Creating a database with only the RMAN backup

Similar Questions

• recover the database by using the RMAN backup archivelogs

  Hello
  
  I tried to find the resolution of this problem in google a lot but couldn't find something useful.
  
  Location:
  
  We try to clone the dev environment of production that are completely on different servers and do not share a common mount point.
  Backup RMAN of PROD with RMAN as well as arch newspapers are kept in this mount point.
  We took control of backup files of PROD restored in DEV fired restore with recovery until a when not.
  Turns out that the sequence was not saved in right backupsets there if recovery has not requested more arch newspapers that are present in the PROD.
  Archs are stored in ASM and only way out is to take of RMAN backup of them.
  We control the file as a repository for RMAN.
  
  my questions are
  
  1. surely, I need to take backup of the control file after I take the log arch by RMAN backup and restore this file command in the DEV of so that when I start RMAN recovery in DEV, database will be able to find the backupset with arch newspapers. But the new restore a control file will delete the data files restored information?
  
  2. If we did not have a point of common Assembly and then after sending the backup destination elements how the database would be the locations of the game copied to the new location of the control file that is restored from the backup source?
  
  Suppose that in the source backups are stored in/backup/rman
  in destination copy us in/backup/clone
  in the PROD control file, their locations are saved in/backup/rman
  so if I restore this command file in custom DEV it find the elements of backup in/backup/rman?
  is it possible to save a backup of outside item in the control of a database file?
  
  
  3 al ' ASM, is there another way to extract the PROD archive logs and apply them to a cloned instance? (sending of newspapers without DR)
  
  The help is very appreciated.
  
  Kind regards
  Marjorie Dutta

  1. .... But the new restore a control file will delete the data files restored information?

  N ° provided that you do not have renamed, moved or abandoned any of the data files that were already copied in DEV. (also, subject that you did not add da new Production data between two backups - otherwise the new controlfile file will wait as datafile also to be present at DEV).
  You will do an incomplete recovery until a certain SNA / sequence # if information subsequent archivelogs beyond your point of recovery in the controlfile are redundant. In addition, a RESETLOGS would be done when you OPEN the database.

  2... how to know the locations of the game copied to the new location of the control file that is restored from the backup source database?

  What is the order CATALOG. In 9i, CATALOGUE could only of catalog datafilecopy. In 10g and more, you can BackupPieces CATALOGUER. Thus, it would "update" the controlfile (which is the RMAN Repository) with information about the BackupPieces that are present in a replacement / new location.
  See http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref230

  3. ... ASM, is there another way to extract the PROD archive logs and apply them to a cloned instance?

  According to the version you are using, ASMCMD has a 'cp' command to copy the files from the DSO for the operating system. However, you cannot use ASM to apply directly the archivelogs. You always use the 'RECOVER' of RMAN or SQL command line command.

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Restore the RMAN backup to another database server

  Hello
  I create the instance TEST for my database of Production (PROD). I have a model base (MODEL) that is running on a different host.
  
  I can restore the RMAN backup taken on the PROD database to the MODEL database.
  
  
  Thanks in advance
  Amith

  Amith r wrote:
  Hello
  I create the instance TEST for my database of Production (PROD). I have a model base (MODEL) that is running on a different host.

  I can restore the RMAN backup taken on the PROD database to the MODEL database.

  Thanks in advance
  Amith

  Tychos said, why not use command DUPLICATE RMAN DATABASE to create the clone of the database?

  Anyway, you can easily restore the database on the new host using the steps mentioned in this link:
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• Purge the rman backup

  Hello, since the alert.log file find this error:
  
  Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc3_25352.trc file:
  ORA-19809: limit exceeded for file recovery
  ORA-19804: cannot retrieve 12582912 bytes limit 59055800320 disk space
  ARC3: 19809 creation error archive log file ' DATA01'+.
  Sea 25 09:51:58 Jan 2012
  Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc0_25306.trc file:
  ORA-19815: WARNING: 59055800320 bytes db_recovery_file_dest_size is 100.00% used and has 0 bytes remaining available.
  ************************************************************************
  You have choice to free up space in the recovery area:
  + 1. Consider changing the RMAN RETENTION POLICY. If you are using Data Guard +.
  then consider changing POLICY of DELETE ARCHIVELOG RMAN.
  + 2. Back up files on a tertiary device such as a tape using RMAN.
  SAFEGUARDING RECOVERY AREA command.
  + 3. Add disk space and increase the db_recovery_file_dest_size setting to +.
  reflect the new space.
  + 4. Delete unnecessary files by using the RMAN DELETE command. If operation +.
  the system control has been used to remove the files, and then use the RMAN DUPLICATION and
  Commands DELETE has EXPIRED.
  ************************************************************************
  Errors in the /u01/oratest/diag/rdbms/test/TEST1/trace/TEST1_arc0_25306.trc file:
  ORA-19809: limit exceeded for file recovery
  ORA-19804: cannot retrieve 12582912 bytes limit 59055800320 disk space
  ARC0: error creating 19809 archive log file ' DATA01'+.
  
  So I'm trying to purge the rman backup, but I have an error message:
  
  
  rman target = oratest@oraprdlnx1:~$ /+.
  Recovery Manager: release 11.2.0.1.0 - Production on sea Jan 25 09:47:30 2012
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  connected to target database: TEST (DBID = 2044700519)
  
  + RMAN > show all; +.
  
  using the control file of the target instead of recovery catalog database
  RMAN settings for database with db_unique_name TEST are:
  CONFIGURE REDUNDANCY 1 RETENTION STRATEGY; # by default
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/oratest/product/11.2.0/dbhome_1/dbs/snapcf_TEST1.f'; # by default
  
  + RMAN > allocate channel for maintenance of type; disc +.
  
  allocated channel: ORA_MAINT_DISK_1
  channel ORA_MAINT_DISK_1: SID = 237 instance = type of TEST1 = DISK
  
  + RMAN > crosscheck backup; +.
  
  "" element of verified backup: turned out to be "AVAILABLE"
  backup handle piece = RECID = 68 = 758320264 STAMP DATA01/test/autobackup/2011_08_04/s_758320263.794.758320265 +.
  Cut objects 1
  
