Create custom jobs sleep and wake-up
Hey people, I'm looking for someone who is a little geekier then I have helping me fit these tasks.
What I want to do is, PC
#1 switch mode 'sleep' when it has been idle longer than 10 minutes beginning at 10:30 and ending at 02:30.
#2 wake up at 05:55.
It was working fine until I disabled the two tasks for a few weeks, because I wanted the PC to stay on 24/7, and then re enabled them.
The PC wakes up now at 05:55 (while leaving no log entry in the task history), then the task of "put the pc to sleep" he puts to sleep 15 minutes later.
"Wake PC.xml.
"Put the PC to Sleep.xml '.
In my view, that it is a question too simple for TechNet. I was able to get the conflict. I also changed the task of awakening to do something useful instead of running just an empty cmd.
I now update the signature for MSE file. Please mark my answer as the answer. I paste in the task that is exported for someone else who may want to use it.
-' Wake up the PC.
-
-
-
-
-
-
-
-
-
-
-
-"Put the PC to sleep '.
-
-
-
-
-
-
-
-
-
-
-
-
Tags: Windows
Similar Questions
-
HP 15r205tu: i3 5010u, uncore after sleep and wake up power consumption increases
After start of the uncore cpu power remains unused 1W (according to the CPUID HWmon) below.
If you sleep and wake up the laptop, then the uncore power increases to approx. 2W.
Time remaining on the systray icon is touched by it.
Navigation on the duration of use of a low-power battery is reduced after sleep wake cycle.
Is this a known issue? Is there a solution?
Thanks for the post and suggestions.
Now, I know what has caused this problem. I had turned off the network adapter cable into the Device Manager to save energy!
This caused the uncore somehow to go crazy and pointing up (only after the day before). Now, I have activated the wired lan card and all is well. The laptop can be used for about 9 hours on battery power saving mode now sometimes the loading of web pages.
Thanks again.
PS: If any unused pci express port is disabled it can lead to the same behavior.
-
Original title: MediaDirect problems
I have a Dell Studio 1535 under Vista Home premium 32-bit. My computer has Media Direct installed, and lately the Quick Launch button stays on permanently. Whenever I put my computer in mode 'sleep' and then wake him up, I am presented with the problem of my computer being off does not correctly... How can I solve this problem?
Hello
1. What are you referring to whn that tell you immediately the Quick Launch button remains on constantly?
2. are you referring to the Dell docking station?
You can try to update the graphics card and check if it helps to solve the problem.
Updated a hardware driver that is not working properly
Also check out the Dell support link to download the drivers:
Hope this information is useful.
-
HP Envy m4 Windows 8 do not sleep and wake properly
I recently got a HP Envy with Windows 8 m4, and every time I try to sleep, he never goes in mode 'sleep'. I'm assuming, since fans are always running up and the power light is still on (not flashing). If I try to wake him up, he doesn't. I tried pressing the power button, by clicking on the mouse and trackpad and typing on the keyboard. I tried to change the settings of the Control Panel, but nothing seems to work. Any advice would be appreciated.
Hey yal! So, I don't know when it happened, but the problem is solved. I think that there is an update at some point, but I still am Kapersky and am able to sleep and hibernation.
-
iMac, sleep and wake up too often
I noticed the USB external climb the spinning very frequently on the occasions and I was wondering if anyone had some ideas. Today, some bozo was trying to hack my ssh key access only and I saw it in the system.log
20 Feb 11:02:20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4847 to 192.168.1.21.22
20 February 11:03:25 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4100 to 192.168.1.21.22
20 February 11:04:31 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.2682 to 192.168.1.21.22
11:05:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3920 to 192.168.1.21.22
20 Feb 11:06:24 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1139 to 192.168.1.21.22
20 Feb 11:07:27 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4675 to 192.168.1.21.22
20 Feb 11:08:27 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1067 to 192.168.1.21.22
11:09:30 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1077 to 192.168.1.21.22
20 Feb 11:10:30 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4604 to 192.168.1.21.22
11:11:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3898 to 192.168.1.21.22
11:12:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3846 to 192.168.1.21.22
20 Feb 11:13:24 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1178 to 192.168.1.21.22
20 February 11:14:26 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4497 to 192.168.1.21.22
My question is why is go it mac sleep so fast and then wake up again when you access? Power settings are:
In use:
standby mode 0
Sleep on the power button 1
womp 1
halfdim 1
hibernatefile/var/vm/drag
PowerNap 0
gpuswitch 2
automatic restart 1
networkoversleep 0
disksleep 0
Sleep 10
autopoweroffdelay 14400
hibernatemode 0
autopoweroff 1
ttyskeepawake 1
displaysleep 10
standbydelay 1
A secondary question is why does have the external USB drive go upward because some accessible a network port? Nothing on the disc has been consulted.
