Create the accounting working for a long time program

Similar Questions

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.

• EditingUtils.js has worked for a long time

  In a recent thread I inquire how to bind to a specific Spry Panel on another page. I got a very helpful answer with a link to a tutorial that describes the need to download the latest version of Spry and copy SpryURLUtils.js to site SpryAssests folder. The link works fine, but when I want to open these pages in DW and work on them, I have a LONG period of spinning Rainbow ball followed by this message:
  
  "A script in the file MyDisk:Applications:Adobe Dreamweaver CS3:Configuration:Shared:Spry:DesignTime:EditingUtils.js worked for a long time. Do you want to continue? »
  
  Click 'Yes' or 'No' to display the dialog at least once more until the page is accessible in the interface of DW. I don't know if I have a current version compatibility thing or what. Everyone knows this?
  
  JAY

  I found my own answer in this tech note of.

  Not hard to fix. Just that I have little hack.

• The black areas of the image appear curiously in the file opened for a long time

  There's probably a simple explanation, but if I have a file open in Photoshop for a long time blacks will start appearing saturated/blocked upward. If I close and reopen the file, it looks normal again.

  Anyone know what causes this and how to prevent it?

  I use OS X Lion, Photoshop 5, Apple Cinema display 30 ''. My monitor is calibrated by X-Rite i1 display and resets according to amibent light.

  Thank you.

  Try to disable the ambient light of the i1 function and see if that helps.

• A Script in the UNKNOWN file worked for a long time. Do you want to continue?

  Of course I do, but I can't. I click 'No' and Dreamweaver hangs. I click 'Yes' and Dreamweaver hangs.

  • Windows 7-64 bit
  • Generation of Dreamweaver 2014-6733
  • See attached serigraphs of the awesomeness of editing files .cfm with Dreamweaver on my computer.
  • I can open HTML files with no problems and most .cfm. I can't open some .cfm files.

  So I pinned it down to this excerpt:

  Dropbox - problem_script.php

  Most of the changes to the file at this point will allow dreamweaver to open it, but not in the above report. What is interesting is that simply by changing setting indented or a variable name has helped with dreamweaver open the file... Now, in the file original with many functions, changing the indentations large PHP no longer works. Remove this part the large file fixed my problem:

  Stampin' = $("#entryCheckinDate") .datepicker ("getDate") .getTime () / 1000;

  EDIT: actually, it turns out that all I had to do was replace the above line with:

  Stampin' = $("#entryCheckinDate") ["datepicker"]("getDate").getTime () / 1000;

  Now it works

• Problems with outgoing mail / STMP server after has worked for a LONG time...

  Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."

  Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »

  I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.

  I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?

  Or should I contact Primus technical support and try to sort it out with them?

  Thanks a lot for listening.

  Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.

• Startup Repair has worked for a long time, saying: 'attempt to repair' can I stop him?

  Ran the Vista system, the installed files recovery, asked to connect, file froze, closed system, says no hard drive found.  Set recovery disc has chosen once again, startup repair and it worked for about an hour without any action.

  Check:

  http://www.Vistax64.com/crashes-debugging/289617-Startup-Repair-cant-cancelled-still-running.html

• Help - my p6142p stopped at the HP logo for a long time...

  Has started last night, my HP p6142p landed on the screen of the HP logo for about 15 minutes before he proceeded to the Nvidia Raid control and continuation to Windows7.

  There is no hardware / software changed.

  I had disabled the HP logo screen once I'm in the Bios setting and reloaded the default bios setting but the same result.  He detected cpu, ram, hd and usb then deadlock (10-15 minutes), before continuing.

  Anyone have this problem?

  Wasabi

  I thought of it and the cause was my Espon all-in-one, for some reason, the reader on the printer did not cause the USB mass storage device error in card device manager.

  I had not plugged and and reset my printer and my pc boot normally again.

  Big_Dave, thanks for the quick response.

• How to create the shared library for linux real-time target in labVIEW Windows?

  I use myRIO running linux in real time. In my project, I need to pack some C code, so I tried the node library function call.

