Creating a DVD

Similar Questions

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Creating a DVD of FCP 10.2.3

  I have a new iMax 27 without a DVD slot. I know that DVDs are endangered but I need to share some works that I have and with a max of 2.5 MB 'broadband' streaming is not an option that my project is more than 65 GB. How others got on and what path they took the selection of actions / export of FCPX to create a DVD. Ideally, I'd still use iDVD I have on another computer, because the models are so good in iDVD

  You can export from FCP direct X on DVD: file-> sharing-> DVD. It's a pretty basic DVD, without all the themes and iDVD stuff, but it works.

• F10 - create video DVDs from the recorded TV show

  When I try to create a DVD of a television recorded my Qosmio F10 program, I get the message next-
  "Media in the CD/DVD drive is not writable by Media Center"
  I know that the media is writable by the normal Windows but under Media Center Qosmio, it does not work on any format of DVD - DVD slide show, video or data.
  Any ideas?
  TIA,
  Them

  Hello

  I found information that the upgrade of the driver may solve the problem.
  In addition, you can check this link. There are new interesting useful und on Media Center.

  http://www.fStop-Blues.com/2005/04/Windows-Media-Center-tip-burn-DVR-MS.html
  http://www.Microsoft.com/windowsxp/mediacenter/using/DVD/burntvtodvd.mspx

  Good bye

• Can I create recovery DVDs after installing Windows XP Home edition?

  Hello

  I have a laptop Toshiba Satellite L300. I formatted the c drive and installed windows xp, but soon I realized that I forgot to create a recovery disk.
  Now the F8 does not work, but the drive d and hddrecovery the folder that contains the files of Toshiba recovery still exists. 3.8 GB of data is located in this folder.

  Is it possible to create a recovery disk now. Thanks already.

  Hello

  Recovery DVDs can be created with the special tool only. The name is Toshiba Recovery creator. This tool is part of the Vista installation only factory settings.

  So now, you can not create recovery media and there is no way to launch the installation of F8 HARD drive recovery. I do not understand why you ignored Toshiba reminder on creating recovery DVDs.
  Anyway, you can order the new copy under https://backupmedia.toshiba.eu/landing.aspx

  Bye and good luck!

• Portege R600 - cannot create recovery DVDs

  Hello! I just bought Toshiba Portege R600-146 and attempted to create a DVD with the system recovery but DVD drive does not recognize DVD discs and fails the diagnostic test PC CD/DVD Toshiba. I can't even create a backup of the system.

  Is it a software fault (Mat * a DVD - RAM UJ - 844 S USB Device drivers or compatibility with Windows 7) or the material, and how can this be resolved?

  Hi Dmitry_3,

  Have you already checked if the CD/DVD drive is properly recognized in Device Manager or it appears with a yellow exclamation point?

  In this case, it might help remove upper and lower filters:
  + 1) run Regedit (start-> Run-> Regedit).
  + 2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} +.
  + 3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters". +
  + 4) reboot. +

• Satellite P300-22 how many DVD should I prepaire 4 creating recovery DVDs

  I'm french too, so don't be afraid of my mistakes 'no more! '

  I have a Toshiba Satellite P 300, and I want to create a recovery DVD.
  How many DVDs to 4.7 GB / by, if I prepaire for this creation?

  Thank you
  in fact, I have a Toshiba P300-22F,
  There is a hard drive failure, because I changed the C: partition size
  I have to restore the player to factory default state using the recovery DVD,
  but I don't create this DVD.

  One of my friends has a model Toshiba P300 - 1 5.
  so I try to create this DVD form his computer...

  Hello

  At first I want to give you advice on DVD, you must use. For a successful recovery creation DVD use DVD-R virgins. I created several media recovery on the models of different laptops, with DVD-R media always worked.

  On the market there are several portable Satellite and Satellite Pro P300 and image is not the same for each of them.
  Just for info:
  -Satellite P300-1GL I needed a blank media only, but
  -for Satellite Pro P300-149 I needed two of them

  So I think that you need one. When you start 'Toshiba Recovery Disc Creator' and choose the media you want to use it, you will be informed how many of them do you need.

  Good bye

• How to create a DVD with DVD Studio Pro and an external DVD burner?

