Similar Questions

• My windows maximized all of a sudden and I need to know how to make them smaller?

  I read my email and all of a sudden my enlarged windows and fonts with them, that's happened once before and the maintence system I managed to fix the problem this time but his does not work?

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows XP, all of a sudden I'm more the administrator and I have no access to my files, programs or Task Manager.

  Home PC, computer laptop, Windows XP.

  All of a sudden, I start my machine, and I don't see my files or programs.

  The administrator is denying me access to the Task Manager and the registry.

  It is the same in Safe Mode.

  System Restore is also denyed by the administrator in safe mode

  Any ideas?

  The message indicates that the administrator has blocked this action...

  The administrator password does not work

  Reference Dell 620, XP, windows 2003

  I'm the only user.

  The same mistakes are present in safe mode.

  I've learned it's a virus.

  I took the camera for repair, where they recoveded my files.

  Repartitioned and reformat the hard disk.

  they are currently rebuilding it.

• Old catalog come all of a sudden upward, where is my current catalog disappeared?

  My old catalog came all of a sudden and I can't find my current, can someone help me find my most recent catalog?

  Use the file menu command-> open the recent item

• All of a sudden, my firefox is huge why?

  My firefox was fine, then all of a sudden last night I went ot open it and everything is huge, I goto facebook and facebook logo is half off, the police is huge and its annoying, how can I fix?

  
  

• Windows 7: all of a sudden, when I enter a search in Explorer 'field research' I get no results.

  Hello

  Suddenly and without installation or messing around with hidden options, if I get *.mp3 in the search box in Explorer on windows 7 64 bit with all the updates, I get no results.

  What happens in a directory with 4 subdirectories and 120 MP3s inside.

  If I use *. * I get no results.

  *.MP3 works in the start menu > programs or search files and gives a lot of results.

  

  

  

  Left me speechless. Any advice?

  OK, I know the ability of research in libraries of indexing operating normally.  So, the first thing to try would be to go in Indexing Options, then click on "search indexing and troubleshooting."  (Indexing Options in Control Panel, or you can search for it in the search box start (Orb) if it works.)

• Windows 7 all of a sudden not saving the connection properties

  I have a wireless network and several devices are connected to including a PC with Windows 7.  I've never had a problem connecting to my wireless network which is provided by a NETGEAR router, so far. Since a few days ago, Windows 7 has started to lose the property of "connect automatically" after that it recharges, and I think that it is losing the security key.  After a reboot, I have to enter the security key and be connected manually. My other devices are connect very well.

  

  I tried the following to resolve the problem.

  • Turned off the setting allow the computer to turn off this device to save power
  • Ran sfc/scannow to fix corrupt or missing system files, but they are beautiful.
  • Updated the driver software

  Any help you can provide is appreciated. Please provide the rationale for your suggestion (s).

  Thank you

  Hi Patrick,

  After the description of the question, I understand that after reboot the computer does not automatically connect to the wireless network.

  I would suggest trying the following troubleshooting steps and check if it helps.

  Method 1:

  I suggest you run the network troubleshooter to check if it helps. You can read the following article to make the resolution of network issues.

  Using the troubleshooter from network in Windows 7

  
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  
  

  You can check with the WLAN service is started and set to automatic, if the WLAN service is stopped, I suggest you to start the service and put it on automatic.

  Please follow the steps to start the WLAN service.

  (a) click Start, type services.msc
  (b) select autoconfiguration WLAN service in the list, right-click on properties
  (c) change the startup type to automatic
  (d) click the Start button
  (e), click on apply, Ok.
  (f) restart the computer and check if it works.

  Method 3:

  I suggest to delete the existing profile and read the profile and check if that helps.

  You can read the following article to create a network profile.

  Create or modify network profiles

  http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles

  Just reply to the State of the question and we will be happy to help you.

• Windows 7 all of a sudden, I have an invalid activation code

  Hello

  I have Windows 7 Home Premium, and now he asks me an activation key which, up to now (for the past 12 months), had been very well. Now when I turn on the computer it says that I have a valid version of Windows. I type in the key provided with the software (in the CD box) as provided by the store, and I get the message:
  "The product key you entered cannot be used to activate Windows on this computer".
  Now, I get a message saying that Microsoft Security Essentials will be disabled within 14 days. I also tried the activation of the phone that also does not work.
  In addition, I ran the windows application to validate and get "update installation failed. Information about the error 0 x 80070643
  I tried to update windows but get failures with the same error code as above.
  I ran the scan of Microsoft and AVG scanner and come clean. I uninstalled AVG before you repeat all the steps above. No difference.
  Clearly, this is a Windows error - please can anyone provide me with the correct software or the activation code as soon as POSSIBLE.
  Best regards, James

  I thought that you changed the product key, and I wanted to check.

  of your report:
  License status: Notification

  Reason for the notification: 0xC004F009 (grace period expired).
  
