Create multiple SSID - WLC - ISE 1.4 comments

Similar Questions

• About WLC "one-to-many" designates a LAN VIRTUAL mapped to multiple SSID possible?

  The Cisco Wireless LAN Controller Architecture includes this feature (possibility of configuration)?

  You can map multiple SSID to a VLAN, but you cannot map several VLANS on a SSID.

• Unique SSID from the multiple SSID

  Hello

  We seek to deploy wireless at five sites great campuses, one in each State.

  Does anyone have any ideas on the deployment unique verus multiple SSID SSID for each location.

  Are the benefits of filing a return and security to identify red devices associated with

  a unique SSID.

  The question was raised that it would be easier to configure one SSID to scan wireless

  devices that have separate SSID different places.

  Would appreciate any experience on this design

  Mate,

  Remember, when you're dealing with WLC, you do not configure the APs.  You configure the WLC and configs will be propatated of all APs manages the WLC.

  The WLC, you can use up to 18 SSID but you can configure 1 024.

  Currently, I have three SSIDS and one of them is for VoWLAN.

  Moreover, some hand scanners do not like the (hidden) SSID broadcasting.

• Why my photo album create multiple folders and duplicate my photos in folders?

  Why my photo album create multiple folders and duplicate my photos in folders?

  Can you give us more details about your problem? When this happens? It's an update of iOS for a newer version?

• How can I create multiple fronts for a single diagram?

  Hello

  I developed a VI with several controls and indicators that should run on computers with a screen from 800 x 600 to 1680 x 1050 resolutions. The problem I have is that the façade don't is not properly for this range of resolutions by checking the options in 'Properties of the VI' option. Is there a way to create multiple panels before in various sizes for my diagram and select the façade appropriate in accordance with the resolution of the screen programmatically?

  See the attached Zip file.

  I have two different facades.  Either one open and run it.  They call MainCode.vi that takes the references which is past and register for events.  From there on, he does all the work of the code that you would put in your façade .vi.

  In this way each façade can be arranged however you want for each screen resolution.

• How or can I create multiple new folders instead of doing one at a time?

  original title: create multiple new folders

  How or can I create multiple new folders instead of doing one at a time?

  The number of cases, where you want to create, and what you want to call them?

  You can create a group of folders by entering commands in a command prompt window.  For example, to create a folder for each day of the week in C:\Users\Public:

  CD /d c:\users\public
  for %d in (Mon, Mar, sea, game, Fri, sat, Sun) do mkdir %d
     Boulder computer Maven
  Most Microsoft Valuable Professional

• Need help creating Unique SSID and secure network

  My AP has been recently reset the SSID I had chosen has of course been erased and AP is now considered to be "linksys". It also now broadcasts as an open network.

  I tried to create a new network using the Intel PROSet/Wireless graphical user interface that came with my PC and it allows me to create a SSID and put a password on it, but it does not affect the real "linksys" network even if I would have erased "linksys" in the text box and enter my own.

  I tried in vain to reset the AP again and connect to 192.168.1.245 using IE and firefox, I get an error loading page every time. I have also tried to set the IP address of my PC to the same meanings and the subnet by default 255.255.etc and could not connect.

  I also tried to connect the AP to the pc directly, what does not work.

  What I am doing wrong.

  PS. I don't have the original installation CD, I think it would be solved.

  I managed. Thank you!

• Disseminate the Multiple SSID

  Hello

  I have an AP 1252 and I wanted to know what I need to do to set up to broadcast multiple SSID

  y at - it something I need to do on the web interface or something through CLI. Thanks in advance

  and have a great day.

  Please copy - paste the 'controllers to see the output. This will let us know if we can or we cannot broadcast multiple SSID.

  The command to enable this featute is...

  AP (config) #int dot11 0

  AP(Config-if) #mbssid

  SSID #dot11 AP (config)

  AP (ssid-config) #no - guest mode

  AP (config-ssid) #mbssid - guest mode

  SSID #dot11 AP (config)

  AP (ssid-config) #no - guest mode

  AP (config-ssid) #mbssid - guest mode

  This will do

  Concerning

  Surendra

• Multiple SSID on AIR-SAP702I-E-K9 (700 Aironet Access Point)?