  RMAN > delete obsolete; ** +
  
  RMAN retention policy apply to the order
  RMAN retention policy is set to 1 redundancy
  Remove the following obsolete backups and copies:
  Making key time filename/handle type
  -------------------- ------ ------------------ --------------------
  Backup Set 25 July 4, 11
  Backup total 25 4 July 11 1omgk64v_1_1
  Backup Set 26 July 4, 11
  Backup total 26 July 4, 11 1pmgk650_1_1
  Backup Set 24 July 4, 11
  Total backup, 24 4 July 11 1qmgk650_1_1
  Backup Set 21 July 4, 11
  Backup total 21 4 July 11 1rmgk650_1_1
  Backup Set 28 July 4, 11
  28 1vmgk69v_1_1 July 4, 11 total backup
  Save game 29 July 4, 11
  Backup total 29 July 4, 11 20mgk6a0_1_1
  Backup Set 30 July 4, 11
  Backup total 30 4 July 11 21mgk6a0_1_1
  Save game 31 July 4, 11
  Backup total 31 July 4, 11 22mgk6a0_1_1
  Backup Set 34 4 July 11
  Backup total 34 4 July 11 c-2044700519-20110704-07
  Backup Set 35 July 4, 11
  Total backup, 35 26mgk8ib_1_1 4 July 11
  Backup Set 36 4 July 11
  Backup total 36 4 July 11 c-2044700519-20110704-08
  Backup Set 41 4 July 11
  Backup total 41 4 July 11 28mgk94i_1_1
  Backup Set 42 4 July 11
  Backup total 42 4 July 11 29mgk94j_1_1
  Backup Set 37 July 4, 11
  Backup total 37 4 July 11 2amgk94j_1_1
  Backup Set 40 July 4, 11
  Backup total 40 July 4, 11 2bmgk94j_1_1
  Backup Set 38 July 4, 11
  Backup total 38 4 July 11 2cmgk95c_1_1
  Backup Set 39 July 4, 11
  Backup total 39 4 July 11 2dmgk95k_1_1
  Backup Set 43 July 4, 11
  Backup total 43 July 4, 11 c-2044700519-20110704-09
  Backup Set 46 4 July 11
  Backup total 46 4 July 11 2fmgk99f_1_1
  Backup Set 47 July 4, 11
  Backup total 47 4 July 11 2gmgk99g_1_1
  Backup Set 44 4 July 11
  Backup total 44 4 July 11 2hmgk99g_1_1
  Backup Set 48 4 July 11
  Backup total 48 4 July 11 2imgk99g_1_1
  Backup Set 45 4 July 11
  Backup total 45 4 July 11 2jmgk9a9_1_1
  Backup Set 50 4 July 11
  Backup total 50 4 July 11 2kmgk9aq_1_1
  Backup Set 49 July 4, 11
  Backup total 49 4 July 11 2lmgk9aq_1_1
  Backup Set 51 4 July 11
  51 4 July total backup has 11 c-2044700519-20110704-0
  Backup Set 56 4 July 11
  Total backup 56 2rmgk9qb_1_1 July 4, 11
  Backup Set 55 July 4, 11
  Backup total 55 4 July 11 2smgk9qb_1_1
  Backup Set 58 4 July 11
  Backup total 58 4 July 11 b c-2044700519-20110704-0
  Backup Set 60 4 July 11
  Total backup 60 2umgk9tb_1_1 July 4, 11
  Backup Set 61 4 July 11
  Backup total 61 4 July 11 2vmgk9tc_1_1
  Backs up the entire 62 4 July 11
  Backup total 62 4 July 11 30mgk9tc_1_1
  Backup Set 66 4 July 11
  Backup total 66 4 July 11 34mgk9ua_1_1
  Backs up the entire 65 4 July 11
  Backup total 65 4 July 11 35mgk9ua_1_1
  Backup Set 67 4 July 11
  Total backup, July 4, 11 c-2044700519-20110704-0 67C
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the delete command to the 25/01/2012 09:48:42
  RMAN-06091: any string allocated for maintenance (of a suitable type)
  
  How can I purge the db dest file recovery?
  
  Thank you!!!

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the delete command to the 25/01/2012 09:48:42
  RMAN-06091: any string allocated for maintenance (of a suitable type)

  There is a metalink note that talks about this error.

  Met RMAN-03002 and RMAN-06091 when deleting obsolete backups [567555.1 ID]
  RMAN could not remove obsolete in right Backupsets change Sbt_tape to disk and again Server [ID 1287755.1]

  HTH

  Kind regards
  Nagendra Chillale

  Published by: NC on January 25, 2012 17:00

• Restore the RMAN backup on another server

  Hello

  ENV: Oracle 10 g 2 64 bit, RHEL 5.8 64 bit on ASM, Database size = ~ 1.3 to

  Backup RMAN of PROD will FRA and then backed up to tape. I have limited access to the PROD because it is maintained by 3rd party.

  My client is planning to move this database on their own datacenter (from the 3rd party data center). For test purposes, I asked DBA of 3rd party to provide us with an export of drawings required data pump. Export takes about 8 hours, and the import takes the same time to the new location. To copy the files exported to new locations takes another few hours (over the network). The total size of the dump file is around 500 GB. Thus, a whole cycle of Export-Import-copy takes about ~ 20 + Hrs.

  I want to try another option to reduce the time required for the updating of the database of PROD and which is "use RMAN backup of PROD ' and restore it on the data center server. RMAN full backup takes ~ 4hrs PROD and the restoration should be at the same time (new server has better and faster HW, storage with a SSD). I found this thread very useful on the Oracle Forms on this topic:

  Restore backup RMAN on another server

  This thread contains very good example for a restoration of database on the file system.

  I have a bit of confusion because my database uses ASM. The default location of the backups in PROD is FRA (on ASM == > db_recovery_file_dest = + FRA ). If I understand correctly, the RMAN backup must be in the same place where he was on the PROD Server - i.e. the diskgroup FRA.

  If I get a copy of the part 3 RMAN backup, how would I copy on FRA?

  OR can / should I just change the init parameter "db_recovery_file_dest" on the new server to point to the file system directory where the backup (say "/ ora_backup") and RMAN will pick up and restore the database?

  Please advise!

  Best regards

  You can restore the backup files to any location, then you must configure the channel using the "CONFIGURE CHANNEL device type disk format 'new location ';

  This thread will help

  Restore from a different location from the original location of RMAN backup

• How to restore the rman backup file

  Hello world
  
  I have the rman backup file by cutting the rman full backup of a file week rman to orginal path to another disk because of disk space is low. I need to know how to restore this file to the database. Can someone help me please.

  Hi, try as

  RMAN target sys/pass
  Catalogue start with 'rent' (which you moved from backup files)
  restore the database;
  recover the database;
  ALTER database open;

• Pull on the RMAN backup archive logs?

  Environment:

  Oracle 11.2.0.3 EE on Solaris

  Physical standby

  I have a gap of journal archive at the moment.  The missing archive logs have been saved on the primary and have not yet been transferred to waiting due to some maintenance work performed on the standby server.

  The database will be able to recognize that the missing archivelog files are in the RMAN backup files, restore them and send them to the update server standby for application?

  If not, will it restore manually, copy them to the standby server and save them for their application?

  Thanks a lot for your help!

  -gary

  Were the archivelogs deleted on the primary once they have been saved? If they have been deleted on the primary, then you can:

  1 manually transfer the backup to forward files

  2 replace the archivelog destination configured on the eve

  3 restart the managed recovery on the standby process, and the computer should be able to detect and apply the missing archivelogs.

  If they have not been deleted on the primary and are always available in the archivelog directory configured, then the process of Data Guard should be able to detect and automatically fix the gap.

  If you have a long interval archivelogs missing and you use + ASM, you can also try to use an incremental backup to roll forward the database pending, this article provides a good step by step: the steps for Rolling forward a standby database using RMAN incremental backup. (Doc ID 836986.1)

  Kind regards
  Oscar

• Switch journal during the RMAN backup

  I saw a lot of scripts in RMAN backup that a manual log switching is performed in the first line of the script? That is - this goal, just to write the changes necessary to rebuild instructions DML/DDL of redo log online and start archiving process so db runs in log mode archive?

  918868 wrote:
  I saw a lot of scripts in RMAN backup that a manual log switching is performed in the first line of the script? That is - this goal, just to write the changes necessary to rebuild instructions DML/DDL of redo log online and start archiving process so db runs in log mode archive?

  This could be the only reason, but even this is not necessary, as would a log switch automatically to push the current log file again to do is archive log and include it in the RMAN backup.

  Aman...

• make it work how I want that he the rman backup-shared-disk fix - up

  Network of Oracle greetings!
  (Oracle 10g enterprise edition on windows server 2003 platform)
  
  http://www.DBA-Oracle.com/t_os_error_os5_access_denied.htm
  
  is a link where a fix on the location of the rman backups is suggested. It asks me to change logon oracleservicesid. my database is what runs a Web site. When I change the connection oracleservicesid the Web site is no longer functions.this is not desirable.
  How can I fix it?
  Even on my test server that hosts the databases, change the opening of session oracleservicesid to administrator, disable all connections made to the database on the local network using SQL developer. How to not let that happen?
  
  Help, please
  Thanks in advance
  cordially 946207
  
  Edited by: 946207 July 14, 2012 03:01

  10g is desupported for a long time.
  Your question is you backup to a network drive.
  The solution provided by Donald Burleson is correct.
  Why the site no longer works is not clear that you provide no error message, or whatever.
  Course, a simple solution would be to buy an extra drive to connect directly to the server.
  Your post is poorly understood why you plan to implement that.
  Also, your statement on the test server is far too vague. You did not yet provide no error message.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• How to save a database to use the RMAN catalog using the OEM 11 g grid

  How to save a database to use the RMAN catalog using the OEM 11 g grid?
  
  ---------------------------------------------------------------------
  Enterprise Manager Version: 11.2.0.2

  See the availability tab, and then click 'Recovery catalog settings' under the Backup/Restore Configuration.