  
  You must activate by phone and speak to a representative of activation.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

  Alternatively, you can try here:

  https://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• Problems with windows update. all of a sudden the updates fail to install.

  I have XP media center edition 2002 sp3 version and I'm having problems with KB2621440, KB2647518 and KB2641653 updates all fail with the error 0x8007000d code. Last successful update was KB2660465 return 15 Feb.

  8007000D - Error_invalid_data.  Corruption in the folder C:\Windows\SoftwareDistribution.

  Rename the folder C:\Windows\SoftwareDistribution
  
  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Rename the folder "C:\Windows\SoftwareDistribution":
  a. Click Start, click Run, type %any and then click OK.
  b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
  c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  Restart and try windows update again. You will notice that your story will be available, but it's not important.

  If all goes well, you can delete the folder c:\Windows\SoftwareDistribution renamed after completion.

• laptop Vista HP Compaq Pressario 32 error 0 x 0 will not come all of a sudden

  I have 32 bit HP Compaq Pressario laptop running Vista; He's not coming!

  I tried to repair safe mode, 0 x 0 keeps,

  When I tried to run the System Restore, which goes back a month I got the 0x80070017C error code

  I tried to command prompt:check the disc.

  I ran diagnostic memory tool,

  I'm stuck, please help, a friend told me my laptop hard drive is probably damaged and need repair... help please...

  Hello

   
  1. what has been the result of safe mode, startup, repair, and check the disc?
  2. What is the full and exact error code that you get?
   
   
  Method 1 : run the last good known Configuration, if you have not done so earlier and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 
   
  Method 2: perform the steps in the article and check if the problem occurs.
  http://support.Microsoft.com/kb/934540 
   
  Hope that helps.

• I HAD A BUTTOM HOME NOW I HAVE NOT. NO SHARE AND ELSE. ALL OF A SUDDEN NOT LEFT / RIGHT BUTTONS WHY.

  I HAD A BUTTON AT HOME ON THE SIDE RIGHT NOW I DON'T HAVE AT ALL. NOW I HAVE TO GO TO THE TOP OF THE PAGE, CLICK ON THE YAHOO BUTTON, THEN MOVE THE SLIDER TO THE BOTTOM CAN REACH TO THE RIGHT, AND THEN CLICK NEW. ALSO MY LEFT & RIGHT ARROWS HAVE DISAPPEARED.

  Hi FARKLE111,

  If you have the Firefox menu at the top left, press Alt to temporarily show the menu bar. Go in view > toolbars and enable the bar of Navigation, the bookmarks bar and menu bar. This will give you a more familiar look for Firefox.

  You can also read the Knowledge Base article the Navigation buttons such as back, home, bookmarks and recharge are missing. There are lots of good information in there also.

  If this does not work, you can try the cor - el tips in this thread.

  Hope this helps!

• HP8600 all-in-one - scan all of a sudden won't scan in color to my mac os 10.5.8.

  How to remedy?  THX!

  Hello
  The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab scan tasks.
  4. Select the affected shortcut and click on change... (or double-click on the shortcut).
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop-down next to the Mode
  7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  Kind regards
  Shlomi

• Lightroom CC all of a sudden won't send files to Photoshop CC

  Out of nowhere hand, Lightroom lost the ability to send files to Photoshop. Keyboard shortcuts, do nothing and the commands on the menu are grayed out.

  I had the photoshop.plist file, but did not have a new after you restart Photoshop.

  So I uninstalled and reinstalled Photoshop. No improvement.

  So I put Lightroom updated to the latest version. Improvement of false weird.

  Now, if I open Lr I see the options send to ch not grayed out, but they do nothing. Even with the already open Ps, no file is going to Lr.

  It's not cool.

  What do I do?