  Hello community

  I wonder if it is possible to simultaneously run multiple SSID (actually 3) on a single Cisco AIR-SAP702I-E-K9, which is a standalone AccessPoint (AP). Each SSID should be linked to a different VIRTUAL LAN. Or do I need another model or even an AccessPoint driven by the controller to run multiple SSID on different VLANS to the same AP?

  Thanks in advance.

  Kind regards
  Adrian

  Hi Adrien,.

  Yes, you can have multiple ssid on the AP standalone. Each SSID must be mapped to a VLAN different.

  Kind regards

  Shubham

  Please do not forget to note positions that answered your question and mark as answer or was useful

• BVI Interface inaccessible since the addition of multiple SSID

  Announcement to the community for the first time.

  I have a simple HomeLAN which consists of a Cisco router for series 800-> switch PoE Cisco3560-> Cisco Aironet 1131AG Access Point.

  Everything works well for a while in which I had a simple port to "change the access mode" configured on the switch facing the AP and one SSID on the access point that is configured in stand-alone mode (without controller).

  My provider has enabled IPv6 on my broadband connection and I started to reconfigure my installation this afternoon to allow this.

  I decided to run only a bunk Dual LAN and a separate native IPv6 only test LAN for proof of concept.

  With this in mind, I changed the switch port to the access point to a "mode trunk switch' using simple dot1q encapsulation. I have also consulted the post helps very https://rscciew.wordpress.com/2014/05/24/multiple-ssid-configurations-on... after finding in this community post on the topic of multiple SSID https://supportforums.cisco.com/discussion/10899511/how-broadcast-2-ssid...

  I have now two SSID broadcasting (we will call double stack and ipv6 only for the sake of the argument). The SSID double stack uses VLAN 2 and 1 bridge, while the SSID only ipv6 uses 6 VLAN and bridge 6.

  I must stress at this point that my router (where I want to layer 3 for the two LANs gateways) I have DHCP, DHCPv6 and SLAAC configured on relevant VLANs.

  I seem to be the 2 VLAN trunking of properly and I can see the SSID broadcast in my house. I can connect to the SSID (authenticate and form an association as seen in 'show the dot11 association'), but I don't get an IPv4 address or IPv6 assigned to all clients (I tried Mac OS x, iOS, Android, and Windows phone). Furthermore, I can't ping the IP bvi1 of the AP - that is the element that is annoying me more that I must console to the AP to make any changes at all.

  Here is an overview of my AP configuration, with relevant parts removed for safety...

  dot11 syslog
  !
  dot11 said ipv6 only
  VLAN 6
  open authentication
  shared authentication
  authentication wpa key management
  MBSSID-guest mode
  WPA - psk ascii 7
  !
  dot11 said double stack
  VLAN 2
  open authentication
  shared authentication
  authentication wpa key management
  MBSSID-guest mode
  WPA - psk ascii 7

  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  the cipher mode vlan 6 encryption tkip aes - ccm
  !
  the ciphers of vlan 2 encryption tkip aes - ccm mode
  !
  has declared ipv6 only
  !
  such double stack
  !
  MBSSID
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface Dot11Radio0.2
  encapsulation dot1Q 2
  no ip route cache
  Bridge-Group 2
  the bridge-group subscriber-loop-control 2
  Bridge-Group 2 block-unknown-source
  No source of bridge-Group 2-learning
  No extinction unicast by bridge-Group 2
  Bridge-Group 2 covering-disabled people
  !
  interface Dot11Radio0.6
  encapsulation dot1Q 6
  no ip route cache
  Bridge-Group 6
  the bridge-group subscriber-loop-control 6
  Bridge-Group 6 block-unknown-source
  No source of bridge-Group 6-learning
  No bridge Group 6 unicast-flooding
  Bridge-Group 6 covering-disabled people
  !

  interface FastEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2
  no ip route cache
  Bridge-Group 2
  No source of bridge-Group 2-learning
  Bridge-Group 2 covering-disabled people
  !
  interface FastEthernet0.6
  encapsulation dot1Q 6
  no ip route cache
  Bridge-Group 6
  No source of bridge-Group 6-learning
  Bridge-Group 6 covering-disabled people

  Bridge IRB

  1 channel ip bridge

  interface control2
  MGMT AP Interface Description
  address 192.168.1.6 IP 255.255.255.0
  no ip route cache

  IP default-gateway 192.168.1.50

  As you can see I can not ping the gateway of AP - I would be very grateful if someone could point me in the right direction with regard to what I'm doing wrong here?