  Hello

  I am trying to create a DVD with DVD Studio Pro. My internal DVD drive no longer works. I have an external DVD burner - slim portable DVD writer. I create the project into DVD Studio Pro, and when in the program, it works fine when I "stimulate". Well, I can't burn it.  When I look for the external DVD writer in my finder, it is not and I don't know how or where to select the option so it is programmed to burn the external DVD writer. Any advice? Thank you have a great week.

  I found a thread that has addressed this issue, but does not help me to solve my problem. Meg the dog was told this to her in question written by Scott Stark. I tried his solution of generation and format, but after pressing the burn a window appears saying "insert disc please insert acceptable DVD recordable media."  I tried to use another blank DVD, it did not help. I use Word for Word, I heard that those who are the best blank DVDs, you can buy. Thanks again for your time!

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• Creating Windows DVD won't finish burning

  From: pafos

  Problem - DVD burned with Windows DVD maker not fianalize Amend will be will not play back on normal household players

  After spending a considerable amount of time and money (on blank media) trying to produce a DVD that will play on my Panasonic player normal, that I gave up. If you Google this problem there are a lot of people out there with the same problem then why not can it be 'fixed' once and for all by SM.

  I tried to burn a slideshow of photo from Windows Live Photo Gallery, but she is spit out the disc at the end of 98.8%. R DVD plays perfectly on the PC but not the standalone player.

  I even tried to change the types of burners and media, but they all gave the same problem. The disc is not finalized.

  I can burn the DVD with the third-party software and these play fine, even, if I use XP pro, all is well so it's down to Vista I'm afraid. I have the latest version of Vista sp1 and all the drivers etc are up to date.

  In view of the foregoing can recommend a decent software that will burn DVD properly with Vista AND produce photo jpeg slide shows?

  Thanks in advance for any help

  Peter

  De : John Inzer

  (scroll down for some links that may help you with Windows DVD Maker)

  You can use Movie Maker or PhotoStory 3 to create slideshows.

  Photo Story 3 For Windows http://tinyurl.com/4f869 or...

  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx (this is an XP application but many users report success works on Vista)

  The following freeware can be your solution to create video DVDs.

  DVD Flick

  http://www.dvdflick.NET/

  Be sure to read the Guide:

  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick... try the following direct link:

  http://tinyurl.com/3wcglh

  or...

  http://voxel.dl.sourceforge.net/sourceforge/dvdflick/dvdflick_setup_1.3.0.2.exe

  Save the file to a folder on your hard drive and install from there.

  Tutorials:

  Tutorial DVD Flick

  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC

  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Windows DVD Maker:

  Windows Vista-

  Help and how: creating Windows DVD

  http://tinyurl.com/yusbhl

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/search.aspx?=&qu=DVD+Maker

  Windows Vista-

  Windows DVD Maker: Burn a DVD-video disc

  http://tinyurl.com/38qgzd

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/help/27a0225d-260e-4313-8a82-7c5253e93e6f1033.mspx

  Windows Vista - Burn photos and movies on a DVD-video disc using Windows DVD creation

  http://tinyurl.com/3xtcfs

  or...

  http://windowshelp.Microsoft.com/Windows/en-us/help/5633ddcd-46a8-4d8e-82E1-2506401a60261033.mspx

  John Inzer MS - MVP

  Digital media experience

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Create a DVD combining Jpeg photos and moving images MP4

  With a camera Sony DSC H 70, we took still photos, panoramic shots and and animated images that are in the MP 4 format.

  With PMB, we can see the images in motion like a reading of films.

  How can we create a DVD that reads in fashion Pan panning and moving like a movie images.

  With a camera Sony DSC H 70, we took still photos, panoramic shots and and animated images that are in the MP 4 format.

  With PMB, we can see the images in motion like a reading of films.

  How can we create a DVD that reads in fashion Pan panning and moving like a movie images.

  ==========================================

  You can do the Panning... with Photo Story 3.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/download/en/details.aspx?ID=11132
  (works on XP, Vista and?) Win7?)

  This is not a full tutorial, but should be enough to help you started...

  First be sure that the photo is less than 7200 x 7200 pixels pixels.

  Import a panoramic photo in Photo Story 3 and move on
  the screen "tell your photos and customize the animation."
  (do not remove the black borders)

  On the left, click Custom animation...

  Check the box on the screen to customize the animation...... "specify
  Start and end Position of the movement "." Resize and reposition the
  Start management Position and final Position you prefer and
  on the left, click the Preview button to see the result.

