Create a repair of emergency CD bootable for XP disc?

Is it possible to create a disc of CD bootable for XP emergency repair?

The question is vs CD disks

1. create a bootable CD from a pc can be used with the XP operating system?

and/or

2. create a bootable from a floppy CD? (emergency repair disk)?

As my perception (amateur) is that most recent PC do not have floppy drives, I'm confused about why the repairs on CD are not covered by Microsoft?

Here's how to make a CD of XP bootable and a Hiren BootCD Recovery Console (or require XP media).

I don't remember in recent memory any XP problem that I could not deal with one or the other.

Microsoft support engineers don't know how do cela or are banned - I think that there is not a Microsoft KB article on this subject. If you are a self and a post, you better include a Microsoft KB article in it than a place or it does not count.   I think that they do not know how...

You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

The ISO bootable image file you need to download is called:

xp_rec_con. ISO

Download the ISO from here:

Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

When you start on the CD, follow the instructions:

Press any key to boot from CD...

Installing Windows... going to pronounce.

Press 'R' to enter the Recovery Console.

Select the installation that you want to access (usually 1: C:\WINDOWS)

You may be asked to enter the password (usually empty).

You should be in the folder C:\WINDOWS.  It's the same as the

C:\Windows folder that you see in Solution Explorer.

The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

Do you have a Hiren BootCD you can download here:
http://www.hirensbootcd.org/download/

The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

If you need a simple and CD burning, this is a free software popular software:
http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your new bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope you
not to make this decision).

Tags: Windows

Similar Questions

  • How can I create a bootable for XP home CD

    How can I create a bootable for XP home CD?

    If by chance you reinstall xp sp2 via cd, you can create a bootable cd of xp sp3 via a method called "slipstreaming".

    It is relatively easy and requires files sp2 from your cd to merge with the update to sp3 from microsoft, and then make an iso to burn it to a cd.

  • I need to make a usb bootable for windows 8.

    Bootsect.exe

    I can't download the bootsect.exe from the store.  Only get the file iso32 integer or an image file or download... Manager what is the problem?  I need to make a usb bootable for windows 8.  I am running windows 7 32 bit.  What's wrong with the instructions for download

    Go to the Microsoft Store website, sign in with your bank account, select Download Options and select Windows 7 64 bit and proceed to download.

    1. connect to your Microsoft Store account to view your purchase history

    2. search for your purchase of Windows 7.

    3. next to Windows 7, there is a drop-down list "additional download options.

    4. in the drop-down menu, select "32-bit ISO."

    5. right click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).

    6. once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

    or

    (1) download and install the Windows 7 USB/DVD Download Tool program, as described on the Microsoft Store website.

    (2) download a 32-bit version of bootsect.exe work. Here is a link to the 32 bit bootsect.exe:
    http://www.SevenForums.com/attachments/installation-setup/47060d1263222191-32-bit-Bootsect-bootsect7600x86.zip
    From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

    (3) once downloaded, copy the BootSect.exe file in the same folder that contains the file Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

    (4) application of the Windows 7 USB/DVD download tool as indicated on the web site of Microsoft Store. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  • Trying to create the repair disk. I get incorrect parameter 0 x 800 70057

    I am trying to create a repair disk after installing Windows 7 Professional. I get "parameter is incorrect0x80070057.

    A prompt by right clicking and select "Run as Administrator"
    and then at the command prompt, type: chkdsk /f r, then press the Enter key.

    If you are asked to plan the volumn to check the next time that the system restarts,
    Enter: y

    If you know the manufacturing of your hard drive you can also download their diagnostic software.

    Another use: SpeedFan has an online health analysis function
    (SMART tab) for hard drives. It will show how your disks
    compared with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    ========================================================================

    Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

    Click on start / all programs/accessories then
    Right-click on the command prompt option and select "Run as Administrator".
    (or "Safe Mode" open a command prompt)
    At the command prompt, enter: SFC/scannow

    Windows 7 - order SCANNOW SFC - System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
    http://support.Microsoft.com/kb/928228

    J W Stuart: http://www.pagestart.com

  • Microsoft has a software that cleans, repairs and fix registry errors for free?

