Similar Questions

• Cannot create the text

  This is my first shot using Photoshop and after downloading PS6 on my computer at home and the laptop yesterday evening thanks to a subscription of Adobes, I immediately ran a question about the two systems running windows 7.  Question: I am unable to create any kind of visible text or get the lines or the slider that show as I type.  I messed up with the police (which makes greater/smaller) and my text color is different from my background and still no luck.  Once I type something however and start a new layer then I see my text appear in the window of the layers on the previous layer.  Any suggestions on how to solve this problem would be appreciated.  I apologize if this question has already been requested and we responded and I missed it.  Thanks in advance.

  Try the following steps:

  

  Open 'Preferences of Performance' as shown above. Under Windows, this parameter will be available under the tab 'change '.

  

  See the 2 boxes highlighted on the screenshot above. Check if the option "use graphics processor" is selected. If this is the case, click on '1' advanced settings.

  

  Choose "Basic", as shown in the screenshot.

  Click OK and try to create the text.

  If it still does not work, go back to the 2nd screenshot, disable the 'Use graphics processor' option by unchecking the checkbox (2), as shown in the screenshot and see if that fixes it.

• Is it possible to create the text block with non-uniform formatting is applied to the text?

  Hi all

  By this script

  var doc = app.documents.add(70, 20, 300, "Test", NewDocumentMode.RGB);
  var textLayer = doc.artLayers.add();
  textLayer.name = "Text";
  textLayer.kind = LayerKind.TEXT;
  
  var solidColorRef = new SolidColor();
  solidColorRef.rgb.red = 0;
  solidColorRef.rgb.green = 174;
  solidColorRef.rgb.blue = 239;
  
  var ti = textLayer.textItem;
  with (ti) {
       contents = "Blah-blah-blah!";
       kind = TextType.PARAGRAPHTEXT;
       height = new UnitValue("20 mm");
       width = new UnitValue("70 mm");
       position = [ new UnitValue("0 mm"), new UnitValue("0 mm") ];
       font = "MinionPro-Bold";
       size = new UnitValue("24 pt");
       color = solidColorRef;
       justification = Justification.CENTER;
  }
  

  So I can create a block of text with uniform like formatting

  
  But, as far as I understand it, it is impossible to make an image and apply different sizes, colors, etc. (Please confirm or refute it).

  To achieve the result by script as follows:

  

  The r to Browse datashows the formatting only to the beginning of this text.

  
  What I want to achieve is to take a block of text in the InDesign document and re-create it in psd-file. (The text must be editable)

  Y at - it another way to achieve this: by plug-ins, extensions, incantation, etc.?

  Kind regards
  Kasyan

  So that other things I noticed, it's text.jsx does not work with UnitValues. It uses the action Manager to work with textRanges. And it seems that Adobe changed the textItem units operating. Therefore, it is difficult to understand what values to use. Text.addNewTextLayer () and Text.modifyTextLayer () seem to what different values for the text of the same size.

  So below is an example updated the PS-Scripts-post on how to create a text layer with different textRanges using the current text.jsx.Note I've hard-coded sizes for that to work as I had hoped.

  function tsrDemo(doc) {
       var doc = app.documents.add(new UnitValue(70,'mm'), new UnitValue(20,'mm'), 300, "Test", NewDocumentMode.RGB);
       // we want to create a new text layer so create a new TextOptions with the contents as the argument
        var opts = new TextOptions("Blah-blah-blah!");
         // override the default settings
         opts.layerName = "Test";
         opts.kind = TextType.PARAGRAPHTEXT;
         opts.height = 800;// pixels
         opts.width = 200;
         opts.position = [ 0, 0 ];// pixels
         opts.justification = Justification.CENTER;
         opts.font = Text.findFont("Minion Pro Bold");
         opts.size = 6;// not sure what unit this needs
         opts.color = Text.toRGBColor(0, 174, 239);
  
         // create a new text layer with those options
       var layer = Text.addNewTextLayer(doc, opts);
  
         var opts = new TextOptions( layer.textItem);
         opts.contents = layer.textItem.contents;
         // now need to construct TextStyles for each range we want to set
         // for ranges we can only change the font, size, and color
         // first set a textStyle that matches the TextOptions
        var s1 = new TextStyle(undefined,undefined,undefined);
         // now set a textStyle for each different style you want
        var s2 = new TextStyle(undefined, 12, Text.toRGBColor(0, 0,0));// for some reason size values here are not the same scale as above
         // define more TextStyles as needed. here we only need one
  
        // Now create the set of ranges to apply the styles over
        var ranges = new TextStyleRanges();
         // the first range must start at 0.  In this example we want the first range unchanged
         // so we use the TextStyle that matches the TextOptions
         // this range covers the entire contents
        ranges.add(new TextStyleRange(0, opts.contents.length, s1));
         // this range covers the middle 'blah'
         ranges.add(new TextStyleRange(5, 9, s2));
          // we now add the ranges we set to the TextOptions
        opts.ranges = ranges;
  
         Text.modifyTextLayer(doc, opts, doc.activeLayer); 
  
      };
  
      tsrDemo();
  

• Can someone tell me how I would create the text in this way?

