Create odbc connection between local access and remote access or sql remote

Similar Questions

• How Exchange View screen between local files and remote server?

  I just need to know how to switch the display between local files and remote server, I want my files the on the left and the remote server on the right.  I had it set up before, but just got a new computer and can not remember how I did it.

  Its OK, I found it. Thank you

• ODBC connection between oracle db and db US7ASCII mysql UTF8

  We are trying to convert our Oracle US7ASCII databases to Unicode (AL32UTF8). We have Connector/ODBC 5.3.4 for Solaris (mysql-connector-odbc-commercial-5.3.4-solaris11-sparc-64bit). Everything works when the two databases are US7ASCII. We have used MISP to convert the Oracle in AL32UTF8 database, changed nothing else, and the connection stops working.

  /usr/local/etc/ODBC.ini table of contents:

  [Default]

  Driver = /usr/local/myodbc/lib/libmyodbc5.so

  Description = MySQL ODBC Driver

  SERVER = alex

  PORT = 3312

  USER = schzoneoffice

  Password =

  Database = SCHZONE

  OPTION = 3

  SOCKET =

  $ORACLE_HOME/hs/admin/initmysql.ora table of contents:

  
  

  #

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = mysql

  HS_FDS_TRACE_LEVEL = we

  HS_FDS_TRACE_FILE = mysql.log

  HS_FDS_SHAREABLE_NAME = /usr/local/lib/libodbc.so

  #

  # ODBC specific environment variables

  #

  Set ODBCINI=/usr/local/etc/odbc.ini

  Can someone suggest the parameters we can try to get this working? I tried to play with the settings HS_LANGUAGE and HS_NLS_NCHAR my initmysql.ora file, under $ORACLE_HOME/hs/admin, nothing helps.

  Right after that I posted this, I answered my own question:

  I was an invalid test, while playing with the parameter HS_LANGUAGE the other day. (lsnrctl reload does not work properly - need to stop and start the receiver, also disconnect and reconnect your oracle session, given that the mysql connection is persistent)

  Today, I added HS_LANGUAGE = american_america. US7ASCII to my initmysql.ora file and it works.

• My connection between my PC and the Internet.

  MY CONNECTION BETWEEN MY PC AND THE INTERNET.

  I sent a message yesterday - don't know if I got a response.

  My question is that something is wrong with my internet connection.  He died in line every 4-10 minutes of use.  I bought a new computer because my technician told me that I had a bad virus on my PC.  But now I have a new PC but my problem remains.

  Can what tests I do to see if the problem is with my wireless router, the Arris modem provided by Comcast, or something else.

  Please help me.

  Dave Fox

  my main email is , but I think I have the address of e-mail as .  so when you meet me you you the man or the other.

  But please reply to this email.

  You have the same problem if you connect directly to your router?

• Connection between the computer and the external hard drive stopped during the backup

  The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.

  Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.

  Reference: back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It will be useful.

  Let us know the status, we are happy to help you further.

• test connectivity between the FI and SAN

  Hello

  could I do fc fabric interconnect working in changing CF ping and if I could tell me please how?

  and if I couldn't how can I check the connectivity between the FI and Netapp storage

  Thank you

  Make sure that you have enabled the FC zoning to the VSAN profile.

  Ahmed

• Unable to connect to the internet, WLAN will only connect to "local access" and does not recognize my home group / network

  I bought a new router and configured the router by using the LAN connection.  now want to connect via a WLAN and cannot.  It connects to the router, but not through the gateway.  all other computers connect very well.

  Connection info says Uniidentified network

  Solved the problem by returning to the bottom of the network security to WEP

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• How can I navigate another feature of a local html and remote html url and transmit data or the key, value pair?

  Hello

  I'm trying to integrate a local html file and a remote url base html file MAF 2.0.1 based app. I want to access another device (based amx) on click of a button on the html pages. How can I achieve the same?

  Already tried with the below which fails with call javascript directly on the page html itself.