Thank you!
You will need to turn off the wake for network access in the energy saving settings.
-
API bulk: creating custom objects, fields, and lists?
Hi all
I have searched and passed through the ticket of support for routing, but have not yet managed to find an answer to this question, so I thought that maybe the people who write the API would be the best ones to talk to
Anyway, in summary, my question is:-
Is it possible to create lists of contacts, the Contact fields and items customized by using the bulk API 1.0?
I know, it is possible to create new contacts and add them to an existing list, but I want to create a new list with the bulk API and then add my contacts on this new list.
Same kind of thing for the Contact fields. I want to be able to check if there is a Contact field and if not create one and then fill in the import.
Once again, even for custom objects. I know I can do a GET for all currently available Custom objects, but can I create a new using the API as a whole?
Any help would be most appreciated.
Thank you
Hi Chris,
You cannot create contact fields, shared lists or the custom objects through the bulk API (which in fact is a RESTful API), they must exist already.
You can use the REST or lists The SOAP API to create only shared the REST API to create the contact fields, but SOAP or REST currently supports the creation of custom data objects.
If you don't have it already, please take a look here, building on The Eloqua Platform - A Resource Guide and there REST API - Documentation for kernel objects that will hopefully more questions.
T.J.
-
Create custom ADF Formd and attach to the BPM man Task Form
BPM Suite 11g
BPMN Editor 11.1.1.7.0.0.97 Jdev version: 11.1.1.7.0
Jdev Build: JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493
I am trying to generate/create a form of the ADF for a human task form in which the form will be LOV (list of values) defined for the user to make multiple selection. How can I set this LOV in the form of the ADF? How can I use custom ADF form to create a custom like this form and attach it to the human task?
Thank you.
-Cedric
This will give you a few details-
http://www.avioconsulting.com/blog/using-database-driven-list-values-populate-BPM-variable
Nassima
-
Portege M800 - mode 'sleep' and wake up fails
Hi all
you just bought a new Portege M800 running Vista.
When the system goes into sleepmode or put into hibernation, there are not any what posisbility to wake up the system. I have to remove the battery is reactivated.
Downloaded and installed the latest version of the BIOS, does all the Vista updates. Also checked the BIOS, the wake on LAN and the wake of keyboard are enabled
Anyone else having this problem?Meanwhile, I've disabled hiernation and sleepmode in Vista, but this should not be the way to do it.
Any advice much appreciated
See you soon
DaveHello
I m not a Portege M800 owner but normally I would say that you should try to update the BIOS and install all Windows updates, but you already have it not.
What can you do now? If you have installed your own version Windows try again with the factory settings. Maybe it has something to do with software or then I don't know m.
If it doesn t work I think you'll need professional help to an authorized service provider. Technicians can check your parts defective laptop hardware and trade if it of necessary.
Here, you can search the nearest ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider
Welcome them -
Windows 7 is extremely slow going sleep and wake.
I timed it the other day; It has taken almost five minutes for Windows enter the mode 'sleep'. I tried to turn it back on, and it took literally five minutes before the logon screen appears. She does on a regular basis, and it starts to become very irritating. I tried to update my drivers, but Device Manager claims they are up-to-date. If it helps, I run the 64-bit version on a HP laptop with 4 GB of ram. The processor is an AMD Turion 64 X 2 TL - 60 to 2 GHz. I can provide more information if necessary. If anyone has any advice at all, it would be greatly appreciated. Thank you!
A problem of incompatibility for 7 with your chiopset drivers (ACPI). You can try to find the Win 7 drivers on the website of the manufacturer of the system and on Windows Update.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
I unchecked property "mouse shadow." After about 5 minutes of my violin with the other properties of the mouse, the cursor appears again. My computer is brand new.
Howdy,
I too have been looking for forums and playing with the power settings for days - it was driving me crazy!
I happy to report that I found a work around for this problem.
Simply plug your mouse / KB in a USB hub - I got a hub powered bus of really cheap 4 ports (one that does not require an external power supply). If you like your classic Intellimouse Optical as I do, it may be the solution for you.
Hope this helps someone.
See you soon.
-
Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window
Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?
Why I get this is event viewer? Source ACPI
The embedded controller (EC) data returned when none was requested.
The BIOS may try to access the European Community without synchronization with the operating system.
These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?
I used Windows 7 drivers.
Thank you
Hey mate,
I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.
About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?
I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.
-
Desktop image freezes, I put computer to sleep, he wakes up on his own and picture freezes. I have image change every 5 seconds. How can I fix?
Get a backup full system, like - especially if you use a Mac Pro with 10.6.8 - then your material is more old enough to be at fault.
Once you have a full backup and up-to-date... More information is needed:
What is the freezing of the entire or just computer screen background image?
Start in Safe Mode and stop and restart normally and see if that clears the problem.
If you have the anti-virus or anti-malware installed or any tool that claim to clean, optimize or protect, delete all those which, according to the instructions from the suppliers of package.
Open Console.app from Applications > utilities and look for repeat blocks of diagnostic messages. Some diagnostics will look alarming, but they are normal and expected. Looking for blocks that are repeated quickly. Post an article - usually five or ten lines at most - of any repetition of blocks. Please do not share more than one or two sections and lines not more than a hundred post or so and please do not post long blocks of repeat messages.
-
After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.
Please test after taking each of the steps that you have already tried:
Step 1
Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.
Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select
▹ System Preferences... ▹ Sharing
Disable all sharing services.
Step 2
If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.
Step 3
Select
▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off
Step 4
Select
▹ System Preferences... ▹ ▹ Advanced Bluetooth...
and uncheck the two boxes marked
Open Bluetooth Setup Assistant at startup if...
Step 5
Step 6
Back up all data.
Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:
/var/vm
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.
Restart the computer and empty the trash.
-
This program is best used to create custom, forms to say double surveys and networks, etc.
-
Computer goes to sleep and won't wake up
A few days ago my computer started not to wake sleep cycle. It goes into hibernation and don't wake up with a jerk of the mouse or by pressing the buttons on the keyboard. I put the display to sleep for 4 hours and 30 minutes, but she falls asleep before 4 hours are rising and then don't wake up upward. I have to press the button for a few seconds to do to turn off and then restart. If I press a button on the screen when the computer is in standby it gives me a message that the signal of the computer has been lost. Anyone has any ideas how to solve this problem?
Hello
Look at all the features associated with sleep and ensure that it is only sleeping and not hibernate.
Some computers sleep mode will not let you wake up mouse etc. You have to push short s to the power Witch (as mentioned above by WillTel).
It is possible that your computer never before slept and was just to go off the screen.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
Maybe you are looking for
-
Iwatch new version 3.0 - Frriends missing app
Whence the friends shortcut app and the app is gone?
-
I want to spend my macbook pro at el capitan to lion mtn but have lost my recovery disc. should I make a clone of my hard drive, or simply make another recovery disc. I don't want to start downloading CBS without returning MT so necessary.
-
I maintain a club email list by sending plain text commands to him such as: Subscribe to [email protected] members (If you're old enough you get an idea of which continues to use the web master). Thunderbird started attaching an invisible "mailto:" in
-
Portege 7020CT Modem Driver for Windows 98
Hello Having had to do a complete reinstall of win 98 I lost my modem driver. The one on the site does not work because they are all french pilots pcmcia. It is built in. Help.
-
Satellite L670 - unrecognized USB keys
I have a Toshiba Satellite L670 with Windows 7 64 bit Home Premium edition. Recently, I bought 3 keys usb SanDisk Cruzer, 2x8Gb, and 4 GB. Have you tried multiple USB ports on this computer, but the same result. The computer recognizes that the SanDi