Crazy mouse on my Tecra 780 DVD

I know that this issue has been raised before but I just hit a wall of bricks above him. I had to reformat and reinstall Win98 on a 780DVD. Everything seemed fine until I tried to use a ps2 mouse. The pointer goes crazy, is creating 'right click' on the screen and all sorts of questions.

The dongle of rubber in the middle of the kb is OK on its own. I've read about the use of tsetup to try to address this problem and this is my new problem - I don't have it.
Where can I get tsetup?

Hello

Well, this device is an old classic. It s about 8 years!
AFAIK the tsetup updates the BIOS. If you liked the BIOS update?
I think first of all, you should check the mouse options.

However you will find newer BIOSES:
http://www.toshiba-tro.de/subpage/BIOS.html

Good bye

Tags: Toshiba

Similar Questions

  • Tecra 780 DVD - backlight on screen work

    On my old T 780 DVD that the backlight on the screen does not work, the dealer said I have to buy a new screen that will be expensive.

    My kids use only 780 T for games and I don't want to pay a price for new TFT and the external monitor takes too much space of bridges.

    Can anyone help, how to fix the new backlight in TFT?

    Thank you

    Hello

    It seems that your FL inverter is damaged! Reach
    https://EU.computers.Toshiba-Europe.com - download and Support - find an authorized Service partner.

    A Service partner could tell if the entire screen needs to be changed or just the FL inverter or something!

    Goodbye Chris

  • Tecra A8 DVD don't read/write DVD-R 1-16 x.

    Using Sonic Record DLA, Tecra A8 DVD don't read/write DVD-R 1-16 x. Ok work on DVD - R 1-8 x and CD DVD - R 1-16 x has tested successfully on the two recent Toshiba Satellite Pro and HP Office. Have updated the Bios, software DVD-RAM and Sonic DLA.

    Hey,.

    What exactly do you mean? This means that you can t burn DVD-r with 16 x speed?
    In this case, you should check the specifications of your CD/DVD drive. Not all models support this speed of combustion. In addition, I recommend using 8 x only, he speed will give you a better quality of the burned data/average.

    You must also use different types of media. I believe that your other computers have different drives in order to test different mediums. I have a good experience with Verbatim DVD-R.

  • Replacement of Tecra M9 DVD MultiRecorder Panasonic UJ-852

    Hello

    Unfortunatelly in my Tecra M9 DVD multirecorder is broken.
    It no longer works. System to 'see' it, but no reading CD or DVD, or writing is possible.

    I was looking for the recorder ultraslim PANASONIC UJ-852, but it is very difficult to find.

    So I bought the Panasonic UJ - 832 - almost the same driver (different write speeds).
    But BIOS informed me: ERROR INCORRECT of the BAY and the OS doesn't see at all.

    I also put the LG GSA-U10N multirecorder ultraslim wife U-300 toshiba unit but BIOS again informed me: ERROR INCORRECT of the BAY.

    What it means?
    Are there opportunities that I can replace my DVD broke to the other by myself?
    What I have to buy only UJ-852? Can someone help me?

    Thank you!

    Hello

    Maybe you bought a CD/DVD drive that is not compatible, and BIOS can not recognize this because of bad master/slave/c-salt settings.

    The settings for the desktop PC readers is editable using the jumper.
    The computer s portable slim CD/DVD discs online are controlled by the firmware and you cannot change these settings if you don t have the right firmware.

    So I think that you have to buy another compatible
    I recommend to ask the ASP in your country for a compatible ODD

  • Boot disk for Tecra 780 recovery DVD

    Please can you help me? I have a Tecra 780DVD. I need a product recovery boot disk (Win 95) as mine is corrupted. Disc Ref T #RB - EN - 20W95.

    Hello Rodger

    If you want to have a new product recovery disc, it can be ordered by the Toshiba service partner authorized in your country. Please contact them and see if they are able to order one for you. It's a good old classic and it is also possible that the CD cannot be stopped anymore.

    Good bye

  • Tecra A8 - DVD does not properly

    Hello

    My Tecra A8 has started giving me problems when I want to read a DVD/CD.

    If I launch the system with a disk in the drive, then explore correctly reads and shows the details of the data on the disc, though it may be music, games, DVD, movies etc. but when I go from drives, the new drive is not read disc that already contains data. It opens a popup and start the procedure for the preparation of a new blank disc. It shows all information data to a disc, if the disc is inserted, after the OS has started up?
    I thought that maybe it's a driver that does not work properly?

    Help, please

    Thank you

    What is happening or what appears on the disc if access you the data on the CD by workstation-> CD/DVD drive?

    This problem occurs with all CD or only single data CD?

  • Tecra M5 - DVD - Ram is not recognized

    Hello

    This is my 1st post, so this is.
    I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

    When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
    When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

    Some1 can help me please?

    Model name: SN-S082H/baby
    Code OEM: TS
    F/W ver. SB01

    Follow the instructions posted by Akuma. Maybe this can solve the problem.

    Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
    If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

    TEAC CD-224EN
    TEAC DV-28EN
    CCP UJDA770
    TSST TS-L462C
    Pioneer DVR - K16
    CCP UJ-841

  • Tecra M5: DVD player does not read these mini DVD

    I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

    Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

    All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

    Any suggestions?
    Why his messedup?

    Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
    Try the sascha. Maybe you are a lucky man, and it works.
    If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
    Then stops again, put the drive in the notebook and the startup of the device.
    The laptop should recognize the drive and must indicate the firmware again.

