Create the new schema of database in jdev

Similar Questions

• How to create the new database in oracle 11g

  Hello
  I m new in oracle 11g, I downloaded oracle 11g and with the help of the guide of the developer-2 days, I learned all the SQL queries, but I worked with human resources database.
  Now, I want to create my own database with the required tables. Can anyone help me how I can make my own database in oracle 11g.
  
  Thank you
  Manna

  870692 wrote:
  Hello
  I m new in oracle 11g, I downloaded oracle 11g and with the help of the guide of the developer-2 days, I learned all the SQL queries, but I worked with human resources database.
  Now, I want to create my own database with the required tables. Can anyone help me how I can make my own database in oracle 11g.

  Thank you
  Manna

  Be sure to distinguish between the terms and the database schema. Other products, make them bad. It would be a HR diagram (or a user, which is the same in Oracle). If you do not need to use the database Wizard, unless you are working with a new host with no database.

  A simple way would be to get the DDL to create the HR schema and modify it for your own. It can be extracted from your database in several ways, or you can copy the hr_cre.sql to your own script and change. The two ways are educational, and you can google for instructions.

• create the new database programmatically

  I am creating a new MS Access database you want to connect a few results for in a labview program using the toolkit of connectivity datab ase.  The examples show how link and create a new table in an existing database file, but I want to create a new database and then insert a new table inside for my results.  Any ideas?

  You have installed Access where you can create a blank MDB file?  If so, you can create an and store it as a template in your program folder.  Copy and paste when you run your routine and use table VI to create in the Toolbox to create tables to write.  It is possible to create tables in an INSERT, but you can't control the properties of the fields.  The OP in this thread is doing this thing. (http://forums.ni.com/t5/LabVIEW/Database-connectivity-toolkit/m-p/3046359#M868188)

• The scheme < SOA > _OPSS is already used for the safety of the point of sale. Please create a new scheme

  All,

  version: 12.1.3

  I am trying to create a new area where I wanted to use the same scheme used in the existing domain.  It failed with the below error

  com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: security of the store DB configuration error. Oracle.security.opss.tools.lifecycle.LifecycleException of exception: the SOA12C_OPSS schema is already used for the safety of the point of sale. Please create a new schema.

  Is it mandatory that the scheme (creating the UCR) used in a field cannot be used for the new domain?  or am I missing something? Please notify.

  Thank you

  Sen

  That's the point... So actually you were never more than one domain using the same patterns, you have never shared patterns on different fields... You had a domain which would sometimes... Not possible in 12 c but because of OPSS more... Maybe you could just the OPSS schema duplicated, but you would always use the platform so that it was not intended to...

• Create the new database of complete hot RMAN, atrchivelog and backup control files

  Hi all
  
  I'm trying to create the new database U1234 of P1234 of full hot RMAN, atrchivelog and control P1234 file backup.
  
  Here are my steps
  
  (1) to restore the control file
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restorecontrol.out
  startup nomount pfile=/u01/oradba/admin/U1234/scripts/restore/restore071009U1234/initP1234.ora;
  the value of DBID 6767676;
  run
  {
  allocate channel d1 type disk;
  controfile catering to ' / u02/oradba/U1234/control/P1234_control01.ctl';
  Restore controlfile to ' / orarman/restore/P1234/cf_P1234_c-00';
  change the editing of the database;
  }
  EXPRESSIONS OF FOLKLORE
  
  (2) database stop then restart the database with the new contraol file using pfile.
  
  (3) restore data files
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restore_dbfiles.out
  Run {}
  the value of newname for datafile 1 to ' / u05/oradba/U1234/dbfile/U1234_system01.dbf';
  the value of newname for datafile 2 to ' / u05/oradba/U1234/dbfile/U1234_undotbs01.dbf';
  the value of newname for datafile 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  the value of newname for datafile 4 to ' / u06/oradba/U1234/dbfile/U1234_users_d01.dbf';
  the value of newname for datafile 5 to ' / u06/oradba/U1234/dbfile/U1234_tools_d01.dbf';
  the value of newname for datafile 6 to ' / u08/oradba/U1234/dbfile/U1234_audt_x01.dbf';
  the value of newname for datafile 7 to ' / u07/oradba/U1234/dbfile/U1234_audt_d01.dbf';
  the value of newname for datafile 8 to ' / u07/oradba/U1234/dbfile/U1234_audt_d02.dbf';
  the value of newname for datafile 9 to ' / u08/oradba/U1234/dbfile/U1234_lh_x01.dbf';
  restore the database;
  switch datafile;
  }
  EXPRESSIONS OF FOLKLORE
  
  
  ORA-27063: number of bytes read or written is incorrect
  SVR4 error: 28: no space is available on the device
  
  Now, I missed the space during the restoration of data files and want to restore remaining who is 3 and 4 of datafile datafile.
  
  Can you please let me know how I can restore it.
  
  I need to change the names of database after the successful restoration.
  
  DBVERSION 10.2.0.1
  operating system: solaris 10
  
  Thanks in advance.

  Hello..

  Do you have free space? If Yes, then you can try: -.