    Clean and fix free registry errors

    Microsoft has a software that cleans, repairs and fix registry errors for free

    On Tuesday, January 18, 2011 20:38:14 + 0000, Tinaya says:

    Microsoft has a software that cleans, repairs and fix registry errors for free

    N ° and stay away from all these programs.

    Registry cleaning programs are all snake oil. Cleaning of the
    registration is not necessary and is dangerous. Let alone register and
    do not use any registry cleaner. Despite what many people think, and
    What software record cleaning suppliers are trying to convince you,
    have unused registry entries is not really make you hurt.
    The risk of a serious problem caused by a registry cleaner by mistake
    delete an entry you need is much greater than any potential benefit
    It can have.
    Read http://www.edbott.com/weblog/archives/000643.html

    and http://aumha.net/viewtopic.php?t=28099

    and also
    http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

    Let me stress that neither me nor anyone else who warns the
    use of registry cleaners never said that they always cause
    problems. If they have always caused problems, they would disappear from
    the market almost immediately. Many people have used a registry
    cleaner and never had a problem with it.

    The problem with a registry cleaner is that it carries with it
    the risk of a significant problem. And since there is no
    benefits of using a registry cleaner, running that risk is a very bad
    good deal.

    Ken Blake (MS-MVP)

  • How to create the icon on the desktop just for SilverLight?

    How to create the icon on the desktop just for SilverLight?

    Hello

    • Why is it you are wanting to create a shortcut?
     
    Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same.
     
  • Startup Repair is checking your system for problems... and for the last ten hours!

    Apparently, during Windows updates last night, my laptop itself cut because it became overheated.  When I tried to turn it on this morning, it would not load my login screen, giving instead a screen empty and dark.  Now, he goes through the Startup Repair tool, where it says repairs to try with a blue bar moving, below which it says repair disk errors, it can take more than an hour to complete.  The problem is that he has done this for more than ten hours now with no sign of whether or not it works.  The screen shows exactly:

    Startup Repair is checknig your system for problems... If problems are found, Startup Repair will fix automatically.  Your computer may restart several times during this process.  No changes will happen to your personal files or information.  This may take several minutes.  Attempt to repair... Repair the disk errors.  It may take more than an hour to complete.

    Help, please! My laptop is only a year old and I backed up my files not recently (there are several important to me).  If he finishes by turn on normally? What is happening with it?

    Hi Ali,
     
    Do you remember the update (S) that caused the problem to occur?
    Remove all external devices (i, e printer, USB devices) and check.
     
    In the meantime, follow these steps and see if it resolves the problem.
     
    Step 1:
     
    If you have the Vista installation disc, I would suggest you start in the system recovery options and do a System Restore to the point that your computer was working normally.
     
    Step 2:
     
    Once your system is restored, manually install the Windows updates to determine which update caused the problem to occur.

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • You try to create VHDX or another format not supported for this version of the server

    Hello

    I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

    After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

    End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
    at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
    to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
    at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
    5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
    at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
    at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

    We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

    I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

    Thank you

    Hello

    I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

    Concerning

    Paul

  • Create the web icon using BlackBerry plugin for Microsoft Visual Studio

    Hi all...

    I am very new to the blackberry application development...

    I want to create web icon on blackberry. I use BlackBerry plugin for Microsoft Visual Studio

    Please give any link sample code or reference on how to create a web icon using BlackBerry plugin for Microsoft Visual Studio.

    Please its urgent.

    Thanks in advance.

    There are two ways that you can do with a BlackBerry.

    (1) you can push an icon on the desktop of users using push of BES or the new WebSignals.  This method requires no code peripheral side, but it requires the code side Server integrated with the BlackBerry Enterprise Server (BES) or our WebSignals public service

    (2) you can create a small Java application that is installed on the device that launches the browser to a specific URL.  You will need to Java plug-in for Eclipse to get there.

  • How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1?

    Hi all

    I am trying to disable some built-in options for all modules as well as all users in paragraph 6.1.1.1.

    How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1.?