  -HTML-

  <! DOCTYPE html >

  < html >

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = windows-1252 "/ >"

  Home < title > < /title >

  < script type = "text/javascript" >

  document.addEventListener ("deviceready", callfeature, false);

  function callfeature() {}

  Alert ("callfeature called to map");

  adf.mf.api.gotoFeature ("sni.gps.demo.locationFeature", function (req, res) {})

  Alert ("full gotoFeature");

  },

  function (req, res) {}

  Alert ("gotoFeature failed with" + adf.mf.util.stringify (res));

  });

  Alert ("callfeature called to map closed");

  }

  < /script >

  < / head >

  < body >

  Simple mobile Web Page < h1 > < / h1 > < form method = "get" >

  < input id = "ip1" name = "name" / >

  <!-a href = "mycustomurlscheme://somedata" id = "myurl" > map < / a->

  < button type = "button" id = 'mybtn' name = "gpsbtn" onclick = "callfeature ()" >

  go to the feature

  < / button >

  < / make >

  < / body >

  < / html >

  Hello

  update to 2.1 MAF gives you , that can be added to HTML files the and remote access to the MAF since JavaScript API. Deepak mentioned "adf.mf.api.gotoFeature" and I can confirm it works HTML distance (and so it should be using local HTML). For the transmission of data, not sure whether the request URL object it. I would try here EL referencing a managed bean of application-scope defined in the scope of application (?). I tried beans controlled but so far has not tried to access the managed beans to a feature local or remote HTML using EL (although the EL is here)

  Frank

• RoboHelp5: Connection between the project and subproject

  I have a master project and four sub-projects that all reside in a flat directory; in other words, the main project folder and all subproject files are at the same directory level. Can I combine the projects very well, but when I try to add a hyperlink to a topic in the main project of a subject in one of the subprojects, the link disappears when I compile the main project.
  
  I searched for the answer adobe and found a page describing the 'link between merged WebHelp projects', but the instructions say to put the files from subproject in the main project directory. I keep a set of available test only projects for practical things on without breaking my work today and tried it. I could not create merged using this method in all projects the. The link of the merged project appears in the table of contents, but when I met the main project and seen the results. merged projects appeared.
  
  Any ideas on how I can combine projects * and * create hyperlinks between the master and subprojects? Thank you.

  Ok. It worked, and I didn't have to change the structure of Active Directory or create a master project that is devoid of content. Basically, my project composed of five projects... a master project and four projects that are merged into the hand. All project files are on the same level of directory.

  The key to creating a hyperlink between a subject in a project and a topic in another project is in the table of contents:

  Type the text in the topic you want to turn it into a link
  Derivative of this text
  By clicking on the hyperlink icon in the toolbar
  Next to the link, click on the arrow down and select Remote topic in the menu
  Navigate to the project's CHM file you want and double click it.
  If you get a notification dialog box indicating that the files of theme with spaces may cause remote subject links do not work, click OK (in the future, I will have to create the topic filenames without spaces)
  In the select a remote topic dialog box, select the name of the topic you want to link to, click OK and click OK again.

  I know this is fairly elementary to most of you, but I thought that document my steps might help someone like me who is facing the same situation.

  Thanks again.

  -Travel

• Connection between the laptop and desktop computer

  Hi I have a Tecra 8000 Windows xp pro, is it possible that I can connect the mobile to my PC, which runs on windows xp family, that is the reason for the transfer of material, from one to the other, is there a likely with different windows problem! I have a dvd drive on the laptop, but not on the PC! someone help please.
  cordially aga151

  You need a crossover cable. This cable is designed for a direct connection between two units. The cable is cheap and you can find it in every store in PC.

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.

• It is possible to create an interface between the host and the VM

  It is possible to create a virtual switch between esxi host and a virtual machine.  I know that technically I can get to the esxi host for the virtual machine in the virtual machine network and back into the host esxi during the port of the kernel.  But we wonder if it is possible to have a private network setup so that the VM guest can talk directly to the shell host secure without leaving the network?

  Yes you can - create a virtual with a vmkernel port and a port of the VM of the group as long as they are on the same segment that traffic will not leave the ESX host

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Connection between the monitor and the Studio 1458 laptop seems broken

  After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

  I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

  Any ideas on how should I proceed?

  Thank you

  Johannes

  This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

• The connection between your access point, router or cable modem and the Internet is broken...

  -router

  connection internet dropmy every 20 minutes and again after one minute everything is as before... pls help has me... mb my router is a waste

  Wire? Wireless? Status of other computers (if any)? Router? Network devices? Type of Internet connection?

  Have you other computers can connect to the Internet using the same network hardware?

  You have any kind of 3rd party Network Manager installed, like Hello, Netmagic and the likes?

  Do you have the "Fancy" 3rd part security suits, or as the hybrid of nVidia Firewall Firewall.

  You are using more than one firewall (including native Windows), AV or other security applications active?

  If you use any 3rd part above, try to configure them to work corretly on your network, or get rid of them and see if it helps (RID, means getting rid, not just disable ).

  ------------------

  Assuming that you are connected with the wireless to the router.

  First scan the computer against the viruses and Malwares.

  When you are sure that it is clean.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET