Crash course or install, configure and manage?

Similar Questions

• Suggested knowledge to install, configure, and manage class V4 exam VCP

  Hello

  I'm relatively new to the it field, just graduated from College, and I really want to work to become a VCP.

  I'm looking to take the class install, configure, manage V4 some time next month, and I was wondering what do I need in terms of knowledge required to take full advantage of this course.

  Thank you for your help and your insight,

  Bao - Tran

  vSphere documentation is here: http://www.vmware.com/support/pubs/vs_pages/vsp_pubs_esx40_u1_vc40_u1.html

  Evaluation software is here: https://www.vmware.com/tryvmware/?p=vsphere

  And you can be aware of the wider infrastructure (SAN/NAS/network) the best

  Scott.

  -

• Is VMware vSphere: install, configure, and manage a must for the VCP4 certification of the course

  Is it possible to learn by myself and then pass the test. I really want to take the exam, but don't have four full days of training. Can I read onlind documentations, as well as working with VMware VC and ESX servers, so I have no chance to proctise. Thanks in advance!

  Yes, you must take an official course of the exam!

• Configuration and management use cases

  Hello

  In my opinion, this tool provides the ability to examine those corresponding to results that must be validated and then, I think, it helps the end user, take action. My question is: what are the actions that the user could take?, more precisely the user can manage the fields of candidates corresponding to generate a gold record?

  In addition, I'm looking for resources/documentation to configure and use the management interface of the Disqualification case. I would like to know how to set up a process of Disqualification to trigger alerts on case management interface and assigning it to a user.

  Thanks in advance for any help,

  Kind regards

  Daniel

  Hi Daniel,.

  Direct manipulation of data is not currently possible in the implementation of case management. The only actions are:

  -Change the State

  -Add a comment

  -Add the attachment

  -Change the value of the extended attribute

  Kind regards

  Nick

• CIMC - configuration and management on the side of the BONE

  Is there anyway to manage the MMIC operating system (as it is with HP ILO)?

  Tim,

  Actually, there is a tool (UCSCFG) that will allow you to configure certain settings BIOS and MMIC operating systems supported.

  See below for more information on UCSCFG.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/ucsconfig/install/b_ucscfg_utility.PDF

  Steve McQuerry

  UCS - Technical Marketing

• V4 install, Config and manage the filled - VCP4 or VCP5?

  I have all. We currently use ESX 3.5 in production but not strongly. I don't have a VCP certification. I have a V4 certificate of completion to take the class in 2010. I was wondering if I should continue the VCP 4 or take the vSphere 5: then what's new secure Channel 5 review.

  Most of my virtualization has been done under Hyper-V.

  Details: I do not hold a VCP4 certification. Just the end of the class.

  Hello and welcome the Forums!

  I take the VCP4 exam and then go from there.  The What's New will not achieve the qualifications if you're not already VCP4

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• VMware vSphere: install, configure, manage [V4] still applies for VCP 4.1

  Hello everyone

  I took the VMware vSphere: install, configure, and manage 09/09...will the course of the class

  to apply for the exam for VCP certification?  If so how much time I have left with remaining

  eligible with this class to take the test?

  Thanks in advance...

  Your course was based on 4.0 at the time, the current VCP4 exam is not 4.1 specific as such, if your course still qualifies you for certification. VCP4 is specifically "VCP on vSphere 4", not 4.0 or 4.1.

  Get the review plan later, the study of literature 4.1 (in the case where VMware is updated the review of some elements specific to 4.1) and use the convenient software either 4.0 or 4.1.

  Scott.

  -

• Install Fax and scan component. Followed the instructions, but there is no 'SCAN of WINDOWS AND FAX' checkbox in the "WINDOWS FEATURES" window

  I followed the "install, configure and send faxes in windows vista" page, but there was no "windows fax and scan" box in the pop-up "Windows features". I have a modem-fax HDAUDIO soft data installed.

  You don't say what version of Vista you have.

  http://www.Microsoft.com/Windows/Windows-Vista/features/fax-scan.aspx

  Home editions of Vista have NO FAX features.

  You need 3rd Party Software: http://www.snapfiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon.

  Mick Murphy - Microsoft partner

• Not enough memory RAM for EDU-ICM-1301 - VMware - SAMPLE Training Services - on request in the system class: vSphere install, configure, manage course 5.5

  Hello

  I'm looking for the laboratory "EDU-ICM-1301 - VMware education Services - SAMPLE - in class on request: vSphere install, configure, manage course 5.5" but trying to follow the instructions

  LabFiles\vCenter GA Installer

  3. Double-click autorun.exe , click run.
  4. If the security warning dialog boxes appear, click run to continue.

  the installation does not work with because the memory is not enough.

  Have you ever tried this workshop?

  You have a solution for this problem?

  Thank you

  Hello

  Yes we have seen several times.

  The simple solution is to install ONLY the Client vSphere and not all vCenter Server.  Specified in the manual, but it is up to the user that installation of the client is the option left on the halfway point in the Setup user interface.

  Thank you.

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• Fact the VMware vSphere: install, configure, manage [4.0] class eligible for VCP5 prereq?

  Hi all

  Doing some research, but has not been able to confirm.  Also left message with our VMware training rep areas last week, but never heard back, so thought I would try here.

  In 2011, I finished the VMware vSphere: install, configure, manage [4.0] courses.  I never did get my VCP4, but now want to try for my VCP5.  This class would qualify as a prereq so that I can just take the VMware vSphere: What's New (version 5.0) courses?  The web site called specifically need to VMware vSphere: install, configure, manage [V4.1] class so I think not, but I wanted to check.  I would take the shorter, which is the new class rather than a class 4 or 5 days on vSphere 5.0 so I can.

  Can anyone confirm?

  Thank you

  Bob

  No problem, this path has always been available for VCP5.

  And Bob, the counties of 4.0 class, as well as class 4.1 - is only the class 4.1, which is referred to as the class 4.0 retired some time ago and has been removed from the page VCP5 when he retired.

• Overheating and crash on the A60 - 122 power management

  Sorry for the bad English - my native language is Russian.
  I have a few problems:

  #1 when I run any graphical application lasts (as any games full screen)-I get a trouble - front near the screen becomes very hot - I think it's a video card problem, because I saw this sentence only at games or use Photoshop. How can I solve this? Have Satellite A60 - 122 functions q - fan (like ASUS motherboards) and how do I access it?

  Utility power management #2 - hangs at each performance of the OS and crashes when you try to uninstall.
  What can recommend you on these issues?

  Thanks for all the answers.

  Kind regards
  Alex.

  Hello

  #1 with this number you can do anything. If it's really hot, you can call service toshiba partner and ask if it would be useful to analyze the material.

  #2 you tried to install the new management tool of power 'on' non-functional existing power management. It may be that the new installation fix the existing!

  Good bye

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.