  RUN {}
  SET NEWNAME for DATAFILE 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  RESTORE THE 3 DATA FILE;
  DATAFILE 3 SWITCH;
  }

  [http://www.oracle-base.com/articles/9i/DBNEWID.php]

  Anand

• Question: How to create the new user and schema in 11g?

  Who can give me the answer how to create a new user and a schedule?
  
  I had installed oracle 11g DB and oracle in my OS windows client. I found in the 11g than there is no console management business with the new version. It is no different with oracle 10g. So I don't know how to create this new user.
  
  I had created a new DB instance, but I did not how to create a user on it. Who can give me a helping hand for who? I hope a give oracle experenice expert answers.
  
  Thank you very much!
  
  Published by: user774630 on October 27, 2008 22:01
  
  Published by: user774630 on October 27, 2008 22:09

  Hello
  I'm not sure which option you are talking about? [Do you use the EMCA, http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If this isn't the case, the command line that the other is using DBCA (Database Configuration Wizard). I think you're talking about that. Yes, if the message comes from creating the repository that soon after, you can connect to the EM. You would get the port no port HTTP of EM comes from the $OH/install/portlist.ini file.
  HTH
  Aman...

  Published by: Aman... on October 28, 2008 11:36
  Waived, insertion of link does not work.

• Unable to create the new workspace

  Dear community,

  in a new configuration 5 APEX instance of Oracle 12cR1 I get the error message "error TEST_WS commissioning. ORA-20001: ask 1691638015598602 could not be processed. PROVISION_COMPANY ".

  As part of the work, I've also configured to create a new scheme. The names are not yet used on the database.

  The error message is not helpful at all. Do you have tips how to get more details about the error message?

  see you soon,

  Alex

  I could find the cause of the error. The password provided for the creation scheme has no meat required complexity rules. As a result, I got this strange error msg.

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• How to use the model instead of RP pspice to create the new component?

  Hi, I need to create the model of opa890 of TI, but I found no spice I find model pspice, how to use it to create the new template part.

  Fouda, salvation

  I took a quick glance to the component but for some reason, the model pspice does not correctly applied to the component. The second problem was that the pins have been mapped properly. I've done the component for you with the model and print and attached it to this message. You just need to add it to your database of click with the right button on the component, and then clicking on save to DB component.

  If all goes well, you should start to see the results of the component. I hope this helps.

  Best regards

• Cannot create the new Application in FDQM

  Hello

  I couldn't able to create the new application in FDQM.

  The popup of warning message displayed as "impossible to connect to the database. Please check the databases and verify the database is accessible"

  Environment: SQL Server 2005, windows 2003 R2, FDQM version 11.1.2.2, selected OLE Provider, such as SQLOLEDB

  Please help me solve.

  Kind regards

  Naveen

  Finally, it is resolved.

  I selected SQLNCL1 instead of SQLOLEDB and managed to create demand.

• Unable to create the new domain file

  Hi experts

  I am trying to create the new domain file, but there is no success.

  Tools-> domain Administration > file-> Select

  When I choose, the dialog box open typed the new name for file field, you click Open.

  the error message is "mydomains.xml is not a domain file.

  Please tell me how to create the new domain file where you will store the areas associated with my project.

  Thank you

  Hello

  With the dialogue of the Administration of the areas, you modify xml with the areas. You cannot create a file or assign the file with the fields in given the design from there.

  Documentation:

  SQL Developer Data Modeler does not include the default domains file.

  To create new field definitions, select Tools > areas of Administration and click Add to create and add your own domains. These areas are added to the default value of the file, defaultdomains.xml, and can be used for all your projects.

  The file is located in /datamodeler/types/defaultdomains.xml

  Basically, you should

  1. create /datamodeler/types/defaultdomains.xml if it does not already exist

  See Tutorial: modeling of data for a small database

  2. create some (open) design and import file fields to file-> import-> areas

  3. after that study is registered again Directory /domains with design level domains file inside the tree of creation will be created.

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )
  

• change the position of the region in the middle of the page / create the new Point of view from the region

  I have used apex 4.1, 10.3 oracle database, theme 21 (scarlet) window7
  
  I want to change any position the region to appear in the middle of the page and I have tray every thing to do and no results
  
  I change REGION_ATTRIBUTES to be: style = vertical-align: middle
  and I add in the header of the region {< div style = "vertical-align: middle" > < / div > ""} and no results and the region do not move in the middle of the page
  
  
  My question is
  1 a way to make the region in middle of page other
  
  2. How can create the new Point of display area as (region Position2, Page (1) template body) with the middle position
  
  
  Thank you
  
  Published by: Ahmed Farouk on April 15, 2012 11:01
  
  Published by: Ahmed Farouk on April 15, 2012 11:01

  Hello

  No need to give ' style = vertical-align: middle ", replace it with this: nowrap ="nowrap"align ="center ".

  see if it works.

  and for the second, you can copy the existing model definition: model, in the table tag you can see #REGION_ATTRIBUTES #, simply add align = 'center' after this

  and apply this model in your area.

  Thank you
  Tauceef

• Partition Windows 10 does not start after you have created the new internal drive

  I'm running OS X 10.11.2.

  I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

  So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

  "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

  I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

  I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

  EDIT: I unfortunately do not back to the time Machine.

  Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

  Please after the release of

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):