Create a whole web page using cffile

I would like to create a whole web page using cffile...

It seems that the output attribute is where you put the content type:

output = 'this is a test. "

«"Q: so how can you add fully content inside... out .htm ="»
... where there are a lot of other quotes?

(if it's 'leaks' characters - I need help with this.)

Also: is it possible that the content may be a few data combined with a cfinclude - I get errors when I try this...

You might find useful the CFSAVECONTENT tag.
http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=Tags_r-s_10.html#1844410

Tags: ColdFusion

Similar Questions

  • (not a problem) Web pages using your name in advertising!

    I recently fell for a whrn ad in a Web page, I know it was my fault, but the Web page uses a layout and images of your Firefox so that I learned it was you. Of course you had nothing to do with this but it has happened when I enterd a completely undepended site.
    I wanted to especially know you that i nothing else going on, I'd printscreen it he Swedish since im here hope I could just to warn you, but you have not seme to have this possibility.
    The url is below, don't know if it'll popup outside Sweden tho.

    Good luck TobbeB

    http://web.prize3.com/readys/Browser%20survey/%28tablet%29/v3/translated/index-se-se.html?voluumdata=vid..00000001-b4e6-425f-8000-000000000000__vpid..c140c000-0138-11e4-8fdc-d0e3ff0d1a41__caid..b8eeffed-7787-4cbd-9b35-df607542079a__lid..f0579a69-2306-4ddf-a0d4-918d59f86942__oid1..52ce9630-4e90-46ef-81bc-fb0174d35160__oid2..1779bb3d-2355-49ea-ad6e-29767ef11d2a__oid3..04316a64-8474-4610-a434-406b8839f551__var1..romeo-bay-EfhMNDYW__var2..torrentz__var4..2049

    The main place to really point out any use abusive what whatsoever associated with including Firefox Mozilla is to http://www.mozilla.org/legal/fraud-report/ that I doubt that the FBI cares about this.

    The link is http://web.prize3.com/readys/Browser%20survey/%28tablet%29/v3/translated/index-se-se.html

  • Impossible to print a Web page using photosmart premium c309a using Internet Explorer 9.

    I just installed Internet Explorer 9. Now, I can't print a Web page using my network photosmart premium c309a. I also have a Photosmart c6250 networked and I peut print for her. What gives? Am I missing something? I know that this is a known problem by searching the problem and Windows solution does not help.  I have no problem with the c309a print when I go to the internet, it's just a problem of Web page with IE9.  All/any help would be appreciated.

    HP helped me by making me install a different driver. Download and install the printer driver 6980. After installation, go to the printer properties and add a new Standard TCP/IP port and use IP address for the c309a.  I don't think I'm missing something, but I received the information from their chat support.  Then, when you want to print from IE9, choose the 6980 printer (which is actually the c309a printer).  This HP support doesn't help.  You must talk to a living person who knows something about printers.

    I hope this helps.  In fact, I switched to Mozilla Firefox as my default long ago, and it works very well with the c309a printer.  I only got this solution because I could be chatting with them on another printer and I mentioned that I could not print from IE9.

  • I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

    I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

    Thanks Abhishek,

    already, this option was unckecked. But miraculously it works now (after spending hours trying...).

    Beste, Geert

  • Cannot create a new web page.

    I have a website and a blog set Contribute. If I navigate on the web site, index page. You then hit connect. So far, everything is ok. If I file > new or hit the new button on the tool bar I get a new black blog page. I discovered a way around, he had to use the link toolbar and click New. Then I see the dialog box with the option create new black or new model-based. Then I go back to the original page and remove the link that has been packed.

    Any ideas what I need to do to create a new page based on a free template of must create a link I don't want first?

    Steve Fredrick
    mailto:[email protected]
    Steve Fredrick photography - home
    SFredrickPhoto - Blog
    It's the light towers

    Hi Steve,.

    Can you check in preferences in Contribute in the Blog Defaults section, if the box - "Create a new blog entry, when you click on the new button" is checked? If so, you can uncheck it and check whether you are able to create new web pages.

  • Web page using the browser of centering



    Hello

    I created my web page for screen resolution 800 x 600.

    When a spectator to my Web page put their screen at a higher resolution, say 1152 x 864, my web page moves to the left side of the screen, leaving a blank space on the right.

    How can I get my web page to stay in the centre, i.e. the middle of the screen, when a higher resolution is used by the Viewer. I noticed that microsoft.com has achieved this when my resolution is greater than 800 x 600.

    Thanks for any help.

    WebTime

    Use a table that is set to the Center to align for the site?

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.dreamweavermx-templates.com - template Triage!
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
    ==================

    "webtime" wrote in message
    News:eit96n$92t$1@forums. Macromedia.com...
    >
    >
    > Hello,
    >
    > I designed my web page for screen resolution 800 x 600.
    >
    > When a spectator to my Web page put their screen at a higher resolution.
    > say
    > 1152 x 864, my web page moves to the left side of the screen leaving
    > a
    > virgins of space on the right.
    >
    > How can I get my web page to stay in the Center, i.e. average of the
    > screen.
    > when a higher resolution is used by the Viewer. I noticed that
    > microsoft.com has achieved this when my resolution is greater than 800 x
    > 600.
    >
    > Thanks for any help.
    >
    > Webtime
    >

  • My web page uses svg images, but when the svg is printed by Firefox they are pixelated with bad resolution.

    I realized a web page that uses svg images. One of them is here:
    http://donwagner.dk/JZSS5.4.svg.

    The svg is produced by Adobe Illustrator, CS5 version. Seen in any browser, the images look good at any magnification, but when I print the page in Firefox, the image is blurry seriously, apparently because that pixelation uses the wrong resolution.

    The same phenomenon occurs in all browsers, not quite as bad in Chrome, but still not perfect.

    Do you have plans to fix this bug, or do you have a work around?

    Concerning
    Don Wagner

    Better control your graphics drivers are updated!

  • Open full Web page using Windows Vista Edition Home Premium

    Hello: I just got directions and saved in the folder my documents as "complete Web page.

    How to open (or what I can) the file?

    This is my first time using this forum.  So if I need to be more specific, let me know.

    Thank you.  Carolyn S.

    It's weird.  If you use Chrome, however, I'm not familiar with it.  I would try to save the website using Internet Explorer save option instead.

    Another method is to choose Print, but use the "Microsoft XPS Document Writer" printer, which saves the Web page in a saved file (similar to an Adobe PDF file).

  • Cannot print Web pages using network printer.

    I have a dell computer in 2012 and I am connected to a network printer. I am able to print from Word, Excel, pdf documents, but I am not able to print something directly from the web. Y at - there someone who can help and give ideas as to what is causing my printer to print from a limeted source.

    OT: Network printer

    Thank you

    Hello

    1. What is the brand and model of the printer?
    2. What is the accurate and complete error message you get?
    3. don't you make changes to the computer before the show?
    4. what web browser are you using to print Web pages?

    If you use Internet Explorer to print from the Web site, I suggest you try the steps from the following link:

    I can't print or preview before printing a Web page in Internet Explorer
    http://support.Microsoft.com/kb/973479

  • I need to read a pdf document or a web page using the Narrator

    Original title:

    Narrator

    Y at - it a Update for Narrator to 8 X 64 Windows because I can't not to read anything! It will say my main features or open the window on or off, turn off, but it will not READ! very frustrating. I'm not blind, but my eyesight is poor, so I thought I'd give it a try, but I can't read something important. It will read a header or strikes (that I don't need) I need to read a pdf document or web page.

    Hello Tracy,.

    Please, press the logo Windows + ENTER key to start Narrator, and then minimize windows accordingly. Done this, open the page/document you want to read, and then press SHIFT CAPS LOCK + H.

    It reads the current page/document? You use Internet Explorer?

    Also make sure that other settings in the Narrator is correct.

    Reference:

    http://Windows.Microsoft.com/en-us/Windows/hear-text-read-aloud-Narrator#1TC=Windows-8

    Please let us know the status of the issue.

  • Cannot print the web page using Mozilla

    Hello!

    I hope someone can help us!  We just bought a printer HP all-in-one Officejet 6500 E709n series.  It is connected running.  We can print web pages of Internet Explorer and can copy and scan.  However - we do not like to use Internet Explorer.  We use Mozilla Foxfire.  (For security). The printer will not print web pages when we use Mozilla.  We assume it has something to do with maybe a firewall connected to Mozilla, but we do not know how to get around that.  Can someone help us with this?  Thank you very much.

    Blessings,

    Elaine P.

    Your problem could result in requesting the addition of HP Smart Web Printing browser attempts to load for an older version of firefox, the latest version of Firefox 3.6.3 detects add it in and disables it.

    If this is the case, you can upgrade to the latest version of Firefox or uninstall HP Smart Web Printing from the control panel.

    I hope this helps.

  • create pdf from web page IE 11

    bought a new computer with windows installed 10. IE 11 will not let me create a PDF from a web page unless I have disable IE protected mode. When I click Create file its supposed to create pdf it tells me that it does not find you? I tried also to pdf creator and it also gives me the same prompt and only works in non-protected mode as well. However, my other computer which has windows 7 pro with IE 11 acrobat Pro DC worked fine. and when I he classified 10 Windows I have no problem at all. Adobe engineers and Dell tech have tried everything and I mean everything without success. When I contacted Microsoft they asked me if it worked on board... well duh that ended the conversation.

    Thank you for reporting the issue. It is a known problem and the engineering team leans on it.

    Concerning

    Tanvi

  • Cannot create PDF from Web Page with Certificate error. Error: "problem with SSL H99350"

    Is there a way to bypass it through some Adobe Acrobat settings? Maybe a way to get Acrobat 'trust' of the site?

    In Internet Explorer, I can simply click, "Continue to this website (not recommended)" and Web page will open, but Adobe Acrobat does not give me a similar option.

    I also tried to convert the Adobe Acrobat in Internet Explorer add-in, however, it does not have the same options, such as the number of levels down, copy Web site (I need to copy the entire site).

    Installation program:

    Windows 7 Enterprise SP1

    Acrobat Pro 10.1.15

    Capture Web site:

    https://www.kernelmodular.com/

    Hi rickreyna,

    Please refer to this topic SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. I have , might be useful.

    Kind regards
    Nicos

  • How to enter data on another web page using Java

    I'm just tarting out in Java, so I apologize if this question sounds stupid.

    I want to get entry (i.e. of MSFT stock symbol) to a web page (www.dividendinvester.com) with the help of a Java program. Is this possible and if so can provide you an example with me, tell me where I need research or the best expression of how a search for this type of problem. After a Google search for a few days, I have yet to find an example of this fact.

    Thank you!

    Hi, I assume you want to write a robot. This means you want to simulate the user enter data and submit the forms on a web page.
    It's simple, apache HttpComponents is a fantastic tool that allows you to authenticate, store and use of cookies, display data, or download them and the process of web resources.
    Download firefox and add addon Firebug.
    Visit the Web page you want to publish data on this subject, trace web applications page sends when you click on the "submit" button.
    Then, you can simulate these actions with your java program.
    Here you can see some examples:
    http://HC.Apache.org/HttpComponents-client-GA/examples.html

  • Why can't I download successfully web pages using FTP?

    I recently installed Adobe Dreamweaver and connected to a remote server where on my existing Web site files are stored. I then could call web pages from my local site, make all changes and upload them successfully (via FTP) on the remote server.

    Problem started occurring when I received a prompt Dreamweaver advising me to change the name of the folder root of my Web site of no name 1 of Web folder to the actual location of the files on my hard drive i - Mac. In doing so, I moved the path of the site and changed the name of the root fokder.

    Since then, when I make changes on a web page stored locally and try to upload it to my server (by clicking the arrow to the top 'put'), the operation appears to be performed correctly. But when I test the revised page on another browser (like Safari or explore MI), no revised web page appears.

    To try to remedy the situation. I'm afraid I've been digging a deeper hole and may have screwed up things even further.

    Help!

    Nancy - we finally solved the problem - the correct files (which reflects the revisions of the Web page) have been transferred to a separate file on the remote disk. By revising the name of the folder root of the remote control (go, we were able to get the revised pages downloaded to display in browsers independent. (I had to empty the browser cache yet however).

    Thanks for your help.

    JJeff888

Maybe you are looking for

  • HP Officejet 4630 all-in-one printer print cancels in the workplace

    HelloI recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer recei

  • Win 2003 Server installation problem

    Hello everyoneI am trying to install Windows server 2003 32-bit downloaded from Microsoft VLSC of my Microsoft account. I downloaded all available versions and I'm trying to start a server x 3250 M3 of IBM, but without success. The same problem occur

  • Team Viewer

    everyone knows a company/site as above and who claim to represent Microsoft known as Tec support.

  • Adding version 9.0.2 PS6110 to a group with one Member running 8.1.3

    I have an existing PS6210 running Firmware PS 8.1.3 production. It is the only member of the group, eqlgroup. We have acquired a PS6100, I spun it and it is a member of his own group, eqltestgroup. The PS6110 is currently running Firmware PS 8.1.4 an

  • T43p 2668-Q1U AC adapter required

    Hello all,. I bought a T43 2668-Q1U to a tailer. My question is with so many numbers from IBM for their accessories, I saw on the support page for this type and model a 1017 P 92, 19, and 21 are the correct cards. Also, a 02K 6699 on the accessories