Create a backup of the plant on removable storage

Similar Questions

• What is the difference between a backup of the plant and a recovery disk?

  For me a simple question, so I hope a simple answer.

  When I got to my laptop that I created a USB using DBR recovery. It is a little more than 8 GB in size and is appointed SYSRECOVERY.

  At that time there I didn't create a backup of the plant.

  Having recently been read on things related to the re-establishment of a system in case of disk failure hard etc, I saw that Dell has said you must create USB recovery media and a backup of the plant. So, I got a new USB and today created a backup of the plant.

  Looking at it, it is also called SYSRECOVERY and both have exactly the same list of files and folders and have almost the same size.

  So just what is the difference between these 2 options (if any)?

  Or do I now have 2 USBs that will do exactly the same work to restore my laptop computer provided that the factory?

  Case there is no difference, why Dell offer both (and recommend you create both)?

  Thank you

  Technically speaking a recovery media and backup of the plant are the same. But according to the post that you saw at Dell, recovery media is a backup of backup from the factory with the files and applications that you added later. Therefore, to be on the safe side, Dell recommends to create a backup of files and software that have been added later (or is not part of the default configuration).

  The factory backup contains all drivers and software according to the configuration of the PC, and that were pre-installed on your computer.

  Generally, Windows failure, you can use factory backup media to restore the PC without affecting your personal files and software. In the event of hard disk failure, where the hard drive is replaced, recovery media will be useful to restore Windows as well your files and applications.

• 10.2.3 FCPX create a backup of the library

  When you create a new library yesterday, FCPX has not created a backup of the library at the specified location. Other existing libraries are saved correctly. Even after the creation of duplicate projects and closing and reopening of the new library, not yet any backup library. Any suggestions? Thank you, marc

  What you've done by duplicating your project is the first thing that I would have suggested, (using the copy as command Snapshot is a manual way of backup and that some editors commonly use for version their projects.)

  But that is not answering the question of why your library is not automatically back up as it should. (I guess you already checked the location of the backups in the property inspector library > storage locations.)  First of all, remove preferences when you launch FCP. We e the new empty library as a library of important one test and edit to the project timeline.  Work on something else for 20 minutes, stop and check your backups folder.  If a backup was created, I suggest to move the event/project work to the new library. Open the working draft, do a trivial edit (after another 20 minutes) leave and see if things are back to normal.

  Good luck.

  Russ

• Remember to create a backup of the downloaded installation files?

  The instructions say:

  "AFTER INSTALLATION, FOLLOW THESE STEPS:

  1. take care to create a backup of the downloaded installation files, so you can install additional components or reinstall your

  software in the future. »

  What does that mean.

  What "file install?

  Where is it?

  You copy the files into a backup it - USB drive, external hard drive or whatecver, so you don't need to download them later. That's all it says. Basic rules of computer security.

  Mylenium

• How to restore the devices with removable storage "missing icons

  HelloW sir This is krivy! for some time more I'm months local disk G not displaying don't not its icon (devices with removable storage) totally absent I m so depressed about this because I m unable to put my pen-drive & usb Cables & having so much work to the system that has information in the key USB sir could you tell me a solution for this problem

  Hi krivy,.
   
  Method 1: Check if the drive is visible in disk management.
   
  a. right click on my computer > Manage > Disk Management > right click on the removable storage drive and select Change drive letter > select a new drive letter not already in use.
   
  See if that helps.
   

  Method 2: Run the troubleshooter from the link given below and if that helps.

  Hardware devices not detected or does not

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Record of creating file batch but the need to create a shortcut on the desktop and remove shortcut a day of age

  Hi dear I have not much experience in batch file writing but forums I dig a code and try to shape according to my requirments but after beating head couldn't get the correct result comes in front of you people help me please. file code of my baby
  off @echo
  MD C:\tempbackup\DAY_%DATE%
  MD C:\DAY_%DATE%
  Create shortcut f t C:\tempbackup\DAY_%DATE% - n "\Documents and Settings\eric\Start Menu\Proams"
  using this code, it create a folder and a file on the desktop as well, but is not a shortcut, it is just a file by name as the file Tempbackup.
  Basically, I want like this
  (1) I want to create the shortcut from the folder on the desktop of the file created in the folder Tempbackup
  (2) this file beats on execution will also remove old one day from the desktop shortcut
  so when I see this file to run. n IT run create the file in the specified folder, but no shortcut or create a shortcut without a path. When I click on the shortcut, it ask me how to open this file. so it's not a good shortcut or not a correct path.
  as I think that it good to mention here, that there is no other shortcut to other desktop I want to create so all DELETE option works perfectly.
  Please help me like you people can help...
  Eric
  ericcisco

  Hello

  Try these steps-
  Create the shortcut proposed (to cmd.exe/c start)
  Now, open properties such as proposed
  Add the full path in the 'Target' field with your own relative path and the app, for example
  %windir%\system32\CMD.exe /c start your_relpath\app.exe [your_args]

  That's all. However, doing so does not change the current working of the called program directory. If this is desired, then enter the following alternative:
  %windir%\system32\CMD.exe /c "cd your_relpath & start app.exe [your_args].

  The & is described as a command separator (see cmd /?). Note: Put something like '% CD%\your_relpath\' in the field ' start in ' doesn't do anything.

  You can try this as well-
  Create .bat file close record/yarn that you want to have the relative path
  Edit the file, and the file type: (as you want to open c:\bin\app.exe, and then place file beats in c:\run.bat)
  Departure bin\app.exe
  Save the run.bat file and double-click it to open it.

• move the backup of the plant to another drive

  I want to spend my 'factory image' folder to another drive in solid state.  How can I do?

  Thank you. I keep getting messages that runs the D: drive low disk space.  Since I have an SSD, I need to do something to extend the partition or get a second SSD and move the D: on the second disc.

  Thanks anyway.

• Creating a backup of the WIN7 OS only for new installation; is this possible? If yes tell me how please.

  Well, then I want to get a new drive hard but with a greater capacity. Mine is 320GB and I want to upgrade to 500 GB. I have two laptops and one I would like to back up the operating system for a new installation (for the other computer hp g56-130sa laptop) for the new drive HARD must be installed.
   
  Can it be done?

  Not for another laptop.  If they were the exact same books perhaps, but even in this case this is only a possibility.

  If you need to reinstall the operating system on your laptop, you have two choices.  The first and the best choice is to contact HP directly and try to get the recovery disc specific for this laptop.  The second choice is to buy a genuine Windows 7 installation disc.

  I suggest that you contact HP because it will be the best solution (and much cheaper).  If you are in the United States / Canada, give them a call at 1-800-474-6836 and talk to a representative for the recovery disc for this laptop.  If you are outside this area, you will need to go to www.hp.com/support to find contact information.

• Help! -New Dell i3847 - Windows 7 Pro - Dell Recovery Disk Win 8.1 & DBaR don't make a backup of the system

  I bought a new Dell i3847 and it has Windows 7 Pro 64 bit installed at the factory on it.

  I wanted to make a complete backup of the system, but the Dell Backup and Recovery software does not allow me to make a backup of the system.  In addition, I was unable to create a system recovery disk using Dell backup and restore.

  I can't use the drive system recovery expected Dell because it clearly states Windows 8.1

  (1) why is a Win 8.1 drive included with a Win 7 Pro 64 bit system?

  (2) what is the problem with Dell backup and recovery that she:

  (a) cannot create a recovery disc factory

  (b) allow me to create a backup system so I can go back to the factory State

  Help!

  It has been 2.5 hours and it is still "initialize disk" to create a recovery of the plant.  It usually somewhere fails during initialization or in writing.    Spend hours for each failed attempt to create a factory recovery disc is NOT GOOD!

  The factory restore disk was finally created.

  Dell is now a person pays create a backup system and the user must download a update to do so.

  Microsoft has a tool to create a system image and make a recovery / restore disc which is free.

  So, I used DBaR do restore disk by the factory.

  However, to make a system image and a recovery / restore for that, I used windows 7 built in software.

• Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

  I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

  I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

  How can I create a backup of the system?  Why I get this error?

  Thanks for all the info. My situation sounds very similar to yours.

  I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

  V1.7.1.2 downloaded and executed new facility.

  When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

  As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

  However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

  In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• How to make a backup of the folder for Captivate 7 Patch Layouts?

  Hello-

  I'm trying to follow the instructions for the Captivate 7 patch, but I don't know how to create a backup of the folder Layouts as the State of instructions to do so. In addition, they say to make backup "and delete it. They mean to delete the original file and keep the file backup that I create, correct?

  Important: before using Adobe Captivate 7.0.1 make sure you take a backup of the Layouts folder and delete.

  File layouts are present:

  • Location of Windows: C:\Users\Public\Documents\Adobe\eLearning \-assets\

  I was able to find this folder, I just need help in creating the backup... Sorry, I'm not the most computer person warned

  Thank you!

  You just copy in a different folder, or rename it as, say Layouts_old.

  Anthony

• Devices with removable storage (my computer)

  I have the Travan Seagate TR-4 tape drive is indicated as being activated, but it does not show the devices with removable storage window.  I think if she were here, he would drive F:. The software with the player is for windows 95, I think.

  "Chubby Checker" wrote in message News: * e-mail address is removed from the privacy * .com...

  I have the Travan Seagate TR-4 tape drive is indicated as being activated, but it does not show the devices with removable storage window.  I think if she were here, he would drive F:. The software with the player is for windows 95, I think.

  You must find the XP drivers for the drive and install them if the manufacturer of the drive has put at their disposal.  The backup program can run on Win XP, but if it is a Win 95 program you can't get to work.  You can try running in compatibility mode.

• Managing removable storage in windows 7

  I replaced my computer that was running Windows Xp Professional with the new one running Windows 7 Edition Home Premium. The only way I can access my documents is backup of windows xp (.bkf) but windows 7 will not read these files. I tried many suggestions from the microsoft site, but it all comes down to the fact that RMS is not able to be activated. I see that you said in November 2009 that it would be corrected when windows 7 has been generally use. I don't have a hard drive for use work transfer.

  Carl

  Hello carl38245522,

  Windows 7 no longer has the management of removable storage included in the operating system.

  Click the number of the KB article for assistance.
  KB Article ID: 974674 -restore Description of the backup of Windows NT to Windows 7 and Windows Server 2008 R2

  Please let us know if that helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think