creating a project aggregator using .exe files

Similar Questions

• Lost project - can use the files transcoded to yet?

  I had a serious accident on my system, and if I was able to restore most from a backup, I have a project where the source files have disappeared. I have the files transcoded in encore, it's xxx.ac3, xxx. M4V and xxx.m4v.xmpses. I can read the reminder film, but is it possible that I can make a video of these files? The format is Blu Ray. I tried to write to the directory of the BD and BD .iso file, but when I try to play, I don't have the sound, the video is just a black scree.

  Best regards

  Ulf

  That sounds about right.

  From windows Explorer, you can play the file xxx.m4v?

• How to use image files in another library project?

  I put the images of resource in another project of library due to the limitation of the size.

  So I create another project and put the files in the folder "res".

  So how can I use them? They have a unique way for me to invoke?

  Example:

  Project 1: (added project2 to build the path)

  |

  |

  Project 2:

  -res

  (some jpg png files)

  1 project wants to use the files in the project 2.

  How should I use that?

  I think that this thread covers the same ground as you go on:

  http://supportforums.BlackBerry.com/T5/Java-development/how-can-I-place-resources-in-a-separate-cod/...

  It may be another option?

  http://supportforums.BlackBerry.com/T5/Java-development/resource-Installer-to-SD-card-application-SA...

• Running a .exe file that is created from the Captivate project

  Hello

  I am using Captivate 4. When I create a .exe of my captivate project file and run it to say slide 3, the next time I open the .exe - it connects the Traghetti where I left off (slide 3 in this case).

  Is there a way to make the project start from the beginning, whenever I run the .exe file?

  Thank you!

  Uncheck the box in the Publisher of skin for the self-paced learning

  

• Create an .exe file

  Hi guys. I want to turn my VI in an .exe file that I want to run it on another pc. How can I do? I have to install labview also on the other pc?

  Thank you

  You will need the length of LabVIEW engine (RTE) that corresponds to the version used to create the .exe, i.e. 2012 if created with 2012, 2013, if 2013. Unless you need a specific feature 64 bit I also suggest creating in 32 bits. A 32-bit .exe, with 32-bit appropriate LabVIEW RTE, will run on a 32-bit or 64-bit machine, was created in 64-bit only runs on 64-bit computers.

  As noted in previous posts, unless the version of LabVIEW Development package at the request of the manufacturer (professional development for example) would need you the add-on Application Builder.

• DAQBase or mx to create Labview 8.0 exe files

  I fight to create an EXE file using the Labview 8.0 software and a USB 6008 module. Is this possible? I want to distribute the EXE file to others running just the runtime Labview 8.0.

  Thank you

  Tim

  Ok... I wish that this was documented somewhere!

  When you use the USB-6008... LabVIEW 8.0... and the creation of distribution EXE files:

  If your running Windows XP, then the old version of NiDaqmx 8. XX works very well, however does not allow NiDaQmx assistant in one of the VI

  Older versions of NiDaqmx don't work with Windows 7 or 8... Everything install perfect... the driver install... but the 6008 never appears in the list of devices.

  Solution: even if the documentation says that new versions of NiDaqmx do not work with Labview 8.0 they work very well. You don't have to install the runtime of 8.0 and then no problem.

  I spent countless hours to find all this... Once you install the wrong version of NiDaqmx... you must uninstall completely all the components for the new version to install correctly.

  I hope this helps someone else to throw the computer out the window like I almost did!

  Concerning

  Tim Alls

• How to open an EXE file created with multimedia Builder

  I have to open some video files, which raise a series of my language class, and all of them are created in multimedia builder 4.9.7.8 version by some techinique of this school. And they show in. EXE file. who can help to let me know how to open it? Thks.

  Hi Robin,
   
  -What happens when you try to open the files now?
  -Don't you get ay code error or error message? If Yes, indicate the same.
   
  You need to use the software to open this type of file.
   
  Contact the school Department to get the same thing and then you can open the files successfully.

• Import previously created the project file as. MSWMM files will now open in WMM.

  After you import a video file multimedia. While displaying the file in WMM I was bursting of the file in the headings concerned by creating several files in my imported originl file. I had more before edit I would do later, he not published at this time. I saved the file as a project using the default value. MSWMM format. When I try to recover the project I get the following message:
  Split F:\Video\Editing videos\tape2 file. MSWMM cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file.

  Double click on the file to open WMM but does not load the file.

  Windows Vista
  Windows Movie Maker V6 Bld 6002 SP 2

  Can you help me please?

  Hi John, sorry I couldn't you respond without creating another user ID.
  There are no files listed in WMM when I double click the. MSWMM project file I want to edit further. There is a brief display in the video box 'Preview size 434 x 326'.
  There is nothing on the screen at all, if I then try to open the same file again, I get a response that the file is in use to choose file anther
  I use the same computer to download and edit my videos, not switching files either, other than my project and video files. MSWMM files are stored on an external hard drive.

  Thank you for your interest

  ===============================================
  I'm really grabbing at straws here because I have no idea what happened
  but there is always the original source files in the same exact place as
  they were when you created the project?

  I wonder if it may be interesting to try to copy your source files of your
  system drive (C :)... then again the project and save it (C :).)

  Sorry I don't have a more positive response.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Topics created by other authors using TFS and HR do not appear in the project

  I use Robohelp HTML 10 and TFS 2010.

  We are 4 writers working on a same project.

  The project has been successfully added to TFS and worked well with an author.

  Other authors have recently begun to work on the project, but I noticed that the topics created by other authors do not appear my version of the HR project.

  Here you can see the files that have been added to the table of contents, but these files do not appear in my project.

  

  The files are in TFS and appear in my local working folder, but not in my project. When I generate the WebHelp, he finds the missing files.

  I had to import the files into my project to see. This seems to defeat the purpose of the use of source code control with many writers working on a same project.

  Is there something that we put in place to make this work correctly?

  Someone at - it seems this before? Any help would be appreciated.

  Hello

  What happens if you delete the PCD file before opening the project? RoboHelp see new files?

  You can try the following:

  1. Click Tools > Options
  2. On the general page, select "delete the project (file .cpd) cache before you open any project.

  Take a bow

  Willam

• Impossible to compile files from Java or create Java project

  Hello
  I can not compile the java files and also did not see an option for creating java project using flex builder 2.
  In fact I'm trying to create a FDS project with an option to compile on the server. I use my server Weblogic 8.1 SP5.
  
  Thank you
  Dim

  Let me see if I understand the question: you want a single IDE which has
  two types of it projects: Flex projects and some Java
  projects. If your Navigator view might look like this:

  MyJavaProject
  MyClass.java
  MyFlexProject
  MyApp.mxml

  What you trying to do? If so, then my guess is, perhaps, you
  the 'stand-alone' Flex Builder version, not the version of "plugin".
  Is one of the first questions posed by Setup if you want to install
  "Flex Builder and Flex SDK", or «Flex Builder plug-in and Flex SDK» If you
  to Java projects as well as projects in Flex Builder, you must choose the
  second option. See this image:

  http://www.Morearty.com/blog/wp-content/uploads/2006/05/Installer.PNG

  Note that if you do this, then you must first install Eclipse version 3.1.2
  of http://www.eclipse.org. (The current version of the eclipse is 3.2, but)
  We are always in the previous version, 3.1.2).

  Hope that helps. -Mike

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• Create the Project File Name Prefix makes space after prefix

  I am creating a project template.  I noticed that when I put in the file name prefix it prefixes all my screws with this value MORE space.  I like the prefix but do not want the space.  Does anyone know how to make sure that when it renames all the screws it does not insert space after the preifix?

  See attachment.

  Thanks for any direction on it.

  Add the following in your LabVIEW INI file token:

  NewProjectNoAddedSpaceOnPrefix = TRUE

  This will prevent the dialog box create a project to add the namespace for the prefix.

• create the executable (*.exe) file

  I could create and executable file (*.exe), but it does not all libraries (*.dll) necessary, IE NIVIsSVc.dll, imaq1349.dll... So I was wondering if someone could guide me to create an executable file with all the necessary libraries to run on a different machine? I have LabView 8.2.1 and XP OS. My *.exe file is to capture an image of the camera (FirWire 1394) and save it in a file on the hard drive.

  Thank you

  Shaun

  SC1,

  Unfortunatley LabVIEW get where the drivers have been installed since. This is to ensure that the same versions of the driver are in LabVIEW and the installation program that you created. The best way to work around this problem in your situation is to reinstall the drivers from your hard drive. You can download the drivers on our website linked below. In the future if you plan to create many installers, copy the contents of the CD driver on your hard drive and install from there. I made a suggestion of product in the past, to make it an easier process. If you want that this so, please visit our product suggestion Center below the link.

  Drivers
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  Suggestion of products Center
  http://digital.NI.com/applications/PSC.nsf/default?OpenForm

• Impossible to use variables shared when deploying an exe file

  I tried to use variables shared for some time. I have been all over the forums and still have had no luck. I can get these VI to work until I have install on another PC while they do any work. I don't know what I'm doing wrong. I forced libraries to deploy, but they still do not work on the machine, that I install the exe file. I don't think that libraries are being installed. I can't see in the Distributed System Manager. I can see libraries on other machines, but not on the one that I have.

  Have you included libraries in section always included the source files.  You did, and then change the destination of the library of media files on the Source code file settings tab?

  In the code are you using the correct path when calling the libraries deployment method.   Current path of the VI should be stripped twice and have "data\name.lvlib" built in the end.

• I use windows XP and I can't run or open any .exe files and all my icons on my desktop turned into .lnk files. What can I do to fix this?

  I use windows XP and I can't run or open any .exe files and all my icons on my desktop turned into .lnk files.  What can I do to fix this?

  Looks like your .exe file association has been broken.

  Visit the following site and follow the instructions to restore the associations for .exe files.  Make sure to read the note at the top about the additional steps to restore the .exe file associations

  'Windows XP file Association problems'
    <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW