Create another (Spanish) user in the login page

Similar Questions

• using connection security built-in to return the user to the login page

  I use integrated security of CF users to connect to my site. User is disconnected after timeout of 30 minutes. All controlled by application.cfm
  
  The problem is, if the user is on a page with frames, and the time-out occurs, the two frames in the page display the login screen.
  
  Is there a way to get around this?

  I Googled what you have asked and found several solutions. Thank you.

• I created several users, all have administrator rights, however... that one user appears on the login page. Help...

  New iMac, I created 3 users, all who have administrator access.  However, only one user and the guest user appears in the login page... .in order for me to move on to the other two admins I have to identify you so that a user, and then sign out... at this time I am able to see the other two users to the login page.  How can I fix this?

  Are you using FileVault? If so, you need to allow other users unlock the screen. Or turn off FileVault.

• How to prevent the login page in the same browser when the user is already authenticated

  Hello

  I use Jdev 11.1.1.6 with ADF implemented in my application security.

  I have Login.jspx that redirects the user to Home.jspx on a successful authentication. The user can either enter the URL of the Home Page or Login.

  Please consider the following scenarios:

  (a) the user is not authenticated in the current browser session

  (a.1) if the user enters the URL of the home page and the login page is displayed and redirected to the homepage on authentication

  (a.2) if the user enters the login page URL, then the login page is displayed and redirected to the homepage on authentication

  (b) the user is already authenticated in the current browser session, a new tab opens and

  (b.1) if the user enters the URL of the homepage then it shows directly the (already authenticated) Homepage

  (b.2) if the user enters Login URL then connect a page appears - This is the issue, it should either user to the homepage or invalidate the existing session and let users to proceed again.

  How do I get there? Any help is appreciated.

  Thank you

  JAI

  Hello

  the authentication check must be in a phase listener or servlet filter. If you use a phase listener and the homepage and login have a link associated with the ADF (PageDef file) then in the phase AFTER RESTORE_VIEW, you can use AdfContext.getCurrent () .getSecurityContext () .isAuthenticated () to tell if a user is authenticated or not.

  Frank

• How to create the link in the login page

  Hello
  
  I want to create 'Reset password' link in the login page just below the "login" button and when you click on this link to reset password page should appear.
  I have not any type of page as a link element. Please help me to achieve this goal.
  
  Thank you and best regards,
  Jean Blaise

  Hello

  You must set 'Escape special characters' to 'No' of security point section

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• How can I redirect to the login page when the client disconnects?

  I use {module_logout}, how do I redirect to the login page when a client disconnects?

  Thank you for posting.

  You can redirect the user to the login page using a small java script code. Please visit the following link http://kb.worldsecuresystems.com/598/bc_598.html#main_Redirecting_to_another_page

  See you soon,.

  Scott Raj Rouanet

• How to create a text that links to another page in the login page

  Hello
  
  I need this more basic things, but no one seems to be asking here.
  
  In the login page, I want to add a "Register" text when you click on sends the user to another page to register.
  
  With a button, its simple because its built-in, but I don't want a button, just that: register
  
  I also want to have the text in colour not black.
  
  
  
  
  Thank you.
  
  Leckraj

  Like this

  "Register " 
  

  Use your Page URL ' f? p = & APP_ID.: 2: & SESSION.' instead of #.

  Thank you
  Adkins

• Windows 7, last user in the login screen and 'User', losses other accounts in the login page

  I am running Windows 7, it was a new installation. Since I set up my machine, I created 3 accounts in my system and in the login page I always had the possibility to choose one of these accounts.

  1 user 2 3

  Since last weekend, when I try to change username, I have just the last user who was logged and a "Different user" option (no image that it incidentally) where I need to type the name of the user who wants to go to and the password.

  Last known--> if another user select this--> I need to type the user name and password for the user newactive

  How to restore the possibility of having all my 3 available users in the form of connection with their photos?

  Thank you!!!

  I would like to use system restore to set up Windows in three days.

• Redirect the user to the previous page after login

  Hello
  
  The login process on page 101 of the application redirects the user to page 1 after successful login. If the user is currently on page 9 of the application, the session expires and the user is redirected to the login page. Now when the user connects again, can redirect us the user to the page 9 instead of page 1?
  
  Thank you
  Machaan

  Tony, when the session expires after idling, wouldn't the point of application is invalid and so no point of application of the new session value any?

  Machaan,
  My suggestion would be to save the current page to a variable preference of the user (by saving it to an application process that is running on the page of each page load). Extract the value of this preference after connection and redirect to this page (owa_util.redirect_url) if it is not null. On logout, delete this preference, so that you are not redirected to this page in the next connection.

  Note that the implementation of your condition (using any approach) could lead to problems that you might want to consider.
  For instance if the user was in a page that has a dependent process/calculations onload on some elements of the page (another page set) as would be the case with a child page/edit record of pages; It can generate many unforeseen errors when you connect and redirect to this page without setting any of these elements.
  Another case would be when these pages were opened in pop-up windows or the content of the iframe (and which should be called in a different page) and the parent page has expired without any submission (so once again is the child page last page)

• Create Unique Session Variable based on the login page

  Hello:

  I'm building a dynamic website with Dreamweaver CS5 with Coldfusion 9.

  My question is how can I set a session variable to read a certain value. It is currently when my clients go to the login page they enter their username and password. I was able to create a session variable that contains the user name as value. So in all their pages read Welcome website "all that was their connection username. Now, I want to get the session variable to read the same table but the different FullName field. This way, that the web pages will say Welcome "FullName (based on their login user name)" I tell myself that I have to configure a query parameter, but after trying and failing for four hours to produce a successful result, I resorted to post my problem here. I appreciate the help and advice.

  My information:

  DataSource = Table 'Access' = 'Logininfo' (current) land (for the session variable) = 'User_name' (desired) field (for the session variable) = "full name".

  Currently using (server behaviors: Variable de Session) MM_Username on each relevant page for the user.

  My sign in page code is as follows:

  Head:

  < IsDefined ("FORM.username") cfif >

  < cfset MM_redirectLoginSuccess = "members_page.cfm" >

  < cfset MM_redirectLoginFailed = "sorry.cfm" >

  < "MM_rsUser" datasource = cfquery name = "Access" >

  "SELECT AccessLevels FROM Logininfo WHERE username, password, username, FullName is < cfqueryparam value =" "#FORM.username #" cfsqltype = "cf_sql_clob" maxlength = "50" > AND password = < cfqueryparam value = "#FORM.password #" cfsqltype = "cf_sql_clob" maxlength = "50" >

  < / cfquery >

  < cfif MM_rsUser.RecordCount NEQ 0 >

  < cftry >

  < cflock scope = "Session" timeout = "30" type = "Exclusive" >

  < cfset Session.MM_Username = FORM.username >

  < cfset Session.MM_UserAuthorization = MM_rsUser.AccessLevels [1] >

  < / cflock >

  < cfif IsDefined ("URL.accessdenied") AND false >

  < cfset MM_redirectLoginSuccess = URL.accessdenied >

  < / cfif >

  < cflocation url = "' #MM_redirectLoginSuccess # ' addtoken ="no">"

  < cfcatch type = 'Lock' >

  <! - the timeout of cflock management code - >

  < / cfcatch >

  < / cftry >

  < / cfif >

  < cflocation url = "' #MM_redirectLoginFailed # ' addtoken ="no">"

  < cfelse >

  < cfset MM_LoginAction = CGI. SCRIPT_NAME >

  < cfif CGI. QUERY_STRING NEQ "" > "".

  < cfset MM_LoginAction = MM_LoginAction & "?" & XMLFormat (CGI. QUERY_STRING) >

  < / cfif >

  < / cfif >

  Body:

  Connection < h1 > < / h1 >

  < p > please enter your login information the registration form in order to access your member account page. < /p >

  < form ACTION = "" < cfoutput > #MM_loginAction # < / cfoutput > "method ="POST"id ="login"> < table width ="auto"border ="0"align ="center">"

  < b >

  < td > < label for = "username3" >

  < div align = "right" > user name: < / div >

  < / label > < table >

  < td > < span id = "sprytextfield1" >

  < input type = "text" name = "user name" id = "NomUtilisateur2" accesskey = "n" tabindex = "10" >

  < span class = "textfieldRequiredMsg" > a value is required. </span > < / span > < table >

  < /tr >

  < b >

  < td > < label for = "password" >

  < div align = "right" > password: < / div >

  < / label > < table >

  < td > < span id = "sprypassword1" >

  < input type = "password" name = "password" id = "password" accesskey = "n" tabindex = "15" >

  < span class = "passwordRequiredMsg" > a value is required. </span > < / span > < table >

  < /tr >

  < b >

  < td colspan = "2" > < div align = "center" >

  < input type = "submit" name = "submit" id = "submit" value = "Login" accesskey = "n" tabindex = "20" >

  < / div > < table >

  < /tr >

  < /table >

  < / make >

  < script type = "text/javascript" >

  var sprytextfield1 = new Spry.Widget.ValidationTextField ("sprytextfield1");

  var sprypassword1 = new Spry.Widget.ValidationPassword ("sprypassword1");

  < /script >

  I'm sure it is something simple and will show my status as a rookie for the asking, but thanks for your help!

  A session variable is also the best route to go? I'll use this to query databases to display and allow them to change contact information, also show their invoices and request services.

  I don't know CF so forgive me, but you can create a session for fullname variable or use a query on your pages to filter the data WHERE username = user session variable. Looking at your code, it looks like you can add a session to the full name variable here:

• How to use the login ID of the user on the following pages?

  I use Spry in DW CS4 tools with files written in PHP and have successfully created a login page that validates the ID of the user (which corresponds to their e-mail address) and subject to password on a database of MySQL with a user table. The user's table also contains fields such as first/last name, address, telephone, city/province/postal code, so it is not just a username (email address) and password.

  If the problem is the following. When the user connects, they are routed to a page "member account" where I want to display a dynamic table showing their first/last name, address e-mail, address, city, State, zip and phone number, so they can view their current settings.

  Trying to use the advanced record set tool, I can see where I would do a select on the table of the user for different values, but what should I use to select the information for the user who has registered? I tried various forms of a session variable (I looked at the code on the login page and found $_SESSION ['MM_Username'] and tried it on the Member account page) and I also tried of $_POST ['email'] using a where clause clause, but he never seems right because I get errors.

  I decided to back off to the help of the table for a little bit and just try to display the name of the user logged on successfully since the previous login page, but I can't even do it right.

  Any ideas of how I can use the e-mail address of the user connected to the Member account page to retrieve data correctly (or even to print Hi John Doe)?  I guess I'll have to also use a similar technique when they click on an "edit my account" link on the account page member to change their current settings (assuming that I can display them properly on the Member account page so that they know that something needs to be changed or not).

  Thanks in advance,

  Steve

  Instructions on How to view the name of the user after connection located in the Dreamweaver FAQ.

  To use a session variable (or any other variable) in a SQL query in the advanced Recordset dialog box, you must use a placeholder text in the query, for example, col1, col2, etc.. You then set the value of execution of col1, col2, etc in the variables of the dialog box by clicking the button "+" and adding each one variable at a time.

  For example:

  Name: col1

  Type: text

  Default value:-1

  Running value: $_SESSION ['MM_Username"]

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• Allow the user to change the password on the login page.

  Hello
  
  How to allow the user to change the password on the login page?
  
  Thank you
  
  Gargi

  Elodie:

  The appeal of the procedure should be as below

  apex_util.CHANGE_CURRENT_USER_PW('hello');
  

  CITY

• Help me to change user name and password on the login page text

  Hi all
  
  My requirement is to change the username and password text on the UID and PWD connection page
  
  I followed the steps in the Guide of Oracle Access Manager Customization Chapter 4
  
  But he is not having changed in the login page
  
  Please help me
  
  Thank you.
  
  Published by: user10648177 on December 1st, 2008 01:02

  Hello

  What you really need to do is edit the oblix/lang/en-us/msgctlg.xsl file, change the values of the variables MUserName and MPassword as you want and restart the server identity. Of course, if your language is not en - us, you need to interpret the above path accordingly.

  Where did you find the instructions you need to change the oblixbasemsg.xml?

  -Vinod

• URL, Cordova, MAF JS API on the Login Page

  We have difficulties to use the framework for a simple use case.

  On our custom log in HTML page, we want to add an anchor linking to our public web server where new users can register online.  All of our application is secure, which means an external URL feature is not an acceptable approach.  We must be able to navigate from the login page, to the registration page and back without using an external URL feature.

  Our first approach was simple.  After you add our domain to the whitelist of applications, we added an anchor with the URL as the HREF link.  (We also tried invoking window.open and setting window.location.href with JS).  If we add a basic anchor to the login page, the display of web pages embedded MAF navigates to our registration page, but there is no Back/fact/Close button.  Users cannot return the liaison, which is unacceptable.

  Rejecting this option so we thought that using the plugin Cordova InAppBrowser would do a better job.

  We tried the initialization of the MAF JS API nothing helps.  The Oracle online documentation shows how to add references to javascript base.js to a custom page of springboard, which allows access to Cordova, Cordova plugins and the API of JS MAF.  This same code doesn't seem to work for a custom login HTML page.  The 'showpagecomplete' event does not fire, and while the structure of the object and the JS API methods are built (adf.mf.api, adf.mf.el, etc.), called methods never call reminders of success or error in what we spend.

  Without the MAF JS API, we cannot access Cordova or the InAppBrowser plugin.  We have tested this plugin on another page AMX, so that we know that it has been installed successfully.  He can do what we need, if we can call it from our login.html page.

  Are we barking the wrong tree?  How can we add a simple link from the log in page, while allowing users to close the loaded HTML page when you're done?

  ENVIRONMENT:

  JDeveloper 12.1.3.1.41

  MAF 2.1.1.0.41

  Xcode 6.2

  10.9.5 OSX

  Early 2011 Macbook Pro

  Post edited by: rsmith248 Miskeyed JDeveloper version number.

  Hello

  Have you considered showing your registration page server side in an iframe?

  It is a simple but powerful technique to remain in the web view of your MAF application with full control over navigation (back).

  Steven Davelaar,

  Oracle Mobile & Cloud A-team.