  I know that I should use the tools compile cross - compile linux on Eclipse to compile c code in linux .so library. But the problem is that call library function node does not recognize the .so file because my labVIEW runs on a Windows PC.

  What should I do to fix and how to combine C code with labVIEW during programming for devices shipped as myRIO?

  Basically, you must also create a Windows DLL that exports the same functions. These functions can be empty stubs if you do not want to run the code correctly on Windows, otherwise you will need to consider how to implement the equivalent functionality on the Windows API.

  Then you can write in your node library call as the name of the library ". "*" and the name of the shared library Windows ".dll" while the Linux version is called "name of your library > .so". LabVIEW will replace the * after the comma in the name of library with everything that is the preferred extension shared library for the platform it is running on and therefore load the right shared library.

  Alternatively you can wrap call all the nodes of the library in a structure that contains the node library in the case of Linux RT and all what you want to run on other platforms in the case of default or a case of specific platform, call the conditional compilation.

• Why using Mozilla to enter a web site is my password rejected when he worked for a long time. PASSWORD is corerect

  Years my password work when you use MOZILLA by accessing the web site XPRESSBET. Now
  my password is rejected, but it works with other browsers such as Google Chrome or Internet Explorer.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• DisplayPort has worked for a long time, stopped after docking

  Hey community,.

  So I have this work computer, a fine T510. I connect it to a big Dell monitor, high resolution (home now, do not have the model). The monitor is 2560 x 1600, and I connect via displayport. Dual link DVI is apparently going very high.

  Everything was dandy until today. Today, I decided that hanging a mess of pacifier all day cable, so I'm a (new) docking station and put together. Cable DisplayPort, as for everything else, connected to the docking station.

  It was fine for 15 minutes. Then, after idling, I guess the monitor went to sleep, and now he wakes.

  I tried all the standard things. The two ports, displayport on the docking station, the port on the computer with the computer turned off the dock, update driver, several reboots, Fn F7. Nothing works.

  I also tried a DVI cable. That works very well, and I would stop here if not for the loss of resolution.

  Win 7 64-bit, up to date. Help?

  
  

• Toshiba Satellite M60-154: what is the best way for a long service life of a battery?

  Hello Toshiba-users,

  I bought the "Toshiba Satellite M60-154" but I want to use most of the time on the AC adapter.

  I read the manual, but they say nothing about the battery life for people like me who will use the computer power adapter laptop most of the time.

  I would like to know if:

  (1) it is best put the battery inside when I use the laptop on the power adapter for a long time (they say this is not good for the life of the battery when it is fully charged and when he is still in charge...)

  (2) it is best to take the battery when when I use the laptop on the power adapter for a long time and check the battery every week for example to see whether or not it is still loaded (they say it's good for the life of the battery when the battery is fresh off once a week)

  Indeed, what should I do to make sure that the battery will have a long life, knowing that I always use the laptop on the power adapter instead.

  Thanks for the tips

  [Edited by: admin on 28-Sep-05 17:28]

  Hello

  your info is just. Only put the battery in the laptop, if you want to load or work without mains, to make sure that your battery has a long service life relative.

  Good bye

• blocking connection for a long time

  Hi Hussein.
  
  EBS 11.5.10.2
  AIX 5L OPERATING SYSTEM
  
  I don't know what that happens to our instance of prod now :(
  I connect to the URL of windows and EBS login page displayed. But when I enter the name of USER and password
  e.g. SYSADMIN / sysadmin.. .the connection suspended for a long time. Where can I find the log to check ang troubleshoot it?
  
  
  Thank you very much

  Hello

  I'm really confused now, I don't know which caused the system to hang. In fact, I met before.
  This all started when I installed a 2nd instance.

  Please check that apache log file and the database log file.

  But I noticed that the PROD instance was affected, it crashes often now, I don't know if it has been affected by the
  adding group 'dba' which is not his group.

  The second installation should not affect the instacne which is already running.

  My question is, is it OK to run rapidwiz two times? to create the instance of PROD and DEV instance? instead of cloning.

  Yes, it is possible, but the two instances will not the same.

  Kind regards
  Hussein

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox