Create a journal in the tab control tab and create tab is disabled and grayed out

Similar Questions

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Try to create a new VPN connection but Creat new network connection is grayed out

  Hello world

  Thank you for your help in advance.

  I would like to ask why I could not create a new VPN connection as the "Creat new network connection" is grayed out. I'm also sure that remote access connection manager, and another car once are started.

  I can create an account with my domain administrator account. But once I passed the orginary user, the shortcut to the connection could not be accessed. I also tried to add the user to the local Administrators group, and the result is the same.

  HOEP that you can help.

  Thank you.

  Windows XP Service Pack 3?

  Do you have any software security 3rd party running on this computer?  Or maybe something in group policy that limits access to create a new network connection?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• In clear, all the history in detail window Forum selection & search history is disabled and grayed out and I can't select the option.

  In clear, all the history in detail window Forum selection & search history is disabled and grayed out and I can't select the option.

  You are welcome

• I'm doing iPhoto my screen saver and I am not given the choice, when I click on "Source".  iPhoto is grayed out.  How can I make iPhoto my screen saver?

  I'm doing iPhoto my screen saver and I am not given the choice, when I click on "Source".  iPhoto is grayed out.  How can I make iPhoto my screen saver?  I'll just put up my new iMac.

  As a guess I think you need to import your iPhoto library in Photos and chose the photo library.

• Recently closed tabs/windows/sessions permanently grayed out, Firefox home page search does not more

  Running Firefox 26 and recently closed/windows tabs session restore menu items are grayed out and never activate, I can't even use the shortcut (ctrl + shift + t)

  Also, I noticed the search firefox homepage has now stopped working, by clicking find just does nothing and even little ads mozilla which would show under the search bar disappeared

  I thought it was a question the profile/malicious module so I did a reset, which didn't work, so I uninstalled, removed personal customizations in uninstalling and doing a new installation of firefox, always the same questions...

  Scanned my computer with an analysis of the deep system using bitdefender updated 2013, no virus

  I don't have install all my previous modules (adobe pdf creator was automatically it then reinstall started but disabled) and sessionstore in all values: config are default and correct

  Help, please!

  After you have uninstalled firefox, remove all traces of the registry and installed a disc, many scans for malware, spyware and anti-virus and scans even programs programs, registry cleaning, I found that there are no problems with my computer

  I then tried to install an older version of firefox (v20) hoping that would solve the problem, to my surprise, everything finally worked!
  so I've updated to v26 and nothing worked as above!
  Then I tried downgraded v25 and once again everything worked!

  Since I understand that the issue was NOT with my profile, extensions, plugins, settings or whatever it is my fault, there is a problem with firefox 26 and more!

  If someone has similar problems, I recommend that you install a previous version of firefox and see how it works, disable automatic updates if that helps the issue

• My downloads via Firefox did in fact download - "Open" and "Open containing folder" and grayed out when I right click on downloads in the downloads menu

  I had this problem for quite a while. Downloads Download not really. Nothing comes in my download folder (and I checked where they are supposed to be stored, I'm checking the right place). In my downloads through the client Firefox popup if I click on any download, 'Open' and 'Open containing folder' is greyed out. I tried using 18 Firefox and the current client every night and reinstalled several times.

  What security (firewall, antivirus) software do you have?

  So "open" and "Open containing folder" in the menu contextual in the window Download Manager are grayed out then it means that the file is no longer in the original download location and they have been removed by anti-virus software or cleaning.

  It is possible that anti-virus software is corrupt downloaded files or otherwise interferes with the download of files.
  
  Try disabling analysis in real time (live) files in your software anti-virus temporarily to see if that makes working download.

  See:

  • http://KB.mozillazine.org/Unable_to_save_or_download_files
  • browser.download.manager.scanWhenDone

• Satellite Z930 - mode boot Boot CSM and grayed out on the value

  Hello

  Hope someone can help me please.

  I have a Toshiba Ultra Z930 friends book.

  When you start the laptop does not start it comes up with the meesage PXE - E61: Media Test Failure.

  It is a Windows 8 portable 3rd Gen i7.

  I can boot from Hiren'S and the hard drive is located and can be selected and all files seem to be intact.

  I went into the BIOS and found that the startup mode is set to MSC Mode.
  However, Windows 8 requires the for UEFI boot mode.

  I can't find how to change the boot of the CSM Mode in the UEFI.
  The option is grayed out and cannot be selected.

  Help
  Please

  Hello

  Go to the BIOS by pressing F2.
  Then put the BIOS on the default settings, save the changes and power the laptop off.
  Then switch on the device and access to the BIOS, once more the key F2.

  According to my experience, secure boot option must be available, and you should be able to change the startup mode UEFI/CSM layout too.

• AutoCorrect and highlight the option enabled and grayed out in Windows 10

  Everytime I type something in my language, I get my words highlighted in red and it is really annoying. I went looking for options to turn it off, the only thing I found was this setting in the screenshot that is grayed out, activated, and I can not turn off but it is grayed out.

  There is a link that says "go to your PC settings" and it goes to a tutorial that shows how to turn off the AutoCorrect and spell checking. However, this is for Windows 8.1 and these measures do not result in Windows 10. I tried searching for him everywhere and he just does not exist in Windows 10.

  Someone knows how to turn off this annoying thing?

  

  You must display this feature in Windows 10.

  http://community.Skype.com/T5/Windows-desktop-client/how-do-I-disable-auto-correct-for-Skype-in-wind...

• How to restore the function of "empty trash" on XP - it is always grayed out?

  I can't always empty my trash - the command is always grayed out when I opened the icon?

  Check this thread - reply in this thread.

• Box "Always use the selected program to open this kind of file" is grayed out out__cant change file association for any type of file

  I'm not allowed to change any combination of files for any type of file... If I try to associate a file type with a program that I can't the box is grayed out to always open the file with this program, for example, if I try to open .py (programming in python language file) with python from another program whenever I have to right click and open with python, but if I want to choose the "always use". the selected program to open this type of file"is grayed on I can not change it... pls help

  Hi VikkHckrz,

  1. you remember to make changes to the computer recently?

  Method 1:

  You can consult the following KB article and run the fix it tool available and check if you can assign file association.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Also check out the link:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  After running the fixit so check the option is grayed out or not.

  Method 2:

  If you're still having problems, then you can try to change the settings in the registry only if it is present on your computer and check if it helps.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer

  (c) in the right side of the screen, double click on "NoFileAssociate".

  d. change the value of "NoFileAssociate" from 1 to 0.

  e. exit the registry editor and restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The creative cloud in my subscription 5 Lightroom icon is grayed out.

  Impossible to use the icon to access the cloud.  How can I fix?

  Please try these: -.

  • Re: CC-icon grayed out, can not download or update all programs
  • Icon creative cloud in grayed out in the menu bar.

  Concerning

  Stéphane

• I can't click the app button - language on cloud creative because it is grayed out.

  I am a subscriber to adobe CC and I installed all the applications in English except CC Indesign which is in Korean.

  So when I need to update Indesign, I should change the language of the creative cloud of EN of KOR.

  But, the button that is capable of changing the language has been grayed out. So, I can't choose it!

  I need your help!

  Thank you!

  Nadette, please try to disconnect from the creative cloud and reconnect. You can also try the following steps to update your product.

  1. launch InDesign CC2015.

  2. click on 'Help' > 'Updates '.

  I hope this helps.

• Using aliases for the indicators, controls, procedures and calculated channels

  Hello

  I noticed that aliases do not appear in the workspace for the controls and indicators and procedures system Explorer and see calculated. Is there a way for them to appear? I need to use aliases because I like my definition of the system to control several test systems (which have different CAN report names). Otherwise my system definition would break every time I go to another CAN the database. I thought that the inability to address limited to the configurable alias controls add on, but it seems that VeriStand natively cannot address the areas I would like to also well done right click. Any recommendations would be welcome.

  Thank you.

  You are right that you cannot use alias in a file system definition for mapping purposes. It is an area that we hope to improve in the future. The initial design of alias was to serve as a public interface for the workspace, profiles of stimulus and so on. However, it is certainly a use case valid to be used as an interface in a system definition.

  A possible solution would be to create a set of user channels that play the public role of your interface in your system definition. Always use your user channels in all procedures, calculated channels and so on. Map your CAN channels on these channels to the user. Whenever you update YOUR database, you must remap the new CAN channels to the appropriate user channel. You can also automate this activity by importing a file delimited by tabs on the mappings page. The one drawback here is that your target will take a little more time to deal with these mappings.

• I use Photoshop CC 2014, try using the "new 3d extrusion of select layer"; why it is grayed out/not available?

  I created a text box with the text. When I go to this option in the menu - this is what I get.

  

  Hi Susan,.

  Click the image menu and choose mode and change color from CMYK to RGB color.

  3D feature will work in CMYK mode.

  Thank you