Creating a table with a while loop
I want to create a table using a while loop but I don't know how to do it. Basically, I want to do the same thing as in the image of the example VI in LabVIEW VIs, called 'Graph XY Data Types.vi' example, but with a while loop instead of a for loop. The reason why I want to do with a while loop is because LabVIEW will not faint error or VISA data thanks to a for loop.
LabVIEW certainly enable you to pass out a mistake or VISA through a loop for. The default value is autoindex output and thus creating a table but is a simple right-click on the tunnel exit to change that. For recent versions, it changes the Tunnel mode to "last value". You can also use a shift register.
Tags: NI Software
Similar Questions
-
Why the execution time increases with a while loop, but not with "run continuously?
Hi all
I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.
I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).
I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.
After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.
I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»
Thanks a lot for your help!
Your SetReset_DO VI creates a channel whenever it is called. And that you never delete a task.
When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again. When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.
Just as you open and close your file outside the loop for, create your channel out of the loop.
Lynn
-
How to create a table with no lines to the left or to the right?
If I create a table with say 5 columns and 15 lines, how not to do a vertical line (border) to the left and to the right of the table while keeping the boundary up and down? Is that possible or I just put a white box on the left and the right?
IDCS3
There are a few methods that work. Here is one.
(1) select your table cells
(2) open the race Panel
3) click the blue lines of the proxy image in the Panel of stoke to deselect the lines inside and high and low lines
(4) 0 the value of the weight of the race (or change the color of the None swatch)
Oh and for the love of your fellow designers or the person that allows you to edit your work in the future... do NOT use a white box to hide the traits of lines and columns in the table.
HTH
-mt
-
5.6.1 pages: How to create a table with more than 999 lines?
5.6.1 pages: How to create a table with more than 999 lines?
The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.
-
How to create a table with these dimensions?
Still new in Indesign, but I need to create a table like the one below.
Select the text tool, I created a block of text and then insert a table. However, I'm lost as to how to change the top line for the length of the two columns from the bottom.
I looked at the options of panel paintings, but it only allows me to change the number of lines and columns.All advice is appreciated. Thank you.
You must create a table with two rows and two columns.
To select the first line and click "merge cells".
-
How to create a table with muse?
How can I create a table with muse?
Muse do not support building tables at this time.
However, you can add HTML table to the object-> the option Insert HTML code as a way to get around this.
http://www.w3schools.com/HTML/html_tables.asp
You can even try lining up a few text boxes with or without contour applied to create a tabular look editable in design mode.
Thank you
Vinayak
-
Create the table with the environment variables
Hi all
When an event occurs, I would create a table by a planning procedure.
I can create a table with these last or similar syntax:
create table % s_ %t in select acme_ * from a;
I would use this syntax because this event could be spend more time per day and so I can check.
is this possible?
Thank you very much
Ciao
AlbertoAlbertofro wrote:
Hi all
When an event occurs, I would create a table by a planning procedure.
I can create a table with these last or similar syntax:create table % s_ %t in select acme_ * from a;
I would use this syntax because this event could be spend more time per day and so I can check.
is this possible?Thank you very much
Ciao
AlbertoTo dynamically create a table, you must use EXECUTE IMMEDIATE. If you want your table to be padded with timestamp name you can do it with the function TO_CHAR and SYSDATE.
An example
execute immediate 'create table acme_' || to_char(sysdate, 'DDMMYYYYHH24MISS') || ' as select * from a';
-
How to create a table with editable column values.
Hello world
I think it's very simple, but I am unable to find how to do this. This is my requirement. I need to create a table with n columns and 1 line initially. the user must be able to enter data into this table and click of a button must insert the data into the database table. Also, there should be a button at the bottom of the table to add 1 line to the table.
I know how to do the insertion of data, but can someone please let me know how to create a table which allows the user to enter data and how to create a line button Add 1?
Thanks in advance!Raghu,
Go through the tutorial of Toolbox Page & Advanced section of the Guide of the OFA table.
Step 1 - you need to create EO & VO from this EO. This EO will be table of database where you want to insert the data.
Step 2 - create an advanced table region. (See this section in table advanced for more details)
Step 3 - attach this VO in the BC4J region advanced Table component.
Kind regards
GYAN -
create a table with 2000 records
Hello
can someone guide me to create a table with 2000 records
the columns and data types are as follows
number of inventory_item_id
number of organization_id
number of process_flag
transaction_type varchar
number of set_process_id
number of min_minmax_quantity
number of max_minmax_quantity
process_flag is always have a value of 1, set_process_id always has the value 3 and transaction_type should be done with the update and the remaining columns will have different values
kindly guide me
thanking in advanceIt doesn't really matter what you... just trying to generate the insert statement in excel first on each row and then cut and paste... and make sure that they are syntactically correct before running each other and engage
-
Creating the table with time stamp
I need to create the table with the data inside buffer
Can you help me pls
If it works today,
create the table test_04NOV2010 in select * from product where product_code = '101'
If executed tmrw,
create the table test_05NOV2010 in select * from product where product_code = '101'
can is it you pls let me know how to use it in PL SQLdeclare v_date varchar2(25); v_sql varchar2(20); begin select to_char(sysdate,'DDMONYYYY') into v_date from dual; v_sql := ' create table ' ||TEST||'_'||'v_date'|| ' as ' ' select * from Product where product_code = '101' EXECUTE IMMEDIATE v_sql; end;
Can you help me pls
Thank you very muchdeclare v_date varchar2(25); v_sql varchar2(2000); --Noted this. this was also small. begin select to_char(sysdate,'DDMONYYYY') into v_date from dual; v_sql := ' create table TEST_'||v_date|| ' as select * from Product where product_code = ''101'''; EXECUTE IMMEDIATE v_sql; end;
You can use the Q operator also.
DECLARE v_date varchar2(25); v_sql varchar2(2000); BEGIN select to_char(sysdate,'DDMONYYYY') into v_date from dual; v_sql := ' create table TEST_'||v_date|| Q'[ as select * from Product where product_code = '101']'; EXECUTE IMMEDIATE v_sql; END;
Published by: mohamed on November 4, 2010 05:32
-
How to create a table with two unique columns
How to create a table with two unique columns. I use the following syntax below and I get the error message such unique or primary key already exists.
create the table COPQ_WORKCELL_GOAL
(
Type_id varchar2 (4) NOT NULL UNIQUE,
Tyle_Location varchar2 (30) NOT NULL UNIQUE,
Type_Description varchar2 (20).
KEY elementary SCHOOL (Type_id)
);Use 1 or the other column type_id;
create table COPQ_WORKCELL_GOAL ( Type_id varchar2(4), Tyle_Location varchar2(30) NOT NULL UNIQUE, Type_Description varchar2(20), PRIMARY KEY (Type_id) ); Table created drop table COPQ_WORKCELL_GOAL; Table dropped create table COPQ_WORKCELL_GOAL ( Type_id varchar2(4) primary key, Tyle_Location varchar2(30) NOT NULL UNIQUE, Type_Description varchar2(20) ); Table created
-
Create a table with all kinds of oracle data types?
Hello
who can give me a small example to create a table with all kinds of oracle data types? and the example to insert it?
Thank you
RoyHello
Read the fine manual. It contains examples at the end of the chapter.
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_7002.htm
I don't know if you know that you can also create your own data types using 'create a type '. So look for examples that are of your interest and not for all types of data.
Concerning
Published by: skvaish1 on February 16, 2010 15:33
-
How to create a table with auto-numbering?
I want to create a table with a default value of column to the increase in whole number. The first thought came to me, is to use the sequence. I find in google than following create statement
get ORA-04044: procedure, function, package or type is not allowed here.create table etl_stats1 (run_time date,arr_rows int,lid int default nextval('etl_req'));
There are discussions described here uses the trigger to do the job. But that does not support by default in a sequence, it seems so average.You must create a sequence and a trigger:
SQL> create table etl_stats1 (run_time date,arr_rows int,lid int) 2 / Table created. SQL> create sequence etl_seq; Sequence created. SQL> create or replace 2 trigger etl_stats1_bir 3 before insert 4 on etl_stats1 5 for each row 6 begin 7 select etl_seq.nextval into :new.lid from dual; 8 end; 9 / Trigger created. SQL> insert into etl_stats1 (run_time,arr_rows) values(sysdate,99) 2 / 1 row created. SQL> select * from etl_stats1 2 / RUN_TIME ARR_ROWS LID -------- ---------- ---------- 15:38:41 99 1 SQL>
SY.
-
Operation on line on table with a For loop
Hello
I work with a wide range of dimensions column one. I'm doing the following
for i = 1:size (A) / 2
B (i, :) = A (1 + (i-1) * 2:i * 2))
So, for example if
A =.
0
1
2
3
4
5
6
7then
B =
0 1
2 3
4 5
6 7My approach was to use a subset of the table inside the loop for to select several items, but I don't know how to transpose the selected items in a new line to create the table (B) is there a simpler approach?
Thank you
Mike
try experimenting with the table to reshape feeding your table entry and re-sizing for a 2d aray of output. It is much faster to use a loop For, because the data is never moved and LV just changes the dimensions of the matrix and updates the stride.
Ben
-
Add new values to an existing 1 d table in a while loop
Hello
I have a while loop that collects data from a DAQ Assistant and stores it in a 1 d table. The number of rows is defined by the user. I'm trying to average of data for each iteration of the loop. So far, I'm only able to get the table to smash the previous table with the new values.
If the number of loops = 3
First iteration second iteration third iteration 1 d New Array [divide by loop #]
4.97 4.99 4.98 14.94 for the average]
4.97 4.99 4.98 14.94
4.96 4.98 4.97 14.91
4.98 5.00 4.99 14.97
4.97 4.99 4.98 14.94I would like to make it as broad as possible because the number of loops will vary depending on user input.
Maybe you are looking for
-
Try to restore the image of personal lost and family photo albums.
Original title: i ' am try to restore the image personal all'my and wos det of the photo album of family in my computer crash computer library befor i ' am try to restore the image personal all'my and family album photos in my computer det disappered
-
Windows malware removal tool (February) install failure
Monthly. I would have to wait until this installed, but cancelled after waiting half an hour. Now marked "failed". -I clicked on the icon to try again. No results. * One I don't have a chance?
-
Cannot install 3050 has on surface
whenever I try to install the printer (using USB AND wireless), I get a message "Enter the WPS PIN code for your printer". He says I can find it on the printer deskjet 3050 has - but I can't. Help, please
-
I have a home network working via ethernet and a router. My company laptop is connected to it through etherenet and go to my home office which has the printer (Photosmart 7520) attached to it via USB. My laptop at home print via wifi. I use outlook 2
-
Is there a place to download the API and source of pots for the lib of RIM? I find the API behind online a lot, and it would be good to have a source JAR to work in my IDE.