  

  I'm tempted to create a logo for a softball team, the cyclones. It would be a very good start and I would like to try this word processor. I have no idea how this effect was done. I found that using a google image search and while I have no intention to copy it, I would like to integrate the text effect.

  First of all, a necessary 'disclaimer' so I can sleep at night:

  All the features that allow you to do such things to the text should automatically invoke an alert dialog that reads:

  "WARNING: just because you can, does not necessarily mean, you should."

  Designs involving gross distortions of the text must be done by people with a sense of definition of type and path editing skills to do things. I would no sooner try to get to a customer the raw results of these characteristics of distortion auto-moment-eye-candy as good publicity 'logo' that I would try to go to my boss cold spaghetti-Os straight-out-of-the-can as a "fine Italian dinner."

  I prefer to see beer cans on the side of the road as the applications more fans of distortions text cheezy on signs, letterhead, brochures, web pages, Al - and I despise very rubbish.

  Very well. Guilt for what follows has lessened, attracting such a thing can easily make much more controllable with a small geometrical construction to use as guides and a simple envelope than futzing around with-it-for-me of the features like the fluidity tools say. We consider that SmartGuides is activated for reasonably reliable snaps:

  

  

  

  ZZZZZZ... ZZZZZZ...

  JET

• Failed to create the text box

  me and my friend has created a Web site, him with the help of adobe photoshop with a .psd file, then he has compiled all that and sent me to do in dreamweaver.
  
  the problem is that I can't put any text on it, because the images of ruin.
  
  I'm not very good in dreamweaver. I tried to put a top coat and seems to work, but when I look in firefox all the text is on the left, I tried to line up, but is still not where I want to.
  
  is there anyway that I can put the text on the images wherever I want without ruining the design?
  
  images are placed using a table simple code
  
  
  www.3X.tehcheese.com/test is the document

  Hello
  I did some work for you. On the page. Please follow the link
  http://www.Digimax.org/test/3xtreme.html

  That's what I did. Used your webpage, saved as a pdf file, saved the pdf file in png format and cropped it, which serves as the background image.
  Sliced your links - home... About us and so on... and in sub format of graphic links in a

  . Graphic links are in png format. Ideally, they should be gif or jpeg format.
  Put in a text of demonstration. It is not formatted and has no style with it. Just to show that the text can be set.
  In the any

  Tags that you can put in the items table, and that should work for you.

  Please save the webpage http://www.digimax.org/test/3xtreme.html
  and all the files, including background, slices etc will be saved as well. Look at the code and it will start how to navigate.
  I hope this helps.

• I bought Adobe Acrobat DC with the understanding that I could create a form with a text field that a customer could enter then several sentences, paragraph or several pages.  Working with the 'prepare form', I can create the text box, but it does not give

  http://www.gehendowment.org/

  Since the Web site please see Application to view the pdf file and scroll down to page 2 to see the text answer box and you can enter multiple lines of text.  That's what I need, so what's the correct software that goes to me.

  Ah ok. Just in case where it is not clear

  * Acrobat can't do MultiPage forms

  * Designer can do more powerful forms

  * Designer is now sold separately.

  Also be aware that the Forms Designer only show in Adobe software and others and cannot be used on portable devices more and most browsers.

• Font size unstable when you create the text layer in batch processing

  Hello

  Using photoshop CS6 on Mac, I see a problem with one of my batch sript which is only task is to apply a water embossed mark to the images that I've resized so that the longest side is always 500px. (varies depending on how I've cropped short side).

  In most cases, the text element, I add to the image seems to be in good condition. But then no reason apparent, it will suddenly apply the text (that I put to 24pt) and it means big. To solve the problem, I have to reduce the size of police (via shares pallate) down to 8 pt. Then he begins to appear more or less correctly (for a while) up to maybe a few weeks later, when I open photoshop to run the task again and suddenly pt 8 fonts is FAR too small and I have to bump up to 24pt again.

  I don't know what I could do to cause this problem. I never waste time with processing another batch and then to resolve this issue when it occurs.

  Thank you

  If this is the cause of the problem, a step in the Action that changes the resolution of 300ppi ("with resampling"unchecked) could help.

• Create the text block and flow of

  Dear friends,

  I need your help "very urgent."