  Also you can import multiple instances of a photo and
  Pan from point A to point B in the first instance,... then point B
  point c on the second instance and so on.

  When the effects of movement are completed you can add music if
  you want and go to the screen "Save Your Story."

  You can left click on the 'Settings' button for several choices of
  resolution... the profile of 1024 x 768 is perhaps a good choice.

  Also... Choose a backup location and a name for your video.

  To save the project as a. WMV video file... click Next
  last time.

  Then you can import that video as well as other photos and
  video clips in DVD Maker to create your DVD. If you have
  problems with the video clips you may need to convert to MP4
  paste them into WMV format before importing in creation of DVD.

• Video playback in the media player in windows (Vista) is perfect. But when I create a dvd in Windows DVD Maker and read the dvd, the sound is off by a fraction of a second on the dvd. Is this a setting problem?

  After burning a dvd, the audio is a fraction of a second offshore on playback of dvd-video.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Check if that helps.

• Create simple DVDs of several

  I have the DVD of my in-laws birthday, as well as each of their memorial services, each of the three events is on a separate DVD.

  All together, they come to less than 2 GB, so we want to copy the three files in one DVD for each of our sons, so that each would have a DVD with all three events on it.

  Each of the three DVD has the same file structure:
  VIDEO_TS\
  VIDEO_TS\VIDEO_TS. BUP
  VIDEO_TS\VIDEO_TS. IFO
  VIDEO_TS\VIDEO_TS. VOB
  VIDEO_TS\VTS_01_0.BUP
  VIDEO_TS\VTS_01_0.IFO
  VIDEO_TS\VTS_01_1.VOB
  VIDEO_TS\VTS_01_0.VOB

  I appreciate any help you can give me!

  Deina

  VOB files are video files.

  If you're running Vista Home Premium or Ultimate
  You may be able to import the VOB files in Windows
  DVD Maker just as they are. If they will matter not as
  VOB files... you might try to rename their. MSGM if this
  also fails, you will need to convert them to the. WMV
  format.

  See the following articles:

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  (1) creating video DVD with Windows DVD Maker (part 1)
  http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-(part-1).aspx

  (2) creating video DVD with Windows DVD Maker (part 2)-
  Add your photos and videos, and definition of the order of play
  (part-2)---Adding-Your-Pictures-and-Videos,-and-Setting-the-Play-Order.aspx http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-

  (3) creating video DVD with Windows DVD Maker (part 3)-
  Set playback and DVD burning & DVD Menu Customization Options
  (part-3)---Setting-the-DVD-Burning-and-Playback-Options---Customizing-the-DVD-Menu.aspx http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-

  (4) creation of video DVD with Windows DVD Maker (part 4)
  http://allcomputers.us/Windows_7/creating-video-DVDs-with-Windows-DVD-Maker-(part-4).aspx

• Windows Movie Maker - DVD edition gives an error "cannot create the DVD-catastrophic failure."

  Try to publish the storyboard to DVD table. Opens in windows DVD Creator but when burning process is proceeding stops encoding and message appears "unable to create the DVD-catastrophic failure" of ideas where I'm wrong.

  Through the resolution as indicated here: -.

  http://www.WinMatrix.com/forums/index.php?/topic/18361-catastrophic-failure/

  S.Sengupta Media Center MVP

• Problem creating Windows DVD? Or Windows Movie Maker problem?

  Hello!  I created a slide show in Windows Movie Maker, which plays on my computer without problem.  Now, I try to burn it to a DVD by using the Windows DVD authoring application.  I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.

  I press play and start my video, but he plays 16 seconds and everything goes black.  Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film.  I burned 3 DVD and it did the same thing.

  Can someone help me with what I'm doing wrong?

  Hi Khsb14,

  Have a. you been able to watch the video before burning?

  B. did burn the DVD?

  C. is the DVD burner connected properly

  D. is the audio work after the 16^th s?

  E. do you have a mistake when he went to the black screen?

  This could be a problem with the burner DVD or the method of engraving. Try the following methods.

  Method 1

  Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.

  1. In the ready to burn DVD page, click Preview.
  2. To read the DVD preview, click play in the control screen.
  3. To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
  4. To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.

  Check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  Method 3

  Choose a speed slower burn to your DVD recorder as follows:

  • 1. Return to the Add pictures and video to the DVD page and then click on Options.
    2. In the DVD burning speed box, select medium or slow.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think