Creates a new partition and now bootcamp is not recognized

Similar Questions

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Assistant of migration used just one new imac and now cc does not work!

  Please help I just transferred all of old imac to a new imac with the migration but assistant now cc does not work, I got error message saying: "cc is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy of the cc. "Well I've done a few times now and re mac began and also updated but still say the same thing.

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Let us know if that helps.

  Kind regards

  BANI

• I did the att update and now it's not recognizing the netgear router which has been great for the last 8 months. I have the 2 wires then the router.

  I did the update and then he asked me to choose a network address, I have seleceted one and now can not go further

  HI Jeannie,

  If the connection wasn't working before the update, and not after, looks like it's the driver who needs to update, so download the newest one (or one you know you were using previously) and load.

  Also, here is a link for troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  hope this helps,

  B Eddie

• Tried to increase the bootcamp partition and now Windows will not boot

  I've got Yosemite.
  I wanted to increase the size of my bootcamp windows partition, so I searched for a way online, and I found this video:

  https://www.YouTube.com/watch?v=zhkdOLXT6Eg

  I followed all the steps in the video, but after you have started and to complete the process of the Minitool partition Wizard I got this screen:

  http://i.imgur.com/bRnDQuJ.jpg

  This is what looks like my disk utility:

  https://i.gyazo.com/ee9967fc7ac9a2d1ad9afc5cde2f3529.PNG

  It seems that free space is always there

  Is there a way to fix this?

  MiniTool is not recommended because it causes problems and can lead to data loss.

  OS X Terminal please after the release of the following OS X Terminal commands. Enter your password when you are prompted by the command 'sudo '.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  Do not change the partitioning information any more, otherwise, you will lose your Windows data permanently.

• My hard drive has left an old system to a new system and now I can not activate Windows.

  Cannot download the drivers to activate Windows

  I spent two days now trying to get a computer at work, I've built. I use new parts other than my used hard drive previously. I was not able to install the drivers for my network so I'm stuck right with the activation screen when I connect. If I do not activate and then I get kicked out and have to log in again. I cannot connect to the network to turn on obviouly and when I call them they say my ID intillation in does not correct and they don't recognize it as a valid product. I then remove my hard drive and put it back in the old machine and as if by magic, it works fine after activation. How am I supposed to install my drivers so I can activate if I can't go to my screen to install? This is the second time that this happens, and I really not prefer to buy a new windows disk for something that already works.

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• I buy 2014 Minister cs6 pro and I buy a new computer, and now I do not have a link to download cc only! Help

  Help

  Check your Adobe account online if you have purchased from Adobe.  There should be a download link.  Otherwise, the following page may be useful...

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• I need help to create a new partition of the drive c. main on my laptop

  OK, I already tried to create a new partition and it did, but the new partition I created has become "unallocated" I don't know why, I have read the information online and they say that you cannot remove a player from the "unallocated" partition, so I am trying to create a new partition on this drive "unallocated". when its almost finished, I get warning all the time

  the operation you selected will convert the disk from basic to dynamic disk selected s. If you want to convert the disks to dynamic disks, you will not be able to boot operating systems from any volumes on the s drive (except the current boot volume). Are you sure you want to continue?

  I want to create a new partition on this disc, please help

  When I click Yes, it brings an error message saying, the 'dynamic disks are not supported on this operating system.

  I use Windows Vista Home premium

  http://www.Vistax64.com/tutorials/95398-disk-management-shrink-partition.html

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Good info on above links.

  Read the related links section, also.

  Unallocated space is what it says it is: nothing.

  Normally, you right click on your existing drive > extend the Volume > makes a great.

  Or follow the instructions at the link above to make a second Partition to unallocated space...

  See you soon... Mick Murphy - Microsoft partner

• Printer print printing printer will not align. Worked very well, put in new cartridges and now will not align.

  My HPPhotosmart C5580 all-in-One worked very well.  Put in new cartridges and now she is not aligned.  Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work.  Help.

  This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.

• Bootcamp does not start after you have created the new partition

  Hi, I accidentally created a new partition on my mac OSX 10.11 and then discovered that my bootcamp would not start. After that, I deleted the partition but the disk for the BOOTCAMP partition identifier was disk0s5 instead of disk0s4. is anyway to fix this?

  Thanks in advance.

  The disc is now disk0s4, but when I try to boot in bootcamp, it says no bootable disc detected

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Got erro 'We couldn't create a new partition.' installation Win 8 via bootcamp

  I was installing Windows 8 pro via bootcamp on an iMac with the new installation of recovery.

  It's my fusion drive before installing windows:

  

  However, I got the following error during the installation of Windows 8 pro via Bootcamp, even though I formatted disk 0 Partition 5 Bootcamp:

  We could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  So I have to quit Setup and go back to Mac OS X and delete the Windows via Bootcamp partition:

  

  

  Can I ask you why windows cannot be installed on this partition formatted? and how to fix this?

  (I just picked up the iMac to a disk fusion problem before installing recently: El Captian is not installed on the part SSD disk fusion after recovery of the internet)

  It's frustrating because I installed Windows 8 successfully via Bootcamp when I received the new iMac earlier.

  Advice and emergency aid are necessary!

  Thank you!

  When you say that you have formatted your Windows partition, you format you through installation of Windows (2nd screenshot)? To this screen that displays all partitions, you have chosen the one you want to install to and then click on Format for the Windows install process can format NTFS?

• Setup could not create a new partition, new z510 non-OS and windows 7

  Hello, I have a huge problem with windows install. Clean all the partition using windows install to create two partitions: 100 GB and GB 890. When I try to install windows I see:

  Setup was unable to create a new partition or system to locate a system partition. See logs of installation for more information"

  

  I put:

  Configuration: Controller-> Compatible Sata Mode

  Start mode: Legacy Supprt

  Boot priority: first Legacy

  Need help, help me.

  SOLVED... I tried to install the USB drive... there couse a problem.

• How to on windows 8.1 PRO create the new partition, save image system on it and restore it from this image

  HP pavilion model - 17-e054ca

  After upgrading to PRO 8.1 window I see
  C:\ 932 GB
  D:\ 28 GB-sized recovery

  I want to save system image backup
  Currently, to create the system image backup, I have only one option to create the image on the external drive or on D:\

  1 is it possible without having to reinstall windows create new partion E:\ in order of the system backup images that him?
  If yes how to create new partition in win.8.1?
  2. If the partion E:\ will contain system images can I boot from usb drive recovery and choose one of the system located on E:\ restoration images
  3. If for some reason I want to reinstall the operating system from the recovery set DVD (s) factory setting of what is going to happen with partion E:\
  4. What is-locations of D:\ marked as recovery?

  1 is it possible without having to reinstall windows create new partion E:\ in order of the system backup images that him? If yes how to create new partition in win.8.1?

  (1) YES. Please see Computers HP - partitioning and naming (Windows 8) readers for the instructions titled "create a new partition.

  2. If the partion E:\ will contain system images can I boot from usb drive recovery and choose one of the system located on E:\ restoration images

  (2) YES, provided that you mean a 'repair Windows USB drive '.

  3. If for some reason I want to reinstall the operating system from the recovery set DVD (s) factory setting of what is going to happen with partion E:\

  (3) If you "reinstall OS" a set of recovery discs HP or an HP Recovery USB Flash drive, partition 'E:\. "is erased as support for HP recovery returns the computer to a factory State. I suggest that you store your "Backup of System Image" windows on an external hard drive for best results.

  4. What is-locations of D:\ marked as recovery?

  (4) the purpose of the "D:\". "HP recovery partition is to create your recovery HP personal media, return the computer to a factory State and restore the originally installed drivers and software.

  If you have any other questions, feel free to ask.

   

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.