  How excess content stream of framework (table) text for the next block of text? The following image must be created.

  Front

  

  I need after-

  

  Please suggest friends

  Thanks in advance

  KS

  If you select a textframe, you already have a textframe. So, if you choose app.selection [0] .textFrames [0], this means an anchored within a textframe textframe.

  And: You try to create your textframe on page 1. But you must add the new textframe on the page following the page of your choice.

  So, try this one:

  var curDoc = app.activeDocument;
  var frame1 = app.selection[0];
  var parPage = frame1.parentPage.documentOffset;
  var frame2 = curDoc.pages[parPage+1].textFrames.add({geometricBounds: [50, 50, 100,100]});
  frame2.previousTextFrame = frame1;
  

• How to create the text field to work with mathematical applications in Muse?

  How can I create text fields to work with the Muse?

  Example:

  A + B / 20 = C

  What to do with the Muse?

  Even more... I could put it on a mobile app with Muse?

  Hello

  Unfortunately not. But what you can try is to use a certain type of Javascript on your page to Muse and achieve this goal

  A code example can be seen here, example Code snippets | Qualtrics

  Output: online survey software | Survey of Qualtrics Solutions

  Hope this helps

• How to create the text field?

  I can create symbols on the stage by using the command "sym.createChildSymbol".

  But how can I cretare textFields with script?

  concerning

  Hello

  Well, you can create a text symbol (best solution).

  You can also use jQuery, but you must rewrite properties panel: police, position, width, height...

  One case:

  $('

  a new paragraph

  ')

  .appendTo ("#Stage")

  . CSS ({'position': 'absolute', 'top': '40px', 'left': '40px', 'color': 'blue'});

  You can use other tags:

  ,

  ... See html5 tags.

  With the help of classes.

  $('

  a new paragraph

  ')

  .appendTo ("#Stage")

  . CSS ({'position': 'absolute', 'top': '40px', 'left': '40px'});

  SYM. $(".redText") .css ({'color': 'red', 'background-color': "#EEEEEE"});

  I want to hide this paragraph.

  $("#textField").hide ();

  or

  var myParagraph = $("#textField");

  myParagraph.hide ();

  later:

  myParagraph.css('color','black').show ();

  and so on...

• Use bridge to create the text layer that contains special characters

  Hi, guys.

  I want to create a psd using bridge. but failed. Can someone help me?

  Here is my script:

  script2 = "var docWidth = 1650;';"

  script2 += 'var docHeight = 1650;';

  script2 += "var docName = 'Before';';"

  script2 +=' docRef var = app.documents.add (docWidth, docHeight, 300, docName); " ;

  script2 += "var myLayer1 = docRef.artLayers.add ();"; "

  script2 += "myLayer1.kind = LayerKind.TEXT; « ;

  script2 += "myLayer1.textItem.kind = TextType.POINTTEXT; « ;

  script2 += "myLayer1.textItem.font = 'News702 BT'; « ;

  script2 += 'myLayer1.textItem.size = 13;';

  script2 += "var textColor1 = new SolidColor;";

  script2 += "textColor1.rgb.hexValue ="F8F3E9"; « ;

  script2 += "myLayer1.textItem.color = textColor1; « ;

  script2 += "myLayer1.textItem.contents ="abcd\"abd\"ed\ "afa\" ";" « ;

  var bt = new BridgeTalk();

  BT. Target = "photoshop."

  BT. Body = script2;

  BT. Send();

  the problem is the content of text contains "or". ""

  You have some problems with your script, you give the values for the width and height for the new document, and they will default the ruler settings you have in Photoshop, this cannot be pixels.

  The name of the font should be the postScript name and that they contain no spaces.

  It is best to pass a string encoded in the script and then decode it in Photoshop: -.

  var text = encodeURI('abcd\'abd\'ed\"afa');
  var bt = new BridgeTalk();
  bt.target = "photoshop";
  bt.body = bt.body = "var main = " + script.toSource() + "; main(" + text.toSource() + ");";
  bt.send(4);
  
  function script(text){
  var docWidth = 1650;
  var docHeight = 1650;
  var docName ='Front';
  var docRef = app.documents.add(new UnitValue(docWidth,'px'),new UnitValue(docHeight,'px'), 300,docName);
  var myLayer1 = docRef.artLayers.add();
  myLayer1.kind = LayerKind.TEXT;
  myLayer1.textItem.kind = TextType.POINTTEXT;
  myLayer1.textItem.font='Georgia';
  myLayer1.textItem.size=13;
  var textColor1 = new SolidColor;
  textColor1.rgb.hexValue = 'F8F3E9';
  myLayer1.textItem.color = textColor1;
  myLayer1.textItem.contents =decodeURI(text);
  }
  

• How to create the text field that accepts (only Alphabates no numbers or numbers)

  Hey guys,.

  I just want to know how to create a text field that accepts (only text without characters or numbers)?

  I want to insert validation that field only accepts the alphabates no number or numbers are allowed!

  
  Thanks in advance!

  In the designer, click the field that you need to validate and open the script window, together the menu show drop-down list to validate in the drop-down list and place the code in the script window. Make sure that the language is Javascript and run is defined on the Client. If you don't see the script window goto window-> Script Editor Menu item.

• How to create the text entry?

  I created a table of text input fields class (TextBox) custom.  When the user types something into a text box, I want to compare the expected response (responses: Array).  I can't get the keyPressed function to read the input text.  When I trace box [boxnum] .text, it says "undefined".  What I am doing wrong and how I can fix it?

  
  var box: Array = new Array (6);
  responses of the var: Array = ['-36', '-36', '216', ' / 9 "," / 9 "," 24 "];
  var boxNum:int = 0;

  Sandbox (null);

  function setBox(event:Event):void {}
  box [boxNum] = new TextBox;
  addChild (box [boxNum]);

  box [boxNum] .x = 100; box [boxNum] there = 100 +(30*boxNum);
  Box [boxNum] .addEventListener (KeyboardEvent.KEY_DOWN, keypressed);
  }

  function keyPressed(event:KeyboardEvent):void {}
  Reply.Text = "";
  if(Event.keycode == Keyboard.Enter) {}
  var myText:String = box [boxNum] .text;
  trace (Box [boxNum]. (Text);
  If (myText is {answers [boxNum])}
  Reply.Text = 'It.';
  boxNum ++;
  Sandbox (null);
  } else {}
  Reply.Text = "try again.";
  }
  }
  }

  This is why your code does not work.  your TextBox instances are movieclips and movieclips have no text properties.

  If you assign the textfield object that is a child of TextBox and instance name, you can reference the textfield object using the dot notation:

  var box: Array = new Array (6);

  responses of the var: Array = ['-36', '-36', '216', ' / 9 "," / 9 "," 24 "];

  var boxNum:int = 0;

  Sandbox (null);

  function setBox(event:Event):void {}
  box [boxNum] = new TextBox();
  addChild (box [boxNum]);

  box [boxNum] .x = 100;

  box [boxNum] there = 100 +(30*boxNum);
  Box [boxNum] .addEventListener (KeyboardEvent.KEY_DOWN, keypressed);
  }

  function keyPressed(event:KeyboardEvent):void {}
  Reply.Text = "";
  if(Event.keycode == Keyboard.Enter) {}
  var myText:String = box [boxNum].yourtextfield.text;  where yourtextfield is your textfield instance name class' are
  trace (MyText);
  If (myText is {answers [boxNum])}
  Reply.Text = 'It.';
  boxNum ++;
  Sandbox (null);
  } else {}
  Reply.Text = "try again.";
  }
  }
  }

• Creating the text caption and selecting organize for rear...

  Hello

  I placed some text captions that I'm organizing at the front, but all I get is the option menu to align...

  Anyone experienced this?

  See you soon

  Sabine

  Not a great solution, but have found a way around, simply move the particular object upwards or downwards on the time line toured ;-)

  Really strange though! (IMO)

  See you soon

  Sabine

• cannot create the file of text using fpga

  I spent an entire day to solve this problem, if someone help me please!

  I have two types of registration data, movement and time. I looked up NI EXAMPLE FINDER and copied the format to create the text file. but the file dialog box is not pop up. So I thought I did something wrong with the function of the dialog box, but when I copy the first part of my code, the dialog box appears. If anyone can check my host vi and tell me what is the problem? I downloaded the target vi as well.

  I use crio 9074, and vi is made in mode of fpga.

  Hi Ultrafrog,

  The RT vi or vi FPGA screws?

  In FPGA, you cannot file i/o. But you should be able to do this in your vi RT it seems you are trying to apply it on the FPGA.

• I have created a form in Indesign. Is there a way to create the default text in a text field that displays the interactive pdf "insert text here" in the text field?

  I have created a form for the company, so that I work. It is a form that will be used in several offices and has buttons, drop downs and text fields. One of the text fields has a requirement that when the PDF file is opened, the text field has something written in there already, as an example (and one only) INSERT the TEXT HERE. I created the text field in Indesign and used the text tool to type in the area of the body-copy required. After that I have to export it as an interactive PDF, text in the text field disappeared.

  Drop-down lists give an option for a default choice, but I don't see a way to create default text in the Panel of buttons and forms for text fields. Is there a workaround or a hidden feature?

  Thank you!

  Set it in Acrobat.