  Choose the option 'Use Recovery Catalog'. Click the 'Add Recovery Catalog' button to add the recovery catalog. And fill required fields like username, host, port, sid, etc..

  Talip Hakan Öztürk
  http://taliphakanozturken.WordPress.com/

• Error creating of databases - cannot load the library backend "oci.dll.

  Hi all
  I'm newbie Timesten IMDB (in memory database). I do not wish to use oracle RDBMS.
  
  I installed the Timesten IMDB on Win2003.
  
  E:\TimesTen\tt70_32\bin > ttVersion.exe
  TimesTen release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04 - 05 T 00: 54:16Z
  Forum admin: m4sadm
  Home Directory Forum: e:\TimesTen\tt70_32
  Demon base directory: e:\TimesTen\tt70_32\srv\info
  
  
  When installing, I followed the Viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
  
  Now, I'm planning to create a database and therefore the Viewlet subsequently: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
  
  However, when I give the command (according to the Viewlet), I get the following error:
  Command > select * from v version $;
  5102: unable to load library 'oci.dll' for Cache Connect backend. "< Empty > OS error message."
  The command failed.
  
  
  Can someone provide pointers to solve this problem?

  It is perfectly possible to use TimesTen as a stand-alone datbase without a backend Oracle database. TimesTen is a comprehensive database full and includes the persistence and the HA according to the needs. Many customers use TimesTen in this way. To do this, you must:

  1. to install time only install the abd TimesTen IMDB do not install TimesTen IMCD (in-memory database cache) option.

  2. in the configuration data store (s), do not include in your ODBC attributes everything related to implementing caching Oracle.

  3. understand that while TimesTen can act as a cache for oracle data and supports much of the same SQL etc. Oracle, there also a lot of differences from oracle. Such a difference is that TimesTen does not have the various V$ tables Oracle's. When you use TimesTen you yourself need to restrict things that supports the TimesTen.

  Chris

• Is it normal for a Macbook Pro operate at a temperature of more than 60 degrees celsius with only the navigation? Left side warms also many...

  My Macbook Pro Late 2011 very hot especially on the left side. Temperature exceeds the 60 degrees celsius, with only the navigation. Is this a normal behavior? Fans operate at a SPEED of 2000 more or less. I would like the experts to guide...

  From what you say, it seems that your MacBook fans work as usual (and unfortunately), and 60ºC is a good temperature for a MacBook Pro, so I don't think that there is nothing wrong with your Mac. Note that the temperature may also depend on what websites visit you and complete what they use. for example, Java and Flash Player increases CPU utilization and the battery, and this, temperature.

  In addition, note that your MacBook Pro is made of aluminum, and it can quickly become hot even if you don't do any heavy task. This does not mean that there is nothing wrong with it

• How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

  How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

  This just started happening the last two days.  I tried to add the url to my list to activate in Internet Options, also to accept the list for windows firewall. I rebooted and restored.

  It is annoying when I can't access Web sites on my PC.  There is no control parenting, nor is it a reason to be since I'm 57 years old, single, live alone and have no children, and not to mention that this isn't a single adult site. This is an auction site.  The same thing happens on a site of sports too.

  Hello

  Thank you for writing to Microsoft Communities.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on the computer?

  2. what version of Internet Explore do you use?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Start Internet explorer with the mode without modules and check.

  Click Start, all programs, accessories, System Tools, and click Internet Explorer (No Add-ons).

  If the problem does not persist in Internet Explorer (No Add-ons), then it is one of the Add-ons at the origin of this problem. Please follow the steps below to locate the problem the weak module:

  a. restart IE normally.

  b. click on tools.

  c. click on Manage Add-ons.

  d. disable add-ons by clicking on them one at a time to highlight and then click Disable.

  e. reactivate modules one by one and check with what add-on, you get this error message.

  f. turn off the add-on at the origin of the problem.

  For your reference: http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  (For Windows Vista)

  Method 2: How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  Follow these recommended steps and after if you still experience the problem.

• After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I am on Windows Vista.

  After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I picked up at an earlier date and reloaded the software TT 3 times with the same result. I tried of caraa start windows Explorer by using the Task Manager, but it does not work.

  Hi AndyCantore,

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.