    Please help me solve this problem.

    Thank you

    Nefertari

    Thank you Ivy, Yes.

    I made some changes more in environment settings that helped me to turn off the button the user create a user/edit.

    Thank you

    Nefertari

  • Updated Firefox to v - 43.0 resulted in the message: "create a PDF file cannot be verified for use in Firefox and has been disabled."

    Updated Firefox to v - 43.0 resulted in the message: "create a PDF file cannot be verified for use in Firefox and has been disabled."

    A solution to this problem will be appreciated.

    Thanks in advance

    Hi stephenm26904611,

    Thank you for your bug report about the extension to create a file PDF Acrobat being disabled in FF v43.

    It is a known issue and we are working on that.

    We intend to provide support in the future updates.

    Meanwhile, as a solution, you can use Adobe Create PDF extension for Chome and Internet Explorer, or use Acrobat to convert web pages to PDF.

    Thank you

    Nicos

  • Can I create an action that includes a shortcut for the patch tool?

    I am trying to create an action that includes a shortcut for the tool room.  I changed the patch (now R) tool shortcut to be different from the correct place (J), it works fine on the keyboard, but it will not record in action. Is there a way to include this point in the action?

    Something do not have in stock, and there is no menu item for the function you want to save.  The easiest way around your problem is to create a tool preset for the tool part then record by selecting this predefined in your action patch toll to pass to the tool room.

  • How to create a menu button of 3 lines for navigation on a mobile site?

    How to create a menu button of 3 lines for navigation on a mobile site and do trigger the Accordion Panel? I created my first sites on Muse and can't seem to understand.

    Download icons FontAwesome and install it manually.
    https://fortawesome.github.IO/font-awesome/

    Add web fonts self-hosted | Adobe Muse CC tutorials

  • You will need to create an account only read in vcenter for acess... It is an AD account

    Any script for the need to create an account only read in vcenter for access... It is an AD account? Thank you

    I guess you must assign the ReadOnly to an account Active Directory on a specific entity in your vCenter.

    If Yes, you can do something like this

    $cluster = get-Cluster-name mycluster

    New-VIPermission-body $cluster - role ReadOnly-main "DOMAIN\account."

  • I have the plan of photography with photoshop and Lightroom 5. I tried to open a catalog I had created it said the photographs were again for the Lightroom I. I have a Mac and downloaded Didier, thinking I would get a new update of lightroom.

    I have the plan of photography with photoshop and Lightroom 5. I tried to open a catalog I had created it said the photographs were again for the Lightroom I. I have a Mac and downloaded Didier, thinking I would get a new update of lightroom. It did not. Should I expect Lightroom cc and extra cost that would be for me?

    Please open the app creative cloud on your computer and the gpo tot app tab. If you are not able to see the Lightroom CC listed, sign out and sign in the creative cloud.

    Here is the screenshot for how you can download the application from the creative cloud

    Thank you

Maybe you are looking for

  • Qosmio F750 - 3D is 3D (Win8) mode

    Quosmio F750 3D is a good laptop: its screen is full HD and 3D without glasses (3D without glasses) mode switch. I have improved my Quosmio F750 OF (model PQF75E) for years.However, 3 weeks, whenever I start the PC, the screen is in 3D mode.Therefore

  • RAM extension

    The ram can be extended to the 15-f059wm?

  • Icon email to blackBerry Smartphones

    Hi all I have a little problem, I entered my user name and then send the e-mail settings and then the icon email popped up and I was happy with that. But suddenly he disappeared, but I receive my emails in the messages icon, but I want my e-mail back

  • Message text blackBerry Smartphones icon does not disappear and the message is empty

    I (now 2) incoming text messages icons on my screen that won't go away.  The messages are of the same person.  When I opened the message there is no text, but when I close it, the icon remains as if I did not open the message.  I deleted this person

  • How to remove the footer fusion of the trace of the RTF to Excel BI publisher release

    Hi allI have a request for improvement where I create a report that has available to rtf and output power is like excel (xlsx).I created this report and there is a line merged under the last row of data in the report (line 14 in the image below).I re