  Thank you

  Mick

  OK means your AP is to have IP vlan2:

  Do it like this and try again:

  !

  interface Dot11Radio0.2
  encapsulation dot1Q 2
  encapsulation dot1Q 2 native
  Group 1 bridge
  Bridge-Group 2
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2
  Group 1 bridge
  encapsulation dot1Q 2 native
  Bridge-Group 2

  !

  Or alternatively, you can delete the name native dot11radio0 and fa0.2. (It should also work without it), but be sure that for vlan 2 you have bridge Group 1.

  Concerning

  Remember messages useful rates

• Multiple SSID for AP in light mode

  Hello

  I tried to configure an AP that is light to have multiple SSID mode, as I do with autonomous AP but I couldn't, is it possible for an AP in light mode to have multiple SSID? If so, how can I do that?

  Thanks in advance for your help.

  supported wireless LANs is 512 and the AP you're just 16...

  http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52wlan.html

• Clock synchronization on WLC ISE and AD

  Hello

  I'm stuck in NTP, deployed WLC CWA using ISE which is integrated into AD. I tried to use AD as source NTP but no luck (universal fact that Cisco uses NTP while Microsoft uses SNTP).

  The question is, if the time is not synchronized between WLC, ISE and AD; redirect Web stopped work and no authentication takes place.

  I tried software installting Meinbergglobal NTP to distribute time to my Cisco devices. It works with Cisco devices, but it acts as master and does not synchronize its time with AD.

  I am trying to find a way to sync with Microsoft Cisco, is it possible in this world to do?

  Help, please...

  Thanks in advance

  DO NOT USE MS NTP/SNTP as a source of time is valid.  MS is the WORST method SNTP/NTP because MS does NOT conform to the NTP/SNTP standards.

• BPEL is create multiple instances of a single HTTP OSB call

  Hello

  Here, I describe how looks like my flow of integration.

  
  (1) proxy OSB service calls service BPEL (HTTP protocol for help)

  (2) BPEL called two services to OSB using HTTP calls (these two OSB services will insert the data into two tables)

  (3) according to my testcase an OSB service should be managed and second service OSB must fail, so any integration does not work as expected

  (4) but the second OSB service takes 2 minutes when inserting data into the database

  (5) in 2 minutes BPEL is creating an instance more

  How to stop creating multiple instances.

  Thank you and best regards,

  Harsha.

  Automatic recovery is enabled by default in bpel, you can try catch the fault. You can also change the value of MaxRecoverAttempt please go through this link: https://svgonugu.wordpress.com/2013/05/08/auto-recovery-feature-in-bpel/

  Kind regards

  Anshul

• Is there a way to create multiple BQY output to one of the Job file?

  Hello

  I use the EPM11.1.2.3.501 version.

  BQY report because of the large amount of data, it is difficult to use WebClient.

  Then share on a quarterly basis.

  However,.

  If change is to occur, there are difficulties must edit each file.

  For example,.

  Save the task BQY for 4th quarter 2014, 2014 3 q, 2nd quarter of 2014, 2014-1 q.

  When you run the task, the output of the work file is created.

  If the work file is changed, you must change all four files.

  This will not be growing creations.

  Is there a way to create multiple BQY output to one of the Job file?

  Please help me.

  Thank you

  It is not possible to have several BQY out in a work file.

  Thank you

  KK

• Click and drag the shape tool creates multiple instances (w / photos)

  When I click on and drag a shape tool, illustartor creates multiple instances of the object, such as a card when you earn solitare.

  No idea what could cause this?

  

  

  Is your tilde ~ key down, or you have any plug ins installed that may be corrupt you system?