    I don't know if this will help but it s attemptable m

  • Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

    Hi all

    I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

    I installed the latest BIOS v2.50 as well as the latest Windows patches.

    To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

    I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

    Mounting frame is also OK (tested with the original Toshiba DVD ROM)

    Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
    What is generally a problem

    Thanks for reading my ad and you answers or advice

    Klaus

    Hello

    It won't be very easy get your new work of drive on your S1, I will explain why:

    Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
    their place according to the requirements of the laptop.
    Three settings are available: master/slave/CableSelect

    Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
    a disc factory settings in bulk comes as a disk Primary Master or CS.

    There are two options how to get to missing jumpers to make it work.
    (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
    (2) by a bridge of material on some pins to the back of the drive.

    As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

    As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
    According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

    start of quote:
    Dear Sir.

    The drive is detected beeing as a master drive.
    This setting cannot be changed. Are there no rider to do so.
    How mount you the device to your laptop, it's up to you.
    It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

    Kind regards
    end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

    As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

    Concerning

    chain

  • Touch pad/mouse sticker problem, Tecra s1

    Hello!

    I can't get the touchpad mouse or mouse sticker to function on my tecra s1. I installed the touchpad driver and double score.

    I use an external mouse (ps2 or usb), logitec.
    (I installed toshiba drives after installing drivers logitec.)

    When I click FN + F9 noting happen.
    What is the problem, I need help!
    This is a special order, I have install the drivers?

    Someone who now?

    Hello

    I use Tecra M1 to my work and it's almost the same machine. I use the external keyboard and mouse. In my case, there is no problem and I can use both internal and external devices at the same time. I don't really understand what is happening in your case.

    I just installed driver and a little mouse wireless application given by producer of external devices. I don't know, but the UtilityV1.0.0.2 to toggle DualPoint is responsible for the function FN + F9.

  • Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

    I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

    Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

    Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
    DVD player is Mat * a DVD - RAM UJ - 841 s

    Any suggestions?

    Hello

    On the Toshiba driver page, you can find the DLA for Tecra m7.
    Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

    Maybe it'll market

    But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
    This is why an additional driver should not be necessary!

    An additional proposal;
    Remove the drive from the Device Manager CD/DVD and restart the laptop.
    After restarting again the OS should reinstall the drive and renew the software.

    Another tip:
    -Launch the registry
    -Choose the registry key;
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
    -Reboot the laptop

  • Tecra M2 - DVD/CD drive does not read

    I have a Tecra M2 with the DVD Rom/CD burner.

    When a disc is inserted, it runs but does not read - light stays on. After a few eject and reinsert the cycles he usually manages to play the disc. Long the standing problem which affects different DVD and CD discs. Have used a disc cleaner to clean lens.

    Does anyone know if this is likely a faulty hardware or a driver problem?

    Thank you

    Search on the Toshiba site.
    For the Tecra M2 is updated firmware for some ODD available s. To check if you have such a unit.

    In addition, I would like to make a BIOS update. This you can also find on the Web from Toshiba site
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Tecra S2: DVD burn problem

    Hi all,
    We are 4 and we have about the same problem when you try to write a DVD with ours, laptops, with nero6 the error message is usually "there was a problem powe offers" or "invalid destination path" (I try to translate it from Italian error code). In any case, on all our laptop Tecra S2, it is quite impossible to write one DVD correctly. DVD TEAC DV-W28E material, the driver being used is by Microsoft

    Thank you all

    Hello

    First of all, it would be very interesting to know if you are using the Toshiba recovery image.
    Second, have you used different DVD and have you checked if this error message appears with other burning programs?

    I checked the page of the Toshiba driver and found an update of firmware for Tecra S2.
    In addition, there is also a DVD ram driver.
    I suggest you to install these applications.

  • In Tecra A8 DVD drive replacement

    My DVD player is down, I already have a replacement drive.

    Does anyone have an idea where the output of the DVD player is located so I can get out? I unscrewed a few screws, but it won't come out.

    Tecra A8 is the same as the Satellite Pro A120

    To swap the DVD drive, you must remove the keyboard.
    It's a little tricky and in my opinion if you n t have much experience with this you should go to a local ASP and ask a technician for help.

    Here, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  • M6-n113dx ENVY: ENVY of m6-n113dx Notebook - CRAZY mouse

    Hello

    I have this laptop: HP ENVY m6 Notebook PC (model m6-113dx)

    Serial number: [personal information deleted]

    Problem:

    The mouse cursor is crazy.

    Even without plug the mouse usb, same wihen I do not touch screen or mouse pad, cursormoves autour, makes clicks, then it closes windows, selects the texts and all the stuff 'he wants. "

    This happens in my two operating systems: Windows 10 and Linux Ubuntu LTS 14.04

    The two links above have videos I made to show the cursor crazy

    https://youtu.be/aJ3tVZPyT2U

    https://youtu.be/ERyizZ2Ay_g

    Hello @PedroMohn,

    Thanks for the reply!

    You can find drivers Touchpad for Windows 10 here:

    Drivers - HP ENVY m6-n113dx Notebook PC (ENERGY STAR)

    Select the tab for driver-keyboard, mouse and input devices.  You should see the Pilot of the TouchPad Synaptics, and you should be able to select Download 64-bit.

    You can use the following to help you find the drivers for your operating system of Linux Ubuntu: Computers HP - frequently asked Questions (FAQ) on Linux

    I hope this helps.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Kind regards!

Maybe you are looking for