OVFTool) before the date last updated on 02/04/2015

  Start VMware Workstation

  This fixed the issue and no uninstall or reinstall required, I tested and did not have any issue.

  I take no credit for this that the problem was discovered in the post below, which has more details on the exact cause.

  http://blog.rewolf.pl/blog/?p=1167

• First Pro crashes after you quit - Mac OSX Lion

  Greetings,

  Symptoms:

  I have a behavior coherent crash after quiting Premiere Pro (version 5.5.1 and 5.5.2). The complexity of the project does not seem to matter, and once it crashes, I get the prompt indicating that the application has encountered a serious error and will try to save the project. I then get the usual prompt to send to apple crash report, followed by the crash adobe report a few minutes later (must be why I see "dynamiclinkmanager" at the top for a bit after PP crashes).

  If I reopen it PP, I am prompted with a dialog box asking if I want to the last open project. If I say yes, I'm back in a crash before any active load (unexpected serious error and the will of the app must close) followed by accident yet for apple and adobe reports. Basically, I have a chance to do a project and it spoil when the application is closed.

  I am using an installation from a DVD, but had also tried the web version. I was able to create a project to couple with the web version (trial) and then when I got the DVD, I believe that I used for the update/authenticate, etc. - maybe it's where things went south (everyone is a similar trend?).  I don't think that too many mix the contents with the installation of web, DVD so the steps around how I mixed the two sources is somewhat blurred.

  For reference, I am pasting the online crash report. To reproduce, I just had to open PP, click on no when asked to open the last project of unexpectedly, and then just quit and got the crash. I didn't do anything other that accept the default values for the project in order to try to hit command-Q.

  If I can give you more information to help a repro, please let me know.

  Any help is appreciated and thanks in advance.

  Todd

  < < start crash report > >

  Process: Adobe Premiere Pro CS5.5 [280]

  Path: / Volumes/VOLUME / * / Adobe Premiere Pro CS5.5.app/Contents/MacOS/Adobe Premiere Pro CS5.5

  ID: com.adobe.AdobePremierePro

  Version: 5.5.2 (5.5.2)

  Code type: X 86-64 (Native)

  Parent process: launchd [126]

  Time/date: 2011-12-08 21:42:17.998-0800

  OS version: Mac OS X 10.7.2 (11 C 74)

  Report Version: 9

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  objc [280]: garbage collection is OFF

  terminate called without exception active

  Abort() called

  Post edited by: Jeff Bellune.  Edited for brevity.

  Perhaps due to some of your other installed?

  Given that I started this thread, I had very recently PP5.5.0 working on Lion, even w / my ATI card and it turns quite stable. I need to test more but given that the PP is the only 3rd party something on this installation of the OS and it is inconvenient to change the startup discs when I want to use other applications.

  I ended up doing dmg at each point of restoration during debugging, i.e. after the new installation of OS, then after installation, PP, etc..

  It's a bit easier to go back to the last known good state, if I got in trouble.

  I can also test updates to Adobe, but w / stability given, I (fingers crossed) not sure I want to update something that is not broken. Same w / disk images to speed things up, I'd rather be in the mix. I'll eventually do this, but right now, I enjoy being able to use PP.

  Hope that helps, I'd back things until it works, or bring up the place, make images along the way and see where things break. I'm not sure how invasive is a facility (e.g. it is really all the reversible effects) and without a new installation of the operating system as starting point reliable, I am sometimes wary of some persistent pref/dependence silently screwing things up (for example after uninstall/reinstall, same behaviour). It is a PITA, but so is the major downtime.

  Let me know if I can give you any other details/info.

  BTW, I have not mixed AE w / PP installation, but I intend to. Other major software I want to have on this installation of the OS are Digital Performer, but that will have to be on another image.

  see you soon,

  Todd

• First pro CS4 crashes after loading project, any suggestions?

  He used just crashes and I just would open first back and it would eventually charge and be ok. Usually take two would be trying to load. But now it actually crashes my computer! I can get it to load after several attempts, but waiting for restart my computer isn't cool! I am running XP proffesional.

  Thanks in advance

  A few times, he must focus on the many different possibilities and then throw those that do not apply, or do not resolve the problem. Often it strikes immediately, but other times, a lot of detective work remains to be done.

  Good luck

  Hunt