Similar Questions

• When you try to create the simple volume, I get "There is not enough available space on the disks to complete this operation." Even when there is obviously a lot of space.

  I just installed Windows 7 Professional in the last hour and was not able to create this partition during the installation.  Now that I'm in disk management.  It's showing I 73,24 GB of free space.  What I'm trying to do in the end, is to combine this with a partition already created.  One thing I find strange is anytime I go into "new simple volume" it tells me that the maximum space in MB is 74997 when the free space on the graph shows me only 73,24 GB.  I tried to create the size of the volume to 73000 MB and have also tried 10000MB and get to every time the same mistake!  "There is not enough available space on the disks to complete this operation."  What can I do to fix this?

  Your best bet is a third party partition manager.

  With the tools of Windows 7, you can only shrink and extend partitions, apart from the creation and deletion of them.

  Disk manufacturers quote their sizes of disc in decimal format. Windows Go are 2 ^ 10 or 1024 decimal MB. Then 74997/1024 is 73,24 GB.

• Disk management does not allow me to create the simple volume

  I have a 60 GB SSD and a 1 TB drive.

  I reinstalled Windows 7 and partitioned md SSD for the OS. I want to use my hard drive for storage.
  So now I have the SSD as my drive (C :) with only the OS and installed programs important. When I go to disk management, it shows my disk 0 looking fine, then it shows my disc 1 (my 1 TB HHD) empty, not even let me create a simple volume.
  Whenever I do a right-click on disk 1 I only get the option "change drive letters and paths...» »

  How can I fix it?

  Go to http://www.easeus.com and download free Easeus Partition Master.  It is much easier to use and works when the Windows disk management program is not.

  Good luck.

• Could not create the user-defined variables. Help, please.

  Hello. Maybe I will have a PET of brain, but when I click on the double gears (see illustration) to create a new variable, nothing happens. I can create sets of variables, but not UDVs. Anyone know what gives?

  THX.

  -KUrt

  

  My guess is that it's because you have a named Variable set to the specific point. Click on the sample "ke" drop-down and changes to focus the and you should be golden.

  See you soon... Rick

• create the image cache variable

  Hello world

  I use swfloader for loading an image and store its contents in an array, so if it is loaded again in the future it can be loaded directly from this variable instead to download again.

  First time when I load the image, it is loaded correctly and when I load the image even secondtime, it loads correctly for this variable, but old image is removed from the page. I am not able to understand what is the cause, here's the code I used for that.

  public void loadimage(_data:Object) {}

  check if it does not exist in the cachedata variable, then download another load from the cache

  If (cachedata [_data.url] == null) {}
  var _swfloader:SWFLoader = new SWFLoader;
  _swfloader. Load (_data. (URL);
  _swfloader.addEventListener (Event.COMPLETE, EventDelegate.create (onImagesComplete, imgconta iner));
  } else {}
  imgcontainer.addChild (cachedata [_data.url]);
  }

  }

  public void onImagesComplete(event:Event,imgcontainer):void
  {
  var __tpLd:SWFLoader = event.target as SWFLoader;
  var imgContents = __tpLd.content;

  store in the variable cachedata

  CacheData [filename] = imgContents;

  var extension: String = filename.substring (filename.length - 3, filename.length);

  imgcontainer.addChild (imgContents);

  }

  Please help me on this...

  Thank you

  It's because you're cached _tpLd.content which will be a Bitmap object. Thus, as soon as you do an addChild again about it, it will be removed from the previous container because it can have only one parent.

  The solution is rather to BitmapData cache:

            varbitmapData:BitmapData = (contentasBitmap).bitmapData;

  _imageDataCache.putImageData (_imageId, bitmapData);
  For example, you can reuse it by building a new Bitmap of the same BitmapData object. The difference in memory usage will be negligible that you use again the same BitmapData.
  Here is an implementation of the CachedImage with ImageDataCache component so that we do not have to write the plumbing around code. You can use or modify your code in the same direction. It is available at:
                                http://xebee.xebia.in/2010/11/25/Flex-in-memory-image-cache/

• Too bad!!! Do not have option to create the simple volume.

  I was clicking on the box on the left. When I clicked on the rectangular area to the right of the box, everything was fine.

  I have just connected (via USB 3.0, Icy Dock MB559u3s-1 s box) 1 TB West hollow. Reader FBYX WD 1003.  I've initialized as a disk MBR incase it was necessary to be used with another system.  It shows that the space that is not allocated as it should.  The problem is when I right click on the symbol, I don't get the Volume Simple formatting option.  The only options are for covering, scratches, etc.  My existing music player will expose a scary behavior so any help would be appreciated.

  Henry Aguado

  Hi Henry,.

  It seems that you have solved the problem.

  It would be better if you can let us know the current state of this issue. We will be happy to help you.

• I installed streets & trips 2011, seems to install fine, but can not open because the base register not copied correctly. Redone over and over again and more, still does not.

  Installation went well.  Try to open and run, message States registry settings not copied correctly, install it again.  A redone several times, same message several times, I tried the suggestions of support, nothing works.

  Hello

  Try editing a right-click on the setup.exe - then run as administrator

• Create the registry variable

  Hello

  I'm looking to create the registry variable, the script console and came across this post http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19557561.aspx to create the simple registry variable.

  However, I need to add registry values to objects of topology (FxMApplicationResult to be precise). Is there a way to do this in the script. Can you please indicate.

  Thank you

  Vincent

  To add that John has already provided.

  This will allow you to query the outside object and assign the value.

  She could use additional checks of types etc. but a quick way to reach of many objects to a specific value that are not part of the global default value

  // Name of the Registry Variable we are going to updatedef regVarName = 'SampleRegistryVariableName'  
  
  //Value we want to set on the returned objects.//This is based on the registry Variable Type (Double, Long, Integer, String, Boolean, Timestamp, Password)def newRegValue = 99 as Double
  
  // Query to return the objects we want the registry value scoped toodef topologyQuery = #!Host where name like 'host%'#
  
  // Get the Registry Service to execute the registry updatedef regSrv = server["RegistryService"]
  
  // Get the registry variable for updatedef regVar = regSrv.editRegistryVariable(regVarName)
  
  // Get all existing values for this registrydef values = regVar.getRegistryValues()
  
  // Loop through the objects returned from the queryfor( obj in topologyQuery.getTopologyObjects() ) {
  
  // create the registry value object associated to the current object in loop   newTop = regVar.createTopologyObjectRegistryValue(obj.uniqueId)
  
  //set the value defined within newRegValue   newTop.setDefaultValue(newRegValue)
  
  //add the topologyObjectRegistryValue to the Array of existing values   values.add(newTop)}
  
  // Store the values within the Registry VariableregSrv.saveRegistryVariable(regVar)
  

  Hope this helps your use and any other case.

• Cannot create the page setting

  Hi all
  
  I'm implementing a custom search by using the setting simple portlet. I did in the past without any problem, but for some reason that I can't make it work.
  
  The search results report was created with the public setting "csearch.
  I created the simple parameter Search portlet and dropped the report of results on the same page.
  
  Now in the properties page, and on the settings tab. Given the new name of parameter "searchbox" and Param1 set for the gear and the search results for "searchbox".
  
  However, if I do a search, the URL name is the parameter 'Field1' not 'searchbox '. If I replace the "searchbox" URL manually it works fine.
  
  Any ideas how I can get it to stop using 'field1 '?
  Thank you

  Well, I thought you were using 10.1.4. but in this case, it is not too much difference.

  In your report, you have the following?
  In the customization form display Options screen, set 'Make Public' checkbox for the variable binding searchField.

  If this does not help, then go to Navigator / develop / manage the report and then regenerate your report.

  -also, in one of your previous posts, you asked about the problem of the Action url, when you follow 255438.1.
  Here according to your next hierarchy, you should try using like below:

  Page groups > TestPortal > Pages > Advanced > search results

  
  

  Please update with your results.

  Kind regards

  AMN

  Published by: AMN on June 24, 2009 02:31

• create the cookie using pl sql and retrieve values

  Hello
  I am currently in an urgent need to create cookies to BE oracle and also read the values of the. I tried to use code below. his display error
  code
  DECLARE
  ourcookie owa_cookie.cookie;
  BEGIN
  ourCookie: = owa_cookie.get('SESSION2');
  END;
  /
  
  BEGIN
  
  owa_util.mime_header ("text/html", FALSE ");
  
  -Create a cookie
  (owa_cookie). Send
  name = > 'SESSION. "
  value = > '344444',.
  expires = > sysdate + 2,.
  path = > ' / ');
  
  
  owa_util.http_header_close;
  
  EXCEPTION
  WHEN OTHER THEN NULL;
  
  END;
  
  
  But when I'm reading the cookie that I created, I am unable to exercise
  
  -It's for reading cookies
  DECLARE
  ourcookie owa_cookie.cookie;
  BEGIN
  ourCookie: = owa_cookie.get('SESSION2');
  END;
  /
  
  error:
  ORA-06502: PL/SQL: digital error or value
  ORA-06512: at "SYS." OWA_UTIL", line 325
  ORA-06512: at "SYS." OWA_COOKIE', line 36
  ORA-06512: at "SYS." OWA_COOKIE', line 140
  ORA-06512: at line 4 level

  842106 wrote:

  Now according to the guidelines of your comment, I created a simple OWA environment and run the code below. Now I get not found error of data

  ORA-01403: no data found
  ORA-06512: at line 23

  The error is caused the cookie is not found.

  The following is not valid - as there is no browser to receive the cookie:

  (owa_cookie). Send
  name-online "SESSION1"
  value-online '344433',
  expires => it sysdate + 2,.
  => path ' / '.
  );

  The following code must set the CGI environment - and add the cookie to the environment for the following code to read (as shown in the code example that I posted in the 2nd thread I talked to you):

  / * Initialization * /.
  OWA.cgi_var_name (1): = 'something ';
  OWA.cgi_var_val (1): = "other";
  OWA.init_cgi_env (1, owa.cgi_var_name, owa.cgi_var_val);
  / * End initialization * /.

  Of course, the following code will fail with a NO_DATA_FOUND there is no cookie.

  ourCookie: = owa_cookie.get('SESSION1');
  v_session: = ourCookie.vals (1);

  So it is not possible to create a true cookie and retrieve the value of CGI environment or apex not?

  Yes. But the web browser is non-existent. Then, you need create the CGI environment, which would have created the web server, before you call your allowed web code PL/SQL.

  In other words, if your initialization code of CGI should pretend that it is the web server, he received the call from web browser, it received the cookie (s) from the web browser - and now she needs to create the CGI (including cookies) environment for this web browser, and then call the procedure PL/SQL referenced by the browser in the URL, he argued.

• How to assign groups to the Group Session variable in the initializtion box

  Hi all
  
  I have a requirement that I use a separate table for the table separately for the information of the user and group information.
  so in this same user belongs to multiple groups, so how do I assign these groups to single user
  I use external authentication of table...
  
  so everything will be done at the level of the session if, my problem is that I'm not able to assign multiple groups to single user,
  How to create the GROUP Session variable in the box initialization
  (here I'm horizontal initialization option)
  
  Please help me
  
  Thank you
  Françoise

  Thanks for the fence wire...

  Assign points if you feel that my post is correct and useful for your problem

• Failed to create the recovery disk

  Hello.
  I'm trying to create a recovery CD but there was this error
  http://www.Tinypic.pl/rfjfibbhef1k
  help please

  Is there an option to create the USB stick recovery?
  If Yes, please test and send feedback.

• Creating the file on Blackberry

  Hello

  According to my understanding, there are two ways to access the file on blackberry system.

  (1) through J2ME JSR - 75... but in this case combined approval alert popups and the solution to avoid this problem is always only one carrier signature. I checked this with Blackberry "BOLD".

  (2) net.rim.device.api.io.File API - but I found no way to create the file. It provides APIs to only delete and rename the file.

  so the question is (1) how do I create the file via the RIM API?

  (2) will appear this API the user confirmation alert? I already had the blackberry code signing keys.

  I referred to the http://www.blackberry.com/developers/docs/4.6.0api/index.html.

  Thanks in advance.

  Kind regards

  Samir.

  Have you tried with ApplicationPermissions.

  Concerning

  Bika

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• Create the path

  Hello. I'm trying to follow a tutorial, but I don't get the options they do.  Basically, I created an image and converted into a clip.  Inside that clip, I create a new layer and I give both layers of 70 executives.  On the top layer, I then draw a path, right-click on the layer and choose guide.  I then and drag the lower layer, which represents my video clip under the guide layer.  The next step is to right click on the background layer, my object layer, and then choose create the motion tween.  This is blackened me however, and my only option is to create a classic Tween.

  As a note, I use CS5 and the tutorial, I'm following seems to use an older version.  In addition, they don't do a right-click on the layer and choose the motion tween.  They choose the layer and as their properties panel, they have an option of interpolation in the menu drop down, they choose the movement.  I can't find this option button in my interface however.

  Is there a reason why he used to allow me to make a motion tween?

  see you soon

  http://www.YouTube.com/watch?v=9AFVUZAmqQY

  I would like to know if it works for you.