Crash of MacBook, iMac with SATA-USB cable files

Hello.

My Macbook (2006) took a nose dive after a very solid 10 years of use. He has been blocked on the gray screen with the Apple logo and the spinning equipment. Forever. Would not boot mode safe mode or Recovery Mode. I accepted this.

I'm currently trying join my school for the HARD of MB my iMac disk files. I removed the drive HARD internal of the MB. I have a SATA cable / USB. I plugged the cable on my iMac and initially nothing was recognized even if I could hear the disk rotation. After about 2-3 minutes I got a message telling me the disc HARD cannot be repaired, but I could always transfer files. Great! That's all I wanted to do. Well, the HARD drive appeared in the Finder and I tried to navigate to find important files I got a message telling me that the HARD drive has been expelled irregularly. So I disconnect it, plug it in. Another few minutes and I get the same message (cannot be repaired), but this time I have no HARD drive in the Finder. I tried to run first aid at the disk in disk utility, without success. Now I can't even pop-up in the Finder or disk utility when I plug. I can hear it running, but nothing happens, and then I get a message "disc not eject properly.

My question is this: How can I get information from this my iMac HARD drive? Is there anything else I need to do? All I want to do is pull my notes of the current semester. Nothing else on this HARD drive as it was basically just a web browser/treatment for the past year.

FWIW: I think I was running Lion as an operating system on the laptop that I couldn't progresses from here with updates. I'm under El Capitan on my iMac.

Even if you already shot the player, have you considered using Disk Mode target instead?

Target disk mode, indeed, turns your Mac into a 'external drive '. In this mode, you can connect your defective Mac to Mac via FireWire or Thunderbolt and see the contents of the disc of the CMA on your Mac, as if the drive was an external drive. This not only allows you to easily access the data on the hard drive of the Mac, it also allows you to use the material of a Mac to boot another Mac operating system and data.

To access the target disk Mode, reboot your Mac and hold down the T key as soon as you hear the startup chime. Keep now until you see a FireWire logo or white Thunderbolt appear on the screen (depending on the hardware capabilities of your Mac). Now, you can directly connect your Mac to Mac defective with the appropriate cable and access the drive of this Mac. When you are done, unmount the drive of the defective Mac from your Mac running OS X, then press on and hold the power button / stop the Mac defective until the system turns off.

Tags: Notebooks

Similar Questions

  • OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

    I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

    The Mac has no network to the internet via a port USB, WHY NOT?

    Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

  • Lightroom CC 2015.2.1 D800 import slow with attached USB cable

    Hello

    When I join the MacBook Pro retina the D800 with a cable USB 3 (various) (end of 2012), not all images are displayed in the import dialog, and if all images are marked for import and import is started, nothing happens. When I do not start the import of images and wait a few minutes and reopen the import dialog, all the images are displayed correctly. When you import then all images, also nothing happens and the images are imported after waiting a few minutes. The time-out period is about 5-10 minutes until Lightroom starts to import images from the camera on the disk.

    Import of images of D800 with a USB cable for Mac OS "Fotos" app works normal and without problems (or wait time). Now, my solution is to import images into Mac OS app "Fotos" and then import these files to image imported into Lightroom.

    I hope that the new import dialog will change the old, that was quick, easy and reliable!

    Thanks for help and best regards,

    Matthias

    The latest updates of Lightroom (dating back to the former import dialogue) solved the problem. When attaching the camera to the port USB to import is as fast as it was before. I tested several times, and none of the problems described above appear (images appear instantly in the import dialog and import is then very fast).

    I also always use the SD slot, but sometimes I only have pictures on CF card, so the SD card does not help then. To this end, the problem was really annoying!

  • How do I get sound through my iMac with a USB turntable?

    How do I get sound through my iMac with a USB turntable?

    You need something like this:

    https://griffintechnology.com/us/iMic

  • How can I get my new acer chromebook 15 to download photos from the smartphone with the usb cable.

    I tried to connect my smartphone to Chromebook with a usb cable to download pictures without success.  It doesn't do anything.

    Thank you

    Here is a link that may help you: https://productforums.google.com/forum/#! topic/chromebook-central/Vcw06VtlkhI

  • OfficeJet 6500 connects to the computer with a usb cable.

    He has connected with a usb cable attached with no problems at all, but it has just stopped working suddenly. There is no error message, it does not simply read the printer any port it is connected to. The printer itself seems to work fine - I can make copies with her, and there is no problem I know with the computer. I tried to install wireless, but there need to be connected all first and I tried to buy a new usb cable, but it did make a difference. I'm on a PC - a Compaq laptop. Any suggestions would be greatly appreciated.

    A few ideas:

    1. do not go through a USB hub, plug directly into a port on your PC.

    2. make sure that the USB cable is plugged into the appropriate to the back of the printer port (it will come indeed in the Ethernet port, but obviously will not work here).

    3 restart the printer and the PC.

  • Learn how to connect to internet from pc to mobile phone with a usb cable

    I want to know how to connect to internet from pc to mobile phone with a USB cable

    'S called it tethering.

    1. Search for this term in the manual of your phone.
    2. Search for this term in the contract of your phone network operator because not all telephone network operators allow tethering.

  • BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

    Hello

    I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

    I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

    Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

    Thank you very much!

    Hello

    It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
    If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

    I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

  • Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

    Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

    Hello

    The fastest internet connection depends on your internet speed provided by her Internet (ISP) Service provider. Therefore, contact them to receive a best speed of the internet.

    For more information:

    How to increase the speed of navigation: 7 ways to work faster on slow connections

    http://www.Microsoft.com/atwork/remotely/connections.aspx#fBid=TN-_TCHYDMB

    10 tips to help improve your wireless network

    http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=1vrPRuhAhAg

    Internet Explorer is slow? 5 things to try

    http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

    It will be useful.

  • can I use my wireless printer if it is connected to the main computer with the USB cable?

    My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.

    My question: can I use the printer to the host computer by USB and computer laptop through wireless?  If yes how to configure connections? Thank you.

    Hello

    A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.

    Kind regards

  • How can I connect my camera to the pc with my USB cable

    312

    Connect the cable to a USB port on a PC with the iPhone connected to the other end of the USB cable.

  • Watching movies with subtitles of Sony Xperia M4 to LG TV with a USB cable?

    Hello

    I own a Sony Xperia M4 black Aqua (with android 5.0). With this smarth phone, I want to stream movies from my phone (sd card, so locally on my phones hardware) to my TV. Now, if I put a USB cable and start the standard "VCR", it has an icon of TV what pushes me will flow indeed from my phone to the TV via the USB cable. However, I can't get the subtitles to display on the TV (or .srt file separate or multiplexed into a single file with MKVToolNix .mkv), so I guess that that is not supported.

    I went and looked for software videoplayer that supports subtitles. I downloaded MX player, because the comments especially said it was one of the best, and indeed, this one shows files same .srt separate on my device, however it has no option or icon from anywhere to listen to my TV... (google search gives me only shit on chromecasts and so on)

    My question is... I have a PHONE, a USB CABLE... and 1 TV (which is a LG 32LV375S), how can I do this combo work?

    (and please don't give me answers like buy chromecast, miracast or a HDMI crap or whatnot, I'm not going to buy, I need a fix for combination tv/usb/phone and I would like an answer that points me to software as the standard videoplayer (with a tv/option icon) which may indeed spread as I want too but actually takes in charge the subtitles). Google does not help me, that's why I asked this question here for a human being answer instead

    Thanks for your time,
    /Lews

    Telamon, the LG 32LV375S playback support, which is a little different from streaming, using DLNA. By reading the specifications for your TV, the LG 32LV375S does support DLNA and Windows 7 certified, and if it is true that Windows 7 was loved and praised by almost everyone, it is also true that the Windows 7 DLNA apparently doesn't support subtitles.

    While DLNA can be customized and compiled by different OEMs, if your certified status of W7 TV, no matter how much you try, I'm sure that TV will not be able to display the subtitles.

    I know that you wanted to spare us the 'buy a chromecast', but in fact, it's probably your only way to reach your goal. You can try VLC but I don't know if it will work or not.

    See you soon

  • Install Windows 7 (x 64) on external SATA SSD with SATA - USB

    I was trying to install Windows 7 x 64 Professional on an SSD to the computer with a SATA - USB connector. I started the Setup, but it wouldn't let me install because it was connected with a USB key. Is there another way to install it on an external SSD?

    Unfortunately, no, Windows 7 must be installed on a device of storage internally. If you have the eSATA port, you can install it on a disk external eSATA.

  • Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

    I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

    If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

    Lightroom Journal | Tips and advice straight from the Lightroom team.

  • iTunes does not list my ipod touch when I connect with the USB cable

    I bought an I - pod and put in place, but when you plug the USB cable, I-Tunes does not show the unit. Just down loaded music in my computer for the I - Pod so that it is on that point.

    Hello

    You use the Apple software (iTunes) and Apple (iPod) hardware.

    You must contact the Apple Support.

    "IPod Troubleshooting Wizard.

    http://www.Apple.com/support/iPod/five_rs/

    Or the iPod of Apple communities.

    https://discussions.Apple.com/community/iPod/Ipod_touch?CategoryID=221

    Or ask iTunes Support.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

Maybe you are looking for

  • BONES of Firefox does support Bluetooth 4.1?

    Features of Firefox OS currently for sale come with Bluetooth 2.1 or 3.0, but I was wondering if Firefox OS supports version 4.1? BONES of Firefox will project on a new Protocol of Bluetooth support in the future? Smart Bluetooth low energy, WHEAT

  • HP pavilion boot interrupt

    I have a pavilion of hp with installed prosavage s3graphbics card.  When I boot, the boot of embedded graphics, not the s3.  What F key I push to interrupt the boot sequence so I can change the integrated graphics s3 graphics? the F8 button takes me

  • Missing WiFi drivers for hp 15r062tu for windows 7

    Hello I have win 7 installed in my new computer hp 15r062tu laptop, but I could not find the drivers for wlan and bluetooth on your site. As a result, I'm ot able to use it. Help, please.

  • Increase control of the façade of a trigger button in the Loop Simulation

    I want the 'Index' control to automatically increment when you press the OK button. It works very well. However, the control of the Index gets automatically incremented whenever the VI is started and when you press the Stop button. Even if the box St

  • Help function Win32 API GetPrinter

    I use the WInspool.drv to determine the status of the printer. Using this DLL, I try to run the GetPrinter function. When I run the function, it returns an error. Can someone tell me what I am doing wrong? My separate functions to get the default pri