  MacPro (end 2013) OS 10.10.2

  LR CC 2015 and now 2015.5

  PS CC 2015.1.2

  Sounds like the containing folder or disk permissions are not set for total reading & writing:

  Lightroom: Basic troubleshooting to solve problems more

• All of a sudden, I can't open a PNG file in layers.  I get a message file could not be found. Help!

  I work with multilayer files in photophop CS6 creating composite photograph.  All of a sudden, I can't open the PNG files.  I get a message that the file cannot be found when I try to open it.  Can someone help me please?

  A quick search on Google turned up the news I knew vaguely.

  PNGs in layers are only produced by Macromedia (later Adobe Fireworks more) using a proprietary format that has never been publicly documented.  Thus, it seems that only Adobe Fireworks can open the png with the layers intact. Whether or not you can export these layers in another file format and to open in another application with everything intact seems to be up in the air.

  Fire of artifice is not updated anymore and it seems that Adobe doesn't have a plan for png supports layers and the proprietary format is removed.

  Some people seek to affinity as a possible replacement for Photoshop.

  However to quote some comments from their FAQ:

  FAQ - fireworks in layers of PNG and TIFF files in layers

  Since this question comes up often, I write a definitive statement.

  Files PNG Fireworks (layers)

  There is no such thing as "layered PNG.  The standard PNG does not define a way to store diapers and only deals with flattened images.

  Fireworks saves the data of the extra layer of PNG files in a proprietary format with a private label. A definition for this exclusive data has never been made public.  Saved by Fireworks PNG still usable as a flattened image of any application able to handle PNG files.  These applications will maintain the standard data and ignore the proprietary data of fireworks.

  Affinity maintains the standard PNG files.  But it cannot import or export data from the layer by using the method of fireworks.

  There is no hope that we will always be able to manage the data layer from Fireworks PNG files.

  We recognize that being able to handle Fireworks PNG files would be very useful for users of affinity.  If a public definition of the format of data become available, we will be able to address the issue.

  Layered TIFF files

  There is no such thing as "layered TIFF.  The TIFF standard handles only images flattened under the tags described to the public.

  TIFF allows businesses to record any additional tags for their own use. Adobe has recorded two private TIFF tags that allow them to incorporate the layer data in a TIFF file.  These tags are an extension and are not part of the standard TIFF Central.  These tags are used to integrate data layer PSD into a TIFF image, in addition to the standard rasterized image.

  Since affinity has a PSD importer, we are able to import data from the layer of a TIFF file if it has these tags.  However, given that this is handled by our PSD importer that is subject to the restrictions as standard PSD Import in affinity.  We clearly that while we aim to provide the best third party support PSD, we can never replicate 100% the way Photoshop deals and displays a PSD file.  Photoshop has its own approach to apply the transparency/alpha, vector and features of vector, layer effects and gradient masks.  This means that although we can offer the importation of what can be changed to a PSD file, the result will not be a reproduction of a one pixel that you see in Photoshop.

  We recorded our own TIFF tags for the incorporation of the data layer of affinity in a TIFF file, in a similar way to the data layer PSD. This is intended for the dams that use TIFF as their Exchange format.  When you save a TIFF file, you are given the option to include data of layer affinity.  This will help keep the editable document of several layer elements.  This obviously comes at a cost of increased size.  Our TIFF labels will use our format proprietary data and as such, cannot be used by the applications of affinity.

  -----------------------------------------------------------------------------

  Their admission that same PSD are not guaranteed to be a reproduction of a tone pixel that you see in Photoshop, combined with the use of the affinity of the TIFF layers and tags "our TIFF labels will use our format proprietary data and as such, cannot be used by affinity applications." is a bit worrying consequences for everyone who has the hope that affinity would be a complete replacement for Photoshop

• Combo DVD - RW drive won't burn a disc

  All of a sudden yesterday after burning DVDs my DVD - RW combo drive won't burn a disc. I tried to run the Microsoft patch for CD DVD stuff and he said:

  the selected disk is not able to write, if you have multiple CD DVD players try to use another drive, otherwise you may need to install a CD DVD burner to burn with Nero, it says: this device needs a DVD R/W... and the fix format disc, it says the drive is not capable at all.  Also, when I go to the drive in my computer, it shows the drive as a CD drive.  I replaced the Combo drive with a new one and still have the same issues. Help!

  Hi Mkadv,

  ·         Have what Microsoft Fixit you tried?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

  Method 2: To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

   

  Method 3: The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641/

   

  Let us know if that helps.