Crash error NavigationPane on Simulator of Q10

Similar Questions

• Error in the Simulator

  There seems to be an error in the Simulator running 5.0

  Simpackage 5.0.0.451_9600-Vodafone - 9500

  Message CallManager.phoneEventNotify(int,int,Object) line 1087 NullPointerException

  When I do:

  Invoke.invokeApplication (Invoke.APP_TYPE_PHONE, pa);

  And is not possible to catch him.

  The strange thing is that if I press conytinue on the error screen, it seems to work. This error sometimes more than once, but finally it stops.  I can't click response on the call of Simulator before I spent the ortherwise errors of my hook for "Call connect" does not take effect.

  and you get this error on a normal phone? Laughing out loud

• LabVIEW 8.6 - cannot save or change vi. crash - error-

  Hello

  In the last months I was constantly using Labview to perform
  some data acquisition and treatment of the relevant signal.

  Today, however, I can not get anything because of a series of errors.

  When I open my last (attached) vi, it works very well - if I try to change
  at all and then run it - the program crashes and closes.

  If I first try to save it after change before the race - I get a popup
  message with "Save error Code 5: bunch of comics '"

  I read the message in the discussion about this - and
  tried to improve all relevant information, but nothing helped.

  I tried to copy across a new vi, but no joy.

  I've also attached the last error log - in an attempt to understand
  what goes wrong.

  Thanks in advance

  Skyguy

  I was able to open in 8.6, edit it and save it, with no crashes. I have attached a version re-recorded for you (with the MathScript node is eliminated). See if this can be changed without accidents. You will have a much easier to do faced with this VI if you clean code and a large part of the functionality consolidate as I explained.

• Explorer Crash: Error 1000 at the address 0x4ec683bd

  Hello!

  At first, I have to say my system was running stable and was clean.

  A few days ago I had to reinstall Windows Media Player 11... do not lose the patches and updates for WMP11, I have uninstalled and reinstalled the updates (windows.update) after the new installation of WMP11.

  List updates removed:
  KB936782Uninst.log
  KB954154Uninst.log
  KB939683Uninst.log
  KB952069Uninst.log
  KB973540Uninst.log
  KB968816Uninst.log
  KB954155Uninst.log
  KB978695Uninst.log
  KB975558Uninst.log
  KB2378111Uninst.log
  KB959772Uninst.log
  KB929399Uninst.log
  WMFDist11Uninst.log
  wmp11Uninst.log

  Now I get crashes every time like this (no blue screen! task stops and restarts...):
  Failing application explorer.exe, version 6.0.2900.5512, failed module unknown, version 0.0.0.0, address failure 0x4ec683bd.

  Dr.Watson LOG:

  *---> Dump State of Id of Thread 0xdec<>

  EAX = 00000001 ebx = 00000000 ecx = 04c0ff00 edx = 7c90e514 esi = 4edd72a4 edi = 7e42a340
  EIP = 4ec683bd esp = 04c0ff84 ebp = 04c0ffb4 iopl = 0 nv up ei pl zr po nc
  CS = 001 b ss = 0023 ds = 0023're = 0023 fs = 003 b gs = 0000 efl = 00000246

  function:
  No possible prior disassembly
  4ec683bd? ???
  4ec683bf? ???
  4ec683c1? ???
  4ec683c3? ???
  4ec683c5? ???
  4ec683c7? ???
  4ec683c9? ???
  4ec683cb? ???
  4ec683cd? ???
  BREAKDOWN-> 4ec683bd? ???
  Error 0 x 00000001
  4ec683bf? ???
  4ec683c1? ???
  4ec683c3? ???
  4ec683c5? ???
  4ec683c7? ???
  4ec683c9? ???
  4ec683cb? ???
  4ec683cd? ???
  4ec683cf? ???
  4ec683d1? ???

  *---> Back stack memory stack<>
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  ChildEBP RetAddr Args to child
  00000011 00000000 804f8cd9 0x4ec683bd 7c80a174 04c0ff80
  04c0ffb4 7c80b729 7c80a174 00000000 00000011 kernel32! WideCharToMultiByte
  04c0ffec 4ec68361 00000000 00000000 00000000 kernel32! GetModuleFileNameA + 0x1ba

  .. .any help or advice?

  THX!

  Due to the new BSOD in the last time, I did a RAM check... result: 1 RAM module corrupted, replaced it by a new... no more errors!

• Computer update crashed - error "Missing Operating System".

  Sometimes last night, my computer up to date and crashed.

  When I tried to start safe mode after running for a while, I finally got the missing operating system error message.

  Thoughts? Resolution?

  Oh, Vista o/s

  kindly call 1-800-936-5700 and assistance to resettlement or your operating system setting - ask the service customer you transfer to the Department of Vista

• Error in build Simulator target

  I'm new to BB 10 Web work 2, while trying to debug via Simulator, I get the following log?

  [INFO] The application of filling source
  [INFO] The analysis of config.xml
  [INFO] Generation of output files
  [WARNING] Cannot find the debugging token. If you have an existing token of debugging, copy it to C:\Users\Student\.cordova\blackberry10debugtoken.bar. To generate a new token of debugging, choose 'run '.
  [INFO] WARNING: Cannot find default icon or application
  [INFO] Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\simulator\bb10app.bar
  [WARNING] Cannot find the debugging token. If you have an existing token of debugging, copy it to C:\Users\Student\.cordova\blackberry10debugtoken.bar. To generate a new token of debugging, choose 'run '.
  [INFO] WARNING: Cannot find default icon or application
  [INFO] Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\device\bb10app.bar
  [INFO] BAR complete packaging

  Is there a Setup error in SDK?

  MShom, I was able to get a debugging managed without warning by bb10app.bar copy of C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\simulator in C:\Users\Student\.cordova file and rename it to blackberry10debugtoken.bar.

  Can I know why the bar file generated in the form bb10app.bar and BB10 WW2 application blackberry10debugtoken.bar?

  [INFO]    Populating application source
  [INFO]    Parsing config.xml
  [INFO]    Generating output files
  [INFO]    Warning: Cannot find application or default icon
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\simulator\bb10app.bar
  [INFO]    Warning: Cannot find application or default icon
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\MyTime\platforms\blackberry10\build\device\bb10app.bar
  [INFO]    BAR packaging complete
  

• Error starting the Simulator

  Hello

  When I run the Simulator, on the screen, it is showing the following error

  "[SOUTH error: cannot verify the package id is not valid, Missing].

  Help, please.

  This seems to be the same problem as this thread:

  http://supportforums.BlackBerry.com/T5/native-development/BlackBerry-10-Simulator-not-showing-up-in-...

• Fix API error in the Simulator

  Hello

  I get error Secure API in my Simulator OS 6.0 torch.

  How can I remove it from my Simulator?

  I have my keys secure but who are on another machine and I can't access it from this machine.

  My other app works fine on 9000 OS 5.0 without code signing Simulator.

  Thank you

  Afonso Tyagi

  Check that the safety of the appliance is turned off.

  Configurations of debugging-> General-> peripheral Security Enable in Eclipse.

• Error 545 JVM Simulator 9630

  Hello

  IAM trying to run my application using JDE 4.7 and 9630 simulator (BB-Tower Simulator), it gives me JVM error 545 incompatible file system...

  After looking on Google for a while, I discovered a solution of running clean.bat... .but I have not found any clean.bat Simulator installed directory, so I copied it from the repertoire of Simulator JDE 4.7... even if the error persists...

  Kindly help me as soon as possible... she needs I need to remove & reinstall this Simulator or I should run my application using JDE 5.0...

  Any kind of help would be appreciated...

  Try to delete the files from the directory of Simulator *.dmp.

  If this does not work, delete all your cod and related files in the directory also (and *.dmp file) and try to raise the Simulator without your applications.  Assuming this works, add back in your applications.

• General Socket error on torch Simulator

  Argh...

  I used the storm Simulator to test my application.  I can read and write very well http and Sockets. Now I download the Simulator for the torch and I get "General Socket error" on all network access.  I looked in the debugging that I can't find something different.

  Ideas?

  Mark,

  Sorry I just thought of it.  He had something to do with my VPN DNS resolution.  I just used the IP address and I'm good.

  Thank you.

• How to display the javascript error in the Simulator?

  Hi, I have experience several problem in developing countries using webwork.

  I use Blackberry webwork in plugin eclipse to develop the program, my Simulator is 9800 6.0.0.337.

  I have the problem when I try to load his PIN and file reading / writing.

  var pin = blackberry.identity.PIN;

  The example of read/write file I copied directly from the code sample download in Blackberry.com.

  Two of them does not work. I want to use try {} catch (err) {} to warn of the error, but this return "undefined" for me.

  Is this something that I forget to install?

  Sorry cannot any more help because I think that most of these functions does not work on the playbook Simulator

  (in your case test you on smartphone where I would expect most APIs to work..)

  Last try if...

  Check the following line in your code example:

  var blob = blackberry.utils.stringToBlob(filecache);
  

  who do not:

  var blob = blackberry.utils.stringToBlob(textarea);
  

  ?

  Kind regards

  H.

  PS: regarding the playbook Simulator the following are suspect - i.e., don't think they work:

  blackberry.utils.stringToBlob (somestring)
  blackberry.utils.documentToBlob (somedoc)

  blackberry.identity.getDefaultService)
  blackberry.identity.PIN
  blackberry.identity.IMSI
  blackberry.identity.IMEI

  Among others...

• Cannot install the conflict file travel.dll error in Flight Simulator

  I installed FS 2004 on my laptop (8.1 64-bit Windows). When I try to run it that a message appears saying it cannot load to a conflict with the travel.dll file. I found the file, but I have been unable to remove it. I tried to change ownership, but I wasn't able to recover the privileges of deletion. Is there a way to get around this conflict of file during the game, loading process?

  Hello

  What is the accurate and complete error you get when you try to delete the file travel.dll?

  If you get access denied when you try to delete the file.

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670/en-us

  Alternatively, you can try to install the Flight Simulator in clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Post us the results after trying the steps above.

• After a computer crash error of 5.7 Lightroom displayed when starting "Lightroom has encountered an error when reading of he is seen hiding and need to stop smoking.

  "Lightroom has encountered an error during playback of he is seen hiding and must leave" appears when trying to open LR 5.7 after laptop crashed.

  Hi Adobemun,

  Seems that your preview cache is corrupt.

  You must go to the location where your catalog is stored and get rid of Previews.lrdata (not .lrcat file) then, launch Lightroom and it would recreate the previews itself.

  Kind regards

  Claes

• Audition CC startup crash/error

  Adobe Audition crashes when it starts every time that happened?

  Here is the crash log:

  Level	Date and time	Source	Event ID	Task category
  Error	15/07/2014-18:06:18	Application error	1000	(100)	"Name of the application vulnerabilities: Adobe Audition CC.exe, version: 7.0.0.118, time stamp: 0x537b7f08.

  The failed module name: AuUI.dll, version: 7.0.0.118, time stamp: 0x537b7ee7

  Exception code: 0xc0000005

  Offset: 0x000000000001629e

  ID of the process failed: 0x21c0

  Start time of application vulnerabilities: 0x01cfa014692ab251

  The failing application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe hearing CC.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Audition CC 2014\AuUI.dll

  Report ID: a954ec0d-0c07-11e4-827a-448a5b457514

  Faulting full name of the package:

  "On a package of faults application ID:"

  It seems to have something to do with AuUI.dll

  DXDIAG

  ------------------

  Information System

  ------------------

  Time of this report: 07 15, 2014, 18:20:25

  Computer name: MSI

  Operating system: Windows 8.1 unilingual 64 bit (version 6.3, 9600) (9600.winblue_gdr.140330 - 1035)

  Language: English (regional setting: English)

  System manufacturer: Micro-Star International Co., Ltd.

  System model: GP60 2PE

  BIOS: E16GHIMS.109

  Processor: Intel Core i7-4710HQ CPU @ 2.50 GHz (8 CPUs), ~2.5GHz

  Memory: RAM 8192MB

  Available OS memory: 8110MB RAM

  Page file: 5124MB used, 5928 MB of available space

  Windows Dir: C:\Windows

  DirectX version: DirectX 11

  DX setup parameters: not found

  User DPI setting: 120 DPI (125%)

  System DPI setting: 120 DPI (125%)

  DWM DPI Scaling: disabled

  DxDiag Version: 6.03.9600.16384 64 bit Unicode

  ---------------

  Display devices

  ---------------

  Card name: Intel(r) HD Graphics 4600

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics Family

  DAC type: internal

  Device type: complete unit

  The device key: Enum\PCI\VEN_8086 & DEV_0416 & SUBSYS_11131462 & REV_06

  Display memory: 1792 MB

  Dedicated memory: 0 MB

  Shared memory: 1792 MB

  Current mode: 1920 x 1080 (32 bit) (60 Hz)

  Name of the monitor: generic PnP monitor

  Monitor model: unknown

  Monitor ID: LGD0259

  Native mode: 1920 x 1080 (p) (59,934 Hz)

  Output type: internal

  Driver name: igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igdumdim32, igd10iumd32, igd10iumd32

  The driver file version: 10.18.0010.3621 (English)

  Driver version: 10.18.10.3621

  DDI Version: 11.1

  Levels: 11.1,11.0,10.1,10.0,9.3,9.2,9.1

  Model driver: Driver WDDM 1.3

  Pre-emption of graphics: DMA

  Calculate the pre-emption: wire

  Miracast: supported

  Hybrid graphics GPU: integrated

  P - Power States: not supported

  Driver attributes: Final retail

  Format/driver Date: 21/05/2014 00:33:40, 16586584 bytes

  Would be WHQL logo: Yes

  Date stamp WHQL:

  The instrument identifier: {D7B78E66-4756-11CF-F779-1931BBC2C735}

  Vendor ID: 0 x 8086

  Device ID: 0 x 0416

  SubSys ID: 0 x 11131462

  Revision ID: 0 x 0006

  Strong driver name: oem29.inf:5f63e534dd929195:iHSWM_w81:10.18.10.3621:pci\ven_8086 & dev_0416

  The driver rating: 00DA2001

  Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_C ModeVC1_C

  DXVA2 Modes: DXVA2_ModeMPEG2_VLD DXVA2_ModeMPEG2_IDCT DXVA2_ModeWMV9_IDCT DXVA2_ModeVC1_IDCT DXVA2_ModeH264_VLD_NoFGT

  Card name: NVIDIA GeForce 840 M

  Manufacturer: NVIDIA

  Track type: GeForce 840M

  DAC type: Integrated RAMDAC

  Type of device: device of rendering only

  The device key: Enum\PCI\VEN_10DE & DEV_1341 & SUBSYS_11131462 & REV_A2

  Memory display: 4020 MB

  Dedicated memory: 1972 MB

  Shared memory: 2048 MB

  Current mode: n/a

  Driver name: nvd3dumx, nvwgf2umx, nvwgf2umx, nvd3dum, nvwgf2um, nvwgf2um

  The driver file version: 9.18.0013.3788 (English)

  Driver version: 9.18.13.3788

  DDI version: 11

  Levels: 11.0,10.1,10.0,9.3,9.2,9.1

  Model driver: Driver WDDM 1.3

  Pre-emption of graphics: DMA

  Calculate the pre-emption: DMA

  Miracast: Not supported by the graphics driver

  Hybrid graphics GPU: discreet

  P - Power States: not supported

  Driver attributes: Final retail

  Driver Date/size: 20/05/2014-10:44:03, 17480432 bytes

  Would be WHQL logo: Yes

  Date stamp WHQL:

  Identifier of the instrument: n/a

  Vendor ID: 0x10DE

  Device ID: 0 x 1341

  SubSys ID: 0 x 11131462

  Revision ID: 0x00A2

  Strong driver name: oem28.inf:0f066de3569b1e91:Section151:9.18.13.3788:pci\ven_10de & dev_1341 & subsys_11131462

  The driver rating: 00DA0001

  Video Accel: n/a

  DXVA2 Modes:

  Deinterlace caps: n/a

  D3d9 Overlay: n/a

  DXVA-HD: n/a

  DDraw status: enabled

  D3D status: enabled

  AGP status: enabled

  Worked OK before? Nothing changed on your PC, Windows updates etc.. ?

  It could be that one of the Audition configuration files is corrupted. Try renaming the file of configuration of hearing something like "6.0.bak", which would cause the hearing re-create the folder settings by default when you reopen the software. If it works, you can try various settings .xml files back to your folder renamed if you have custom settings, it copies. the folder is located at:

  C:\Users\"username"\AppData\Roaming\Adobe\Audition\6.0 where "username" is your username.

  If not, reinstall hearing could solve the problem.

• Everyone is App Crash error message \screen\previewsequence.cpp-2705

  Has anyone seen the error crash app at the following address:

  \screen\previewsequence.cpp-2705

  Prepro CC on a PC running.

  CPU i7 - 3770 k @3. 5 GHz

  16 GB OF RAM

  Everything I do replace video clips in the sequence of mounting with clips of same due to clips showing offline project in order, but not in the project area. I tried to recreate a link to clips, but always the same hash grey/blue lines in the sequence.  Recently upgraded to CS6 CC to find myself in this situation.

  Recently reinstalled the operating system Windows 7 on a new SSD which is also where I install CC.

  Any suggestions?

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 7.2.1.4

  Application timestamp: 52aed7f3

  Fault Module name: MSVCR100.dll

  Fault Module Version: 10.0.30319.1

  Timestamp of Module error: 4ba220dc

  Exception code: 40000015

  Exception Offset: 00000000000760d 9

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: ee40

  More information 2: ee403d778c281f3204107b7044f1d857

  Additional information 3: a376

  Additional information 4: a376ec51477d0383c4b28bbec978739e

  Yes, it's a Canon XF100.

  Update on the results of these problems previously listed, is that I had to go back to CS6, export the project in a new location using the parameters of the project.  Once I did, then I imported this project file into a new CC prepro project.

  What I noticed was none of the subelements that I always had in the CS6 project folder and had not yet put in a sequence was a transfer.   So I went back in CS6, added the sub-elements to the sequence